Product Instruction

Warning

Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:

• Place heaviest items in the lowest drawers.
• Do not set TVs or other heavy objects on the top of this product.
• Never allow children to climb or hang on drawer, door, or shelves.
• Never open more than one drawer at a time.
• Use of tip-over restraints will only reduce, but does not eliminate, the risk of tip-over.
• Never open more than one drawer at a time.

Maintenance Tips

Tip: Avoid spraying liquids or allowing them to infiltrate the product surface.

Tip: Never use chemical cleaning products, as they can damage the finish.

Tip: To avoid dulling the finish, do not place furniture in direct sunlight.

Tip: Do not place plastic or rubber rings under appliances; use felt protectors instead.

Tip: To clean, use a soft or slightly damp cloth, and then wipe with a clean, dry cloth.

Important Information

German: Wichtige Information - Sorgfältig und aufmerksam lesen - Diese Information aufbewahren

English: Safety information - Important information - Please read closely and carefully - Save this information

Cam Lock Mechanism

Correct Usage: The nut should be centered in the cam lock when two panels are joined. The cam lock should be inserted before the nut. (Diagram shows correct insertion).

Incorrect Usage: Diagrams show incorrect insertion of cam lock and nut.

German Explanation: Wenn die beiden Platten verbunden sind, sollte die Mutter in der Mitte des Nockenschlosses sein. Die Nockenverriegelung sollte vor der Mutter eingeführt werden.

Hardware List

• A (28pcs): Screws
• B (28pcs): Screws
• C (81pcs): Screws
• D (1pc): Bracket
• E (10pcs): Dowels
• F (5pcs): Wooden Dowels
• G (4pcs): Screws
• H (3sets): Cam Lock Sets (H1, H2, H3, H4)
• I (2pcs): Handles
• J (2pcs): Handles
• K (6pcs): Screws
• L (5pcs): Screws
• M (26pcs): Screws
• N (2pcs): Screws
• O (2pcs): Screws

Parts List

• 1: Top Panel
• 2: Bottom Panel
• 3: Side Panel (Left)
• 4: Side Panel (Right)
• 5: Drawer Front
• 6: Drawer Side (Left)
• 7: Drawer Side (Right)
• 8: Drawer Back
• 9: Drawer Bottom
• 10: Shelf
• 11: Shelf Support
• 12: Drawer Slide (Runner)
• 13: Back Panel
• 14: Drawer Slide (Cabinet)
• 15: Door
• 16: Door Hinge
• 17: Drawer Slide Component

Assembly Steps

1. Step 1: Attach part 4 to part 3 using hardware A (x8), E (x4), H2 (x3), H4 (x3). (Diagram shows parts and hardware connection).
2. Step 2: Attach part 14 (cabinet slides) to parts 3 and 4 using hardware A (x8), E (x6), H2 (x3), H4 (x3). Also attach part 17. (Diagram shows parts and hardware connection).
3. Step 3: Attach part 7 to part 3 using hardware B (x4). (Diagram shows parts and hardware connection).
4. Step 4: Attach part 8 to part 3 and part 7 using hardware B (x4). (Diagram shows parts and hardware connection).
5. Step 5: Attach part 7 to part 8 and part 14 using hardware B (x8). (Diagram shows parts and hardware connection).
6. Step 6: Attach part 4 to part 8 and part 14 using hardware B (x6). (Diagram shows parts and hardware connection).
7. Step 7: Attach part 2 to part 3 and part 4 using hardware A (x6). (Diagram shows parts and hardware connection).
8. Step 8: Attach part F (wooden dowels) to part 2 using hardware F (x5), L (x5). (Diagram shows parts and hardware connection).
9. Step 9: Attach part 2 to parts 3 and 4 using hardware B (x6). (Diagram shows parts and hardware connection).
10. Step 10: Insert part 13 (back panel) into grooves. Attach part 15 (door) and part 17. (Diagram shows back panel insertion and door attachment).
11. Step 11: Attach part 1 to parts 3 and 4 using hardware A (x6), C (x1), D (x1). (Diagram shows parts and hardware connection).
12. Step 12: Attach part 1 to parts 3 and 4 using hardware B (x6). (Diagram shows parts and hardware connection).
13. Step 13: Assemble drawer components using hardware C (x26), M (x26). (Diagram shows drawer assembly).
14. Step 14: Attach drawer slides to the cabinet. Step 14.1 shows attaching a slide to part 1. Step 14.2 shows attaching part O. Step 14.3 shows attaching part J. This step uses J (x2), O (x2). (Diagrams show slide attachment).
15. Step 15: Assemble drawer sides (6, 7) and back (8) to drawer front (5) using hardware C (x30), G (x3), H1 (x6), K (x6). This is for multiple drawers (x3). (Diagram shows drawer assembly).
16. Step 16: Attach drawer slides to the assembled drawers using hardware C (x12), H3 (x6). (Diagram shows slide attachment to drawers).
17. Step 17: Attach part 16 (hinge) to part 1 and part 15 (door) using hardware C (x4), G (x1), I (x2), N (x2). (Diagram shows hinge attachment).
18. Step 18: Attach the door (part 15) with hinges to the cabinet (part 3 or 4). This uses hardware C (x8). (Diagram shows door installation).

