FUFU&GAGA Chest Assembly Instructions
Important Information
Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.
Safety and Assembly Tips
Avoid Scratches
To avoid scratching, this furniture should be assembled on a soft layer, such as a rug. [!]
Improve Efficiency
Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. [assembly helper]
Anti-Topple Warning
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully. [!]
Important Maintenance Note
It is important that any product assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the lifespan of the product.
Cleaning Instructions
For regular maintenance and cleaning of the product frame, use a rag dipped in neutral detergent, wipe fully, and then dry with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, as the board is easy to break.
Parts and Tools
Tools Required
Please prepare the following tools: [assembly helper]
- Screwdriver [screwdriver]
- Allen wrench [allen-wrench]
- Hammer [hammer]
- Measuring tape [tape-measure]
Hardware List
When installing, please carefully confirm whether each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.
| Part | Description | Quantity |
|---|---|---|
| A | Ø6 x 35 mm | x 25 |
| B | Ø14 x 9 mm | x 25 |
| C | Ø3 x 10 mm | x 24 |
| D | Ø4 x 30 mm | x 27 |
| E | 2.5 x 10 mm | x 16 |
| F | Ø6 x 25 mm | x 4 |
| G | Ø4 x 12 mm | x 1 |
| H | Ø6 x 30 mm | x 14 |
| I | Ø4 x 12 mm | x 3 |
| J | Ø3 x 12 mm | x 3 |
| K | Ø6 x 25 mm | x 3 |
| L | Ø6 x 30 mm | x 3 |
| M | Ø4 x 40 mm | x 1 |
| N | Part N | x 1 |
| O | Part O | x 1 |
| P | Part P | x 1 |
Main Components
The chest comprises several main components: A top panel ([part 1]), a bottom panel ([part 2]), two side panels ([part 3], [part 4]), two back panels ([part 5], [part 6]), drawer slide rails ([part 7]), drawer components including front ([part 8]), bottom ([part 9]), sides ([part 10], [part 11]), back ([part 12]), and support ([part 13]). It also includes metal tubes ([part 14]), base supports ([part 15]), and connector tubes ([part 16]). Note: Some components, like drawer parts, are included in quantities of [x3].
Assembly Steps
Step 1: Attach Slide Rails
Fix slide rail (K) and (L) to board 4 and 3 respectively using screw (C). Insert quickfit screw (A) into corresponding holes in board 3 and 4 with a screwdriver. Please pay attention to the holes where the accessories are inserted. [screwdriver] [!]
Step 2: Assemble Frame Sides
Attach board 7 to board 4 with wooden dowel (H) and turn cam lock (B) clockwise to tighten. Attach board 3 to board 7 with wooden dowel (H) and turn cam lock (B) clockwise to tighten. [screwdriver] [!]
Step 3: Attach Top Panel
Fix part (N) to board 1 with screw (G). Insert quickfit screw (A) into corresponding holes in board 1 with a screwdriver. Cover board 1 to the top with wooden dowel (H) and turn cam lock (B) clockwise to tighten. [screwdriver] [!]
Step 4: Attach Bottom Panel
Attach board 2 to the bottom of the unit with wooden dowel (H) and fix with screw (D). [screwdriver]
Step 5: Assemble Base
Connect part 15 with steel tube 14 using screw (F). Attach the base to board 14 with screw (D). [screwdriver]
Step 6: Attach Back Panels
Fix back board 5 and 6 with screw (E). Please note board 5 and 6 are connected with tube 16. [screwdriver]
Step 7: Install Anti-Tipping Device
Install anti-tipping device as you like. Attach the device to the wall and the furniture using parts M, N, and O. [wall] [!]
Step 8: Assemble Drawer Boxes
Insert quickfit screw (A) into corresponding holes in board 8. Attach boards 11, 12, 13 to board 8 and turn cam lock (B) clockwise to tighten. Slide board 9 into available slots. Fix board 10 to the component with screw (D). Repeat for [x3] drawers. [screwdriver] [!]
Step 9: Attach Drawer Runners
Please pay attention to the holes where the accessories are inserted. Fix runner (J) and (I) to board 11 and 12 respectively with screw (C). Repeat for [x3] drawers. [screwdriver]
Step 10: Insert Drawers
Align rails, slide all drawers into the chest. [drawer-slide]
Warranty Information
Warranty Claims
There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty starts from the date of purchase, which must be verified by proof of purchase.
Before making a claim, please call FUFU&GAGA. Leave your purchase order number and details of the problem. A replacement part will be arranged within 48 hours. If out of stock, a shipping date will be provided.
The product must be used according to the instructions provided. For health reasons.
If the furniture needs to be returned for other reasons, it must be cleaned, dried, and returned within 30 days of receipt.
Type of Warranty Claim
Failure to follow furniture instructions will invalidate the warranty. Damage during installation is not covered, but damage during transportation is.
Scope of Responsibility
FUFU&GAGA shall not bear responsibility for misuse, user damage, or loss of parts during installation. Damage and scratches after use are not covered by the warranty.
Warranty Coverage Areas
Sheet parts: 1 month from the date of purchase.
Electrical parts: 1 month from the date of purchase.
Returns and Support
Changed Your Mind?
If you have purchased and simply changed your mind, follow the retailer's instructions for returns.
Defective Items
If your item is defective, please call FUFU&GAGA for assistance. Save all packaging material and paperwork.
Damaged Items
If you receive an order with obvious shipping damage, refuse the delivery. If damage is found after acceptance, follow the retailer's specific instructions. In all circumstances, save all packaging material and paperwork. Disposing of packaging or attempting returns without contacting the fulfiller may jeopardize your claim and credit.
