ITEM NO. :B3216-2BU-J

Installation Steps

1. Place the lamp body (A) on the canopy (B) and secure with the nuts (C).
2. Install the mounting plate (D) on the outlet box using the screws (E).
3. Loosen the hex nuts around the bolts (F) and screw in or unscrew the bolts from the junction box to get the right length for installation.
4. Connect the fixture wire to the circuit wire using wire nuts (G): black wire to live wire, white wire to neutral wire, ground wire to ground wire.
5. Fix the lamp body (A) to the mounting plate (D) using the ball nuts (H).
6. Place the lampshade (J) around the lamp holder, put the silicone washer (K) around the lamp holder to protect the glass shade, and secure the shade with a socket ring (L).
7. Screw the bulb (M) into the lamp holder.

Diagram Description

The diagram illustrates the assembly of the lighting fixture. It shows the connection points to an electrical outlet box, including live, neutral, and ground wires. Key components are labeled: A (lamp body), B (canopy), C (nuts), D (mounting plate), E (screws), F & G (bolts and wire nuts), H (ball nuts), J (lampshade), K (silicone washer), L (socket ring), and M (bulb). The wiring connections involve matching fixture wires (black, white, ground) to the corresponding circuit wires.

Important Notes

Please consult a qualified electrician if you are not familiar with electrical wiring.

In view of thermal expansion and contraction, avoid securing the glass shade too tightly when screwing the socket ring into the lamp holder, or you will break the glass shade.