ITEM NO. :T3290BU

Assembly Steps

1. Attach the aluminum frame (A) to the canopy (E) using the screw to secure.
2. Install the mounting plate (B) on the outlet box with the screws (C).
3. Connect the fixture wire to the circuit wire with the wire nuts (D): black wire with live wire, white wire with neutral wire, ground wire with ground wire. Turn the wire nuts to twist the wires together. Wrap the wire nuts with insulated rubber tape.
4. Fix the lamp body (E) to the mounting plate (B) with the screws (F).

Please consult a qualified Electrician if you are not familiar with electrical wiring.

Diagram Descriptions

Diagram 1: Illustrates the connection of wires from an electrical outlet box to a lighting fixture. It labels the outlet box, ground wire, live wire, neutral wire, black wire, white wire, mounting plate (B), screws (C), wire nuts (D), canopy (E), and aluminum frame (A). It also indicates screws (F) used to attach the lamp body (E) to the mounting plate (B).

Diagram 2: A close-up illustration of a hand using a screwdriver to fasten a screw into a mounting plate with multiple holes.

Diagram 3: Shows the aluminum frame (A) and the lamp body (E) as separate components.

Diagram 4: A frontal view of the lamp body (E).

Diagram 5: A frontal view of the aluminum frame (A).