ITEM NO. : T7260-3CU

Installation Steps

1. Install the mounting plate (A) on the outlet box with the screws (B).
2. Connect the fixture wire to the circuit wire by wire nuts (C): connect the black fixture wire to the live wire, the white fixture wire to the neutral wire, and the ground wire to the ground wire.
3. Fix the canopy (D) to the mounting plate (A) using the screws (E).
4. Screw the bulb (F) into the lamp holder.

Please consult a qualified electrician if you are not familiar with electrical wiring. ?

Wiring Diagram Description

The diagram illustrates the connection of the lighting fixture to an outlet box.

Components shown:

• Outlet Box: The electrical junction box mounted in the ceiling.
• Circuit Wires: Wires originating from the outlet box, typically labeled as Ground Wire, Live Wire (often black), and Neutral Wire (often white).
• Fixture Components:
  • Mounting Plate (A): Secured to the outlet box with screws (B).
  • Fixture Wires: These connect to the circuit wires.
  • Wire Nuts (C): Used to connect the fixture wires to the circuit wires.
  • Canopy (D): Covers the mounting plate and wiring, attached with screws (E).
  • Lamp Holder: Where the bulb is installed.
  • Bulb (F): The light source.

Connection Process:

• The ground wire from the outlet box connects to the fixture's ground wire.
• The live wire (black) from the outlet box connects to the fixture's black wire using a wire nut (C).
• The neutral wire (white) from the outlet box connects to the fixture's white wire using a wire nut (C).
• The mounting plate (A) is attached to the outlet box with screws (B).
• The canopy (D) is then attached to the mounting plate (A) with screws (E).
• Finally, the bulb (F) is screwed into the lamp holder.

A symbol ? indicates rotation, likely for tightening the bulb or canopy.