Resistex Miks LED Downlight

This document provides installation instructions and safety information for the Resistex Miks LED downlight.

Options / Accessories

The Miks downlight offers options for adjustable orientation and low luminance.

Adjustable Orientation

The fixture can be adjusted for directional lighting. This involves attaching or detaching a ring to enable or disable the swivel mechanism.

Diagram 1: Shows the fixture with a ring, indicating it can be detached.
Diagram 2: Shows the fixture with the ring removed, and an arrow indicating it can be reattached.
Diagram 3: Illustrates the fixture with the ring attached and rotated, demonstrating its adjustable functionality.

Low Luminance

A specific diffuser can be attached to achieve low luminance output.

Diagram 1: Depicts the fixture with a standard diffuser.
Diagram 2: Shows the fixture with a different, low-luminance diffuser being attached.
Diagram 3: Presents the fixture with the low-luminance diffuser correctly installed.

Installation Instructions

Follow these steps for proper installation:

Step 1: Cutout Preparation
Mark and cut a circular opening in the mounting surface with a diameter of Ø69mm (+/-1mm). A template or the fixture's diameter is shown for reference.
Step 2: Fixture Insertion
Insert the Resistex Miks downlight fixture into the prepared cutout from below.
Step 3: Securing the Fixture
Rotate the fixture within the ceiling opening to engage its securing mechanism.
Step 4: Wire Connection Preparation
The power cable is shown entering a connector block.
Step 5: Opening the Connector
Open the connector block, typically by lifting a lever or clip.
Step 6: Inserting Wires
Connect the Live (L), Neutral (N), and Earth (PE) wires to their corresponding terminals within the open connector block.
Step 7: Closing the Connector
Close the connector block, ensuring the wires are securely held in place.
Step 8: Final Securing
The fixture is fully inserted into the ceiling. Spring clips on the fixture engage with the mounting surface to hold it firmly.
Step 9: Connection Verification
A close-up view shows the wiring connection. A diagram indicates correct wire insertion (✔️) and incorrect connection (❌).
Step 10: Completed Installation
The Resistex Miks downlight is shown installed flush with the ceiling surface.

Safety Notes

Important: Never work on the luminaire when it is live (under voltage).

Installation must be performed by a professional installer, adhering to all relevant electrical installation standards and regulations.

Electrostatic Discharge (ESD) Risk: Handle the fixture with necessary precautions to prevent damage from static electricity.

Please observe all instructions and mounting steps carefully.

Maintenance Instructions

Do not use chemical or abrasive products to clean the fixture.

Keep these instructions for future dismantling or maintenance. Additional information about Resistex luminaires can be found on the website www.resistex-sa.com.

Resistex cannot be held responsible for any misuse of the product.

	Resistex Miks LED Downlight Installation and Safety Guide Comprehensive installation instructions and safety guidelines for the Resistex Miks LED downlight, detailing mounting, electrical connections, and maintenance. Includes technical specifications and certifications.
	Resistex Miks LED Downlight Installation Guide and Safety Instructions Comprehensive installation guide for the Resistex Miks LED downlight, covering safety notes, maintenance, and step-by-step assembly instructions. Features adjustable and low-luminance options.
	Resistex Miks Downlight: Installation, Safety, and Maintenance Guide Comprehensive guide for installing the Resistex Miks downlight, including safety and maintenance information. Learn how to properly install this adjustable, low-luminance lighting fixture, ensuring compliance with electrical standards.
	Resistex Miks LED Lighting Fixture Installation Guide Comprehensive installation instructions for the Resistex Miks LED spotlight, including safety precautions, step-by-step mounting procedures, and maintenance advice. Features adjustable and low luminance options.
	Resistex Miks LED Downlight Installation Guide Comprehensive installation instructions and safety guidelines for the Resistex Miks LED downlight, detailing adjustable and low-light mounting options, wiring, and maintenance.
	Resistex Miks Lighting Fixture Installation Guide Detailed installation instructions, safety guidelines, and maintenance advice for the Resistex Miks lighting fixture. Includes technical specifications and company contact information.
	Resistex Miks LED Downlight Installation Guide Step-by-step installation instructions for the Resistex Miks LED downlight, including safety precautions, mounting procedures, and maintenance advice.
	Resistex Miks LED Luminaire Installation Guide Official installation instructions for the Resistex Miks LED luminaire. Includes safety notes, mounting steps, and technical specifications. Features adjustable orientation and low light options.