ITEM NO. :B3313-2BU ASSEMBLY INSTRUCTIONS
Assembly Steps
- Place the glass shade (A) and socket cup (B) around the lamp holder. Insert the socket ring (C) into the socket spanner (D) and secure the glass shade by screwing the socket ring into the lamp holder.
- Install the mounting plate (E) onto the outlet box using the screws (F).
- Loosen the hex nuts around the bolts (G) and screw in or unscrew the bolts from the junction box to adjust the length for installation.
- Connect the fixture wire to the circuit wire using wire nuts (H): connect the black wire to the live wire, the white wire to the neutral wire, and the ground wire to the ground wire. Twist the wires together with the wire nuts. Wrap the wire nuts with insulated rubber tape.
- Attach the canopy (J) to the mounting plate (E) using the ball nuts (K).
- Screw the bulb (L) into the lamp holder.
Please consult a qualified Electrician if you are not familiar with electrical wiring.
Recommended Bulb Shape
C35 Bulb: Approximately 3.9 inches (9.9 cm) in height and 1.38 inches (3.5 cm) in width.
G45 Bulb: Approximately 3 inches (7.6 cm) in height and 1.77 inches (4.5 cm) in width.
Assembly Diagram Description
The assembly diagram illustrates the installation process of the lighting fixture. It shows:
- An outlet box connected to the ceiling, housing the house wiring: Ground Wire, Live Wire (typically black), and Neutral Wire (typically white).
- A mounting plate (E) secured to the outlet box with screws (F).
- The fixture's internal wires (ground, live, neutral) connected to the corresponding house wires using wire nuts (H).
- Bolts (G) extending from the junction box for mounting, with hex nuts used to adjust their length.
- A canopy (J) that attaches to the mounting plate (E) via ball nuts (K).
- The lamp holder assembly, comprising a socket spanner (D), socket ring (C), socket cup (B), and the glass shade (A). The socket ring (C) secures the glass shade (A) to the lamp holder assembly.
- A bulb (L) ready to be screwed into the lamp holder.
