Shoe Storage Cabinet

Version: 09/15/2022

Important Information & Safety

IMPORTANT INFORMATION! Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference. ❓

AVOID SCRATCHES! In order to avoid scratching, this furniture should be assembled on a soft layer, such as a rug. ⚠️

IMPROVE EFFICIENCY! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ?

ANTI-TOPPLE WARNING! Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment. If not included with this product, please purchase a wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully. ⚠️

IMPORTANT! It is important that any product assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the lifespan of the product. ⚙️

For regular maintenance and cleaning of the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break. ?

Parts List

Please prepare the following tools and ensure each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

Part ID	Description	Quantity
A	Screw	35
B	Cam Lock	35
C	Wooden Dowel	9
D	Bracket	2
E	Screw	42
F	Foot Peg	4
G	Handle	4
H1	Plastic Part	3
H2	Knock-in Part	6
H3	Side Plate	6
H4	Knock-in Part	6
I	Anti-Tipping Device Part	2
J	Screw	2
K	Hinge	2
L	Screw	8
M	Reinforcement Part	16
N	Screw	16
O	Screw	2
P	Screw	12

Part Dimensions:

A: Ø 6 x 35 mm
B: Ø 15 x 10 mm
C: Ø 6 x 30 mm
E: Ø 4 x 12 mm
F: (No specific dimension given, visual implies a peg)
G: (No specific dimension given, visual implies a handle)
H1: (No specific dimension given, visual implies a plastic bracket)
H2: (No specific dimension given, visual implies a metal insert)
H3: (No specific dimension given, visual implies a side plate)
H4: (No specific dimension given, visual implies a metal insert)
I: (No specific dimension given, visual implies a wall anchor)
J: Ø 4 x 40 mm
L: Ø 4 x 16 mm
M: (No specific dimension given, visual implies a metal plate)
N: Ø 3 x 16 mm
O: Ø 4 x 12 mm
P: Ø 4 x 14 mm

Assembly Instructions

Step 1

Parts needed: A (x13), H2 (x3), H4 (x3), Screw Ø 6 x 35 mm.

Action: Insert quickfit screw (A) into corresponding holes in No.8 and both sides of No.4 plate with a screwdriver. Knock parts (H2, H4) into corresponding holes in No.9 plate as shown.

Visual Description: This step involves preparing base and side panels. Screw (A) is inserted into pre-drilled holes on part 8 and part 4. Parts H2 and H4 are inserted into designated holes on part 9. A 180-degree rotation symbol indicates a turning action for cam locks or similar fasteners.

Step 2

Parts needed: B (x5), C (x1).

Action: Connect No.2 and No.17 plate with No.9 using wooden dowel (C), then turn cam lock (B) clockwise to tighten. Attach No.8 plate to No.9 and turn cam lock (B) clockwise to tighten.

Visual Description: Part 2 and part 17 are joined to part 9 using dowel C and secured with cam lock B. Part 8 is then attached to part 9, also secured with cam lock B. A 180-degree rotation symbol indicates the tightening action of the cam lock.

Step 3

Parts needed: A (x16), H2 (x3), H4 (x3), Screw Ø 6 x 35 mm.

Action: Knock parts (H2, H4) into corresponding holes in No.3 plate. Insert quickfit screw (A) into corresponding holes in No.3 and No.4 plate with a screwdriver.

Visual Description: Parts H2 and H4 are inserted into part 3. Screw (A) is then inserted into pre-drilled holes on parts 3 and 4.

Step 4

Parts needed: B (x4), C (x2).

Action: Connect No.14 (x2) plates with No.9 using wooden dowel (C), then turn cam lock (B) clockwise to tighten.

Visual Description: Two parts labeled 14 are attached to part 9 using dowel C and secured with cam lock B. A 180-degree rotation symbol indicates the tightening action.

Step 5

Parts needed: B (x8), C (x3).

Action: Connect No.4 with No.14 (x2), No.2, and No.8 plate using wooden dowel (C), then turn cam lock (B) clockwise to tighten.

Visual Description: Parts 4, two parts 14, part 2, and part 8 are assembled together using dowel C and secured with cam lock B. A 180-degree rotation symbol indicates the tightening action.

Step 6

Parts needed: B (x4).

Action: Connect No.7 (x2) with No.9 plate, then turn cam lock (B) clockwise to tighten. Slide No.12 plate into available grooves.

Visual Description: Two parts labeled 7 are attached to part 9 using cam lock B. Parts labeled 12 are then slid into the designated grooves on the structure.

Step 7

Parts needed: B (x8), F (x4).

Action: Attach No.3 plate to the component, then turn cam lock (B) clockwise to tighten. Knock foot peg (F) into No.3 and No.4 plate.

Visual Description: Part 3 is attached using cam lock B. Foot pegs (F) are inserted into parts 3 and 4. A 180-degree rotation symbol indicates the tightening action.

Step 8

Parts needed: A (x6), D (x2), O (x2).

Action: Fix part (D) to No.1 plate with screw (O). Insert quickfit screw (A) into corresponding holes in No.1 plate with a screwdriver. Slide No.13 and No.15 plate into available grooves.

Visual Description: Bracket (D) is attached to part 1 using screw (O). Screw (A) is inserted into part 1. Parts 13 and 15 are slid into grooves.

Step 9

Parts needed: B (x6), C (x3).

Action: Cover No.1 plate to the top using wooden dowel (C) and turn cam lock (B) clockwise to tighten.

