PRODUCT INSTRUCTION

⚠️ WARNING

Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:

• Place heaviest items in the lowest drawers.
• Do not set TVs or other heavy objects on the top of this product.
• Never allow children to climb or hang on drawer, door, or shelves.
• Never open more than one drawer at a time.
• Use of tip-over restraints only reduces, but does not eliminate, the risk of tip-over.

MAINTENANCE TIPS

Tools Required For Assembly

Tools shown: Hammer ?, Electric Drill ❌ (not recommended), Screwdriver ?.

[Image description: Person with tools, showing a hammer and a screwdriver, with a crossed-out electric drill.]

Need Two or More People To Complete

[Image description: Two people struggling with a panel, then two people successfully carrying a panel.]

Assemble Item On a Clean Flat Surface

[Image description: Person trying to assemble on a rough surface with a cross, then assembling on a rug/clean surface with a checkmark.]

Important Notes

• Please check you have all hardware before assembling.
• Please ensure you have the name of the item and hardware part required and quantity.
• Please contact us by mail, if you have any questions, and we will reply you asap.
• Enjoy your new purchase!

Tips Before You Start

QUICKFIT

[Image description: Two diagrams showing panel connection. Left shows incorrect, right shows correct 'Shoulder' flush with 'Panel'.]

Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten.

CAM LOCK

[Image description: Two sets of diagrams showing cam lock fitting. Left shows 'CORRECT' with a checkmark ✔️, right shows 'WRONG' with a cross ❌.]

When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.

[Image description: Diagrams showing the correct alignment of the quickfit head in the center of the cam lock, and the cam lock being inserted before the quickfit.]

Quickfit head should be in the centre of the cam lock when the two panels are joined. Cam lock should be inserted before quickfit.

Turn cam lock clockwise to tighten. [Clockwise rotation symbol or text]

Parts List

[Image description: Exploded view of the night table showing numbered parts: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12. Part 10 is shown x3.]

Parts include: 1 (x3), 2 (x3), 3 (x2), 4 (x1), 5 (x2), 6 (x3), 7 (x1), 8 (x1), 9 (x1), 10 (x3), 11 (x3), 12 (x3).

Hardware List

Step 1

[Image description: Two panels shown with hardware A (cam bolts) and B (cam locks) being inserted.]

Insert 6x Hardware A (Cam Bolts) and 6x Hardware B (Cam Locks) into the designated holes on the panels.

Step 2

[Image description: Two panels shown with hardware C (dowel screws) being inserted.]

Insert 8x Hardware C (Dowel Screws) into the designated holes on the panels.

Step 3

[Image description: A structure being formed by connecting panels using hardware D (screws) and E (screws).]

Connect the panels using 4x Hardware D (Screws) and 4x Hardware E (Screws).

Step 4

[Image description: Another view of the structure being formed, connecting panels with hardware D (screws) and E (screws).]

Connect the panels using 4x Hardware D (Screws) and 4x Hardware E (Screws).

Step 5

[Image description: Two panels shown with hardware C (dowel screws) and F (screws) being attached.]

Attach panels using 4x Hardware C (Dowel Screws) and 3x Hardware F (Screws).

Step 6

[Image description: The main frame of the unit being assembled using hardware D (screws) and E (screws).]

Assemble the main frame using 4x Hardware D (Screws) and 4x Hardware E (Screws).

Step 7

[Image description: Drawer supports or slides being attached to the frame using hardware E (screws) and G (screws).]

Attach drawer supports using 4x Hardware E (Screws) and 4x Hardware G (Screws).

Step 8

[Image description: Drawer components being assembled using hardware H (screws) and J (screws).]

Assemble drawer components using 2x Hardware H (Screws) and 34x Hardware J (Screws).

Step 9

[Image description: Drawer fronts shown with handles or supports being attached using hardware H (screws).]

Attach drawer handles/supports using 16x Hardware H (Screws).

Step 10

[Image description: Drawer boxes being assembled using hardware K (screws), L (dowels), and M (dowels). This is shown repeated three times.]

Assemble 3x drawer boxes using 6x Hardware K (Screws), 3x Hardware L (Dowels), and 3x Hardware M (Dowels) for each drawer.

Step 11

[Image description: Drawer sides and bottoms being attached using hardware S (screws). This is shown repeated three times.]

Attach drawer sides and bottoms using 18x Hardware S (Screws) for each drawer.

Step 12

[Image description: Drawer runners or guides being attached to the drawer boxes using hardware K (screws). This is shown repeated three times.]

Attach 3x drawer runners/guides using 6x Hardware K (Screws) for each.

Step 13

[Image description: Drawer fronts being attached to the drawer boxes using hardware N (screws) and O (plastic caps). This is shown repeated three times.]

Attach 3x drawer fronts using 6x Hardware N (Screws) and 3x Hardware O (Plastic Caps).

Step 14

[Image description: Drawers being inserted into the main cabinet structure. Hardware P (screws) and Q (cam locks) are shown.]

Insert the 3x assembled drawers into the cabinet. Secure using 6x Hardware P (Screws) and 6x Hardware Q (Cam Locks).

Step 15

[Image description: Drawer handles or pulls being attached to the drawer fronts using hardware K (screws). This is shown repeated three times.]

Attach 3x drawer handles/pulls using 6x Hardware K (Screws).

Step 16

[Image description: The final assembly showing the back panel or feet being attached using hardware G (screws) and R (wall anchors - likely for securing to wall, but shown here for completeness of the diagram).]

Attach the back panel or feet using 2x Hardware G (Screws) and 2x Hardware R (Wall Anchors, if applicable for safety).