Safety Information: Tip-Over Prevention

Weight Capacity: The top of the unit can support up to 25 LBS, and the drawers can support up to 70 LBS each. (Diagrams illustrate weight limits).

Tip-Over Warning: Serious or fatal crushing injuries can occur from furniture tip-over. To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lowest drawers.
• Do not set TVs or other heavy objects on the top of this product.
• Never allow children to climb or hang on drawer, door, or shelves.
• Never open more than one drawer at a time.
• Use of tip-over restraints will only reduce, but does not eliminate, the risk of tip-over.

German Warning: Schwere oder tödliche Quetschverletzungen können durch Umkippen von Möbeln auftreten. Um das Risiko schwerer Verletzungen und Todesfälle durch Umkippungen weiter zu reduzieren.

Tip-Over Prevention Diagram: One diagram shows a correctly anchored cabinet, while another shows a cabinet tipping over with a person being crushed.

Important Safety and Installation Guidelines

German Section:

Sicherheitshinweise (Safety Information)

WICHTIG: The assembly of the furniture must be carried out strictly according to the assembly instructions and by a qualified person. All electrical and sanitary installations must be performed exclusively by authorized personnel.

To prevent furniture from tipping over, it must be securely anchored to the wall. Improper assembly or lack of wall anchoring can lead to functional impairments, damage, and/or severe injuries.

Due to the wide variety of walls and wall materials, no fastening material is included. Please consult a specialist dealer for suitable fastening material corresponding to your structural conditions. You are responsible for anchoring to the masonry and the materials used.

Adhere to the maximum weight specifications provided in the assembly instructions. Keep hardware bags, parts, and packaging material away from infants and children, as they contain small, swallowable parts that pose a choking hazard.

Failure to follow operating or assembly instructions, replacing components, making product modifications, or using consumables not matching original parts will void all liability and warranty claims. GERMANIA is not liable for personal or material damage resulting from improper assembly or failure to anchor the item to the wall. No liability is assumed for overloading caused by people, playing children, or other influences.

Questions about products or services: 24 hours online Email: feedbackstation@163.com

English Section:

Safety Information

IMPORTANT: It is imperative that the furniture be installed according to instructions by someone properly qualified to complete the task. Installation of electrical or plumbing fixtures should only be performed by trained professionals.

The furniture must be anchored to the wall to prevent it from tipping over. Improper installation or failure to use wall fasteners can prevent the item from functioning properly and may cause damage and/or severe injury.

Wall fasteners are not included because of the large variety of walls and wall materials. Please ask a specialized dealer for wall fasteners appropriate to your specific needs. You are responsible for anchoring the items to the wall and for the materials used for that purpose.

Please observe the maximum load capacity as specified in the assembly instructions. Keep the bag containing the fittings, the fittings themselves and other packaging material out of reach of babies and children. The small parts can be swallowed and therefore pose a choking hazard.

Failure to follow handling, operation or assembly instructions, exchanging components, making changes to the product or using materials which differ from the original parts will result in voiding all liability claims and warranties. GERMANIA accepts no liability for personal or material damage due to improper installation or failure to properly anchor the item to the wall. We assume no liability as manufacturer for excessive loads placed on a unit by individuals, playing children or other causes.

Questions about products or services: 24 hours Online Email: feedbackstation@163.com

Product Registration for Safety Alert or Recall Only

We will use the information provided on this card to contact you only if there is a safety alert or recall for this product.

We will not sell, rent, or share your personal information.

To register your product, please complete and mail the bottom part of this card, or email your contact information, the model name and number, and date of manufacture of the product, as provided on this card, to: feedbackstation@163.com

Registration Form:

• Model Name: [Field for Model Name]
• Manufacture Date: [Field for Manufacture Date]
• Model Number: [Field for Model Number]
• Name: [Field for Name]
• Mail Address: [Field for Mail Address]
• City: [Field for City]
• Phone Number: [Field for Phone Number]
• E-mail: [Field for E-mail]
• Zip Code: [Field for Zip Code]