T3246-2BU-C Lighting Fixture Assembly and Installation Guide

Assembly Instructions

1. Attach the lamp body (A) and the decorative metal slat (B) to the canopy (C) using the nut (D) to secure.
2. Connect the power cords (E) of the dimmer: connect the dimmer's short wire to the black fixture wire.
3. Install the mounting plate (F) on the outlet box with the screws (G).
4. Connect the fixture wire to the circuit wire with the wire nuts (H): black wire with live wire, white wire with neutral wire, ground wire with ground wire. Turn the wire nuts to twist the wires together. Wrap the wire nuts with insulated rubber tape.
5. Fix the canopy (C) to the mounting plate (F) with the screws (J).
6. Put the lampshade (K) around the lamp holder and secure the shade with the socket ring (L).

Please consult a qualified Electrician if you are not familiar with electrical wiring. ?

Wiring Diagram Description

The diagram illustrates the wiring process with an outlet box. It shows connections from the outlet box's ground wire, live wire, and neutral wire to the fixture's corresponding wires using wire nuts (H). Labeled components include the outlet box, ground wire, live wire, neutral wire, and fixture parts A through L, such as the lamp body (A), canopy (C), mounting plate (F), lampshade (K), and socket ring (L).

Recommended Bulb Shape

The fixture is compatible with incandescent and halogen bulbs. Recommended bulb shapes and their dimensions are:

• ST58: Height 5.2", Diameter 2.3"
• A60: Height 4.3", Diameter 2.37"
• T45: Height 4.4", Diameter 1.7"

The dimmer is applicable for incandescent bulbs and halogen bulbs. ✔️

Assembled Fixture Visual

A visual representation shows the completed two-shade lighting fixture, typically mounted.