Shoe Cabinet

Important Information & Safety

Important Information

• Please read the entire manual before starting assembly and/or use.
• Follow the manual thoroughly and keep it for future reference.

Assembly Tips

Avoid Scratches

Assemble on a soft layer, such as a rug, to prevent scratching the furniture. ?️

Improve Efficiency

Try to find a partner to assist with installation to speed up the process. ?

Anti-Topple Warning

Overturned furniture can cause serious or fatal crush injuries. ⚠️ To prevent tipping, ensure you use the wall attachment (if not included). Purchase a suitable wall attachment for your wall. Seek professional advice if unsure. Follow all instructions carefully. ?

Important Maintenance Note

• Periodically re-tighten all screws: 2 weeks after assembly and every 3 months to ensure stability. ?
• Cleaning: For the frame, use a rag dipped in neutral detergent, wipe, and dry with a clean rag. For glass, use glass cleaner and a dry rag. ?
• Do not use an electric screwdriver or excessive force during installation, as the board can break easily. ⚡❌

Tools and Parts Required

Tools

• Measuring tape ?
• Pencil ✏️
• Hammer ?
• Screwdriver (Phillips head) ➕
• Drill (for wall mounting) ?️

Parts List

Assembly Steps

Step 1: Prepare Panels

Hammer parts F1 (x6) and F2 (x6) into the designated holes on panels 2 and 3 as shown. Ensure they are inserted straight to avoid damage. ?

Insert wooden tenons H (x4) into the corresponding holes on panel 1. ?

Step 2: Assemble Main Frame (Part 1)

Attach panels 1, 4, and 5 to panel 3 using screws A (x8) and washers/connectors G (x8). ? Diagram shows panel 1, 4, 5 connecting to panel 3. Screws A go through holes in 1, 4, 5 into pre-drilled holes in 3. G is placed over the screw head on the inside of panel 3.

Step 3: Assemble Main Frame (Part 2)

Attach panel 2 to panels 1, 5, and 4 using screws A (x8) and washers/connectors G (x8). ? Diagram shows panel 2 connecting to the assembly from Step 2. Screws A go through holes in 2 into pre-drilled holes in 1, 5, 4. G is placed over the screw head on the inside.

Step 4: Attach Back Plate and Dowels

Fix back plate 9 to the rear of the assembled frame using screws N (x24). ? Gently tap wooden dowels I (x4) into the bottom edge of the frame as shown. ?? Diagram shows screws N being inserted around the perimeter of panel 9. Dowels I are shown being inserted into the bottom edge.

Step 5: Assemble Drawer Mechanisms and Handles

Fix plastic parts L (Left) and R (Right) to the drawer side mechanism parts 8 using screws B (x24). ? Attach these assembled drawer mechanisms (part 8 with L&R) to the drawer front/base parts 6 using screws B (x18). ? Fix handles D (x3) to the front of drawer parts 6 using screws E (x6). ? Diagram shows L&R attaching to 8 with B. Then 8 attaching to 6 with B. Then D attaching to 6 with E.

Step 6: Insert Drawer Shelves

Attach drawer shelves 7 to the assembled drawer components (part 6) using screws B (x6). ? Diagram shows shelf 7 being attached to the inside of the drawer assembly (part 6) with screws B.

Step 7: Attach Drawer Slides to Cabinet Sides

Fix the plastic parts (L&R) of the drawer slide mechanism to the inside of cabinet side panels 2 and 3 using connectors F3 (x6). ⚙️ Then, secure these slides using screws C (x6) to tighten. ? Diagram shows L&R parts being attached to panels 2 and 3 with F3 and C.

Step 8: Insert Drawers

Slide the assembled drawers (containing part 7) into the cabinet, aligning them with the installed slides. ➡️ Diagram shows arrows indicating insertion of the drawers.

Step 9: Secure Drawer Shelves

Using screws B (x6), fix the drawer shelves 7 to the plastic parts (L&R) of the drawer slides on both sides, as shown. ? Diagram shows screws B being used to secure the shelf 7 to the drawer slide mechanism (L&R) on the inside of the drawer.

Step 10: Wall Mounting Preparation

First, attach bracket connectors J (x4) to cabinet panels 2 and 9 using screws K (x2). ? Next, determine the desired position for the shoe cabinet on your wall and fix wall mount brackets M (x2) securely to the wall. Ensure the drill hole size is appropriate (e.g., Ø6x30mm as suggested). ??️ Finally, connect the cabinet to the wall mounts by attaching bracket connectors J (already on the cabinet) to the wall mount brackets M using screws A (x2). ? Diagrams show J attached to panels 2/9 with K. Then M attached to wall. Then J attached to M with A.

Step 11: Secure with Straps

Use cable ties/straps P (x2) to further secure the cabinet to the wall, ensuring stability and preventing tipping. ? Diagram shows straps P being used to connect the top of the cabinet to the wall.

Warranty Information

Warranty Claims

• There is a 30-day warranty for broken furniture or functional issues, starting from the purchase date (proof required).
• For claims, contact FUFU&GAGA with your purchase order number and problem details. Replacement parts will be arranged within 48 hours. If out of stock, a shipping date will be provided.
• Product must be used according to instructions for health reasons.
• Returns for other reasons must be cleaned, dried, and made within 30 days of receipt.

Type of Warranty Claim

• Failure to follow instructions invalidates the warranty.
• Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility

• FUFU&GAGA is not responsible for misuse, user damage, or loss of parts during installation.
• Damage and scratches after use are not covered by the warranty.

Warranty Coverage (US)

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns Policy

Changed Your Mind?

Follow the retailer's instructions for returns if you have simply changed your mind. ↩️

Defective Items

If your item is defective and the cause is unclear, please contact FUFU&GAGA first. ?

Damaged Items

If you receive an order with obvious shipping damage, refuse delivery. If damage is found after acceptance, follow the retailer's specific instructions. ?? Always save all packaging material and paperwork for the order. Disposing of packaging or attempting returns without contacting the fulfillment provider may jeopardize your claim and credit. ?