Visual Description: Part 1 is attached to the top of the structure using dowel C and secured with cam lock B. A 180-degree rotation symbol indicates the tightening action.

Step 10

Parts needed: G (x1), K (x2), L (x2), M (x16), N (x16), P (x4).

Action: Reinforce back plate using part (M) and screw (L). Fix hinge (K) to No.6 plate with screw (P). Fix handle (G) with screw (L).

Visual Description: Metal plates (M) are attached to the back panels using screws (L). Hinges (K) are attached to the door panel (part 6) using screws (P). Handles (G) are attached using screws (L).

Step 11

Parts needed: I (x2).

Action: Drill holes on your wall, and knock part (I) into holes.

Visual Description: This step illustrates drilling holes into a wall and inserting wall anchors (part I) for the anti-tipping device.

Step 12

Parts needed: J (x2).

Action: Install anti-tipping device using screw (J) as shown.

Visual Description: The anti-tipping device components (likely involving parts D and I from previous steps) are attached to the furniture and the wall using screws (J).

Step 13

Parts needed: E (x30), H1 (x3), G (x3), L (x6).

Action: Fix plastic part (H1) to No.5 plate with screw (E). Fix handle (G) with screw (L). Attach No.10 plate to No.5 by fixing with (H1) using screw (E). Attach No.11 plate to No.10 by fixing with (H1) using screw (E).

Visual Description: This step details the assembly of drawer fronts or doors. Plastic parts (H1) are attached to drawer/door panels (part 5) with screws (E). Handles (G) are attached with screws (L). Parts 10 and 11 are then attached sequentially to part 5 using H1 and E.

Step 14

Parts needed: H3 (x6), E (x6).

Action: Assemble drawers by fixing (H1) with side plates using (H3) and screw (E) as shown.

Visual Description: This step shows the assembly of the drawer boxes or door mechanisms. Side plates (H3) are attached to drawer/door components using screws (E).

Step 15

Parts needed: E (x6).

Action: Fix side of No.11 plate with (H1) using screw (E) as shown.

Visual Description: This step shows the final attachment of side pieces (part 11) to the drawer/door assembly using part H1 and screws E.

Step 16

Parts needed: P (x8).

Action: Attach No.6 door plate to side of the unit by fixing hinge with screw (P) as shown.

Visual Description: The main door (part 6) is attached to the cabinet frame using hinges and screws (P). Detailed diagrams show the precise alignment and attachment of the hinges.

Warranty Information

WARRANTY CLAIMS

There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase, which must be verified by proof of purchase.
Before making a claim, please call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
The product must be used in accordance with the instructions provided. For health reasons.
For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

Failure to follow the furniture instructions will invalidate the warranty. Attention please.
Does not include damage during installation, but includes damage during transportation.

Scope of Responsibility

Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
After using, the damage and scratches of the furniture are not covered by the warranty.

The Warranty Relates to All Bought in The Us and Covers The Following Areas

Sheet parts: 1 month from the date of purchase.
Electrical parts: 1 month from the date of purchase.

Returns Policy

CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?

PLEASE FOLLOW THE BELOW INSTRUCTIONS:

If you have purchased and have simply changed your mind, follow the retailer's instructions for returns.

DEFECTIVE ITEMS

If your item is defective in any way, i.e. it doesn't work but you can't identify why, in the first instance, please call us.

DAMAGED ITEMS

If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.

In all circumstances, please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.

	FUFU&GAGA Shoe Cabinet Assembly Instructions and Safety Guide Comprehensive assembly instructions, maintenance tips, and safety warnings for the FUFU&GAGA shoe cabinet. Includes hardware and parts lists, and product registration information.
	FUFU&GAGA KF210120-01 Shoe Cabinet Assembly Instructions Comprehensive assembly guide for the FUFU&GAGA KF210120-01 shoe cabinet, featuring step-by-step instructions, parts list, tool requirements, safety warnings, and warranty information. This manual helps users assemble their furniture safely and efficiently.
	FUFU&GAGA Night Table Assembly Instructions and Safety Guide Comprehensive assembly instructions, safety warnings, and maintenance tips for the FUFU&GAGA Night Table / Shoe Storage Cabinet (Model KF020233-01). Learn how to safely build and care for your furniture.
	FUFU&GAGA Hall Tree Assembly Instructions Comprehensive assembly guide for the FUFU&GAGA Hall Tree, featuring detailed steps, hardware lists, parts identification, safety warnings, and warranty information for building your cabinet.
	FUFU&GAGA Shoe Cabinet Assembly Instructions and Warranty Step-by-step assembly guide for the FUFU&GAGA shoe cabinet, including important safety warnings, parts list, maintenance tips, warranty details, and return policy.
	FUFU&GAGA Shoe Cabinet Assembly Instructions & Guide Detailed assembly instructions, parts list, and warranty information for the FUFU&GAGA Shoe Cabinet. Learn how to safely and efficiently assemble your 3-flip drawer shoe cabinet.
	FUFU&GAGA LJY-KF020283-01 4-Door Storage Cabinet Assembly Instructions Comprehensive assembly guide for the FUFU&GAGA LJY-KF020283-01 4-door storage cabinet, detailing all parts and step-by-step construction for safe and proper setup.
	FUFU&GAGA Sideboard Assembly Instructions and User Guide Comprehensive assembly guide for the FUFU&GAGA sideboard, featuring step-by-step instructions, parts list, tool requirements, and important safety information for proper installation and use.