FUFU&GAGA Shoe Cabinet Assembly and Warranty Guide

Important Information

Please read the entire manual thoroughly before starting to assemble and/or use this product. Keep it for further reference.

Assembly Tips:

Avoid Scratches: Assemble this furniture on a soft layer, such as a rug, to prevent scratches.
Improve Efficiency: Try to find a partner to install with you to speed up the process and shorten the time.

Anti-Tipple Warning

Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase a wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

Important Maintenance Note

It is important that any product assembled using screws is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the product's lifespan.

For regular maintenance and cleaning:

For the frame, use a rag dipped in neutral detergent, wipe fully, and then dry with a clean rag.
For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag.

Do not use an electric screwdriver, and do not use too much force when installing, as the board is easy to break.

Tools and Parts Required

Tools:

Screwdriver (Phillips head)
Hammer
Measuring Tape
Level

Hardware:

Dowels (A): x2 (Used in steps 4, 5)
Screws (B): x17 (Ø 6 x 30 mm) (Used in steps 4, 5, 7)
Dowels (C1): x6 (Used in step 3)
Dowels (C2): x6 (Used in step 3)
Screws (C3): x6 (Ø 4 x 10 mm) (Used in step 8)
Screws (D): x36 (Ø 3.5 x 14 mm) (Used in steps 1, 2, 10)
Screws (E): x6 (Ø 4 x 10 mm) (Used in step 8)
Screws (F): x6 (Ø 4 x 20 mm) (Used in step 1)
Handles (G): x3 (Used in step 1)
Screws (H): x4 (Ø 1.5 mm) (Used in step 6)
Screws (I): x10 (Ø 2.5 x 14 mm) (Used in step 6)
Part (J1): x1 (Used in step 4)
Screws (J2): x1 (Ø 4 x 12 mm) (Used in step 4)
Part (J3): x1 (Ø 6 x 30 mm) (Used in step 7)
Plastic Parts (L&R): x3 pairs (Used in steps 1, 8)
Screws (R): x3 (Ø 4 x 40 mm) (Used in steps 1, 2)

Main Cabinet Components:

Panel 1: Top Panel (x1)
Panel 2: Left Side Panel (x1)
Panel 3: Right Side Panel (x1)
Panel 4: Back Panel (x1)
Panel 5: Shelf (x3)
Panel 6: Base Panel (x2)
Panel 7: Drawer Front (x3)
Panel 8: Drawer Side (x3)
Panel 9: Drawer Back (x3)
Panel 10: Drawer Bottom (x1)

Assembly Instructions

Step 1

Fix plastic parts L&R to panel 8, use screw D to tighten. Attach this part to panel 6 and 10 using screw D to corresponding holes as shown. Assemble handle G to panel 6 and 10 using screw F.

Step 2

Attach panel 7 to the assembled part using screw D slightly to tighten, as shown.

Step 3

Hammer dowels C1 and C2 slightly into the holes on panels 2 & 3. Note: Do not tilt to avoid damage.

Step 4

Fix part J1 to panel 1 using screw J2. Connect panel 1 with panel 3 using wooden dowels A at first. Then use screw B to tighten, as shown. Attach panels 5 and 9 to panel 3 using screw B as well.

Step 5

Attach panel 2 to the assembled part in step 4, using screw B and wooden dowels A as shown.

Step 6

Fix panel 4 to the back of the assembled unit using screw I to pre-drilled holes as shown. Fix part H on the bottom.

Step 7

Find a proper height, fix part J3 to the wall as shown. Using screw B to tighten, this could prevent anti-tipping.

Diagram shows fixing a bracket to the wall with screws.

Step 8

Fix the plastic parts L&R to panels 2 & 3 by using C3 slightly. Then screw E to tighten as shown.

Step 9

Insert panel 7 to the middle of the drawers.

Step 10

Using screw D to fix panel 7 to both side plastic parts as shown.

Warranty Information

Warranty Claims

There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase, which must be verified by proof of purchase.
Before making a claim, please visit feedbackstation@163.com for further information. The After-sale Team will endeavor to answer all messages within 48 hours. Please provide your purchase order number and details of the problem for replacement parts.
The product must be used in accordance with the instructions provided.
For returns, the furniture must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

Failure to follow the furniture instructions will invalidate the warranty.
Does not include damage during installation, but includes damage during transportation.

Scope of Responsibility

No responsibility will be borne for misuse, user damage, or loss of parts during the installation of furniture.
Damage and scratches after using the furniture are not covered by the warranty.

Warranty Coverage Areas:

Sheet parts: 1 month from the date of purchase.
Electrical parts: 1 month from the date of purchase.

Returns Policy

Changed Your Mind?

If you have purchased and simply changed your mind, follow the retailer's instructions for returns.

Defective Items

If your item is defective in any way and you cannot identify the cause, please consult the FAQ section at feedbackstation@163.com for a potential solution.

Damaged Items

If you receive an order with obvious shipping damage, refuse the delivery. If delivery has been accepted and shipping damage is found, please follow the specific instructions advised by the retailer.

In all circumstances, please save all packaging material and paperwork for the order. Disposing of packaging material or attempting to return merchandise without contacting the fulfiller may jeopardize your chances of making a claim and receiving a credit.

	FUFU&GAGA Cupboard Assembly Instructions and Warranty Information Comprehensive guide for assembling the FUFU&GAGA Cupboard, including parts list, step-by-step instructions, and warranty details.
	FUFU&GAGA Shoe Storage Cabinet Assembly Instructions & Manual Comprehensive assembly guide for the FUFU&GAGA Shoe Storage Cabinet. Includes detailed step-by-step instructions, parts list, important safety warnings, and warranty/returns information. Ensure correct assembly for optimal stability and longevity.
	FUFU&GAGA KF210120-01 Shoe Cabinet Assembly Instructions Comprehensive assembly guide for the FUFU&GAGA KF210120-01 shoe cabinet, featuring step-by-step instructions, parts list, tool requirements, safety warnings, and warranty information. This manual helps users assemble their furniture safely and efficiently.
	FUFU&GAGA Night Table Assembly Instructions and Safety Guide Comprehensive assembly instructions, safety warnings, and maintenance tips for the FUFU&GAGA Night Table / Shoe Storage Cabinet (Model KF020233-01). Learn how to safely build and care for your furniture.
	FUFU&GAGA Hall Tree Assembly Instructions Comprehensive assembly guide for the FUFU&GAGA Hall Tree, featuring detailed steps, hardware lists, parts identification, safety warnings, and warranty information for building your cabinet.
	FUFU&GAGA Shoe Cabinet Assembly Instructions and Safety Guide Comprehensive assembly instructions, maintenance tips, and safety warnings for the FUFU&GAGA shoe cabinet. Includes hardware and parts lists, and product registration information.
	FUFU&GAGA Sideboard Assembly Instructions and Warranty Comprehensive assembly guide, parts list, safety warnings, and warranty information for the FUFU&GAGA Sideboard (Model LJY-KF020328-01).
	FUFU&GAGA Sideboard Assembly Instructions, Warranty, and Returns Detailed assembly guide for the FUFU&GAGA Sideboard, including a parts list, step-by-step instructions, safety warnings, anti-tipping device installation, hinge adjustment, warranty information, and returns policy.