Cabinet

Important Information & Warnings

IMPORTANT INFORMATION! Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

AVOID SCRATCHES! To avoid scratching, this furniture should be assembled on a soft layer, such as a rug.

IMPROVE EFFICIENCY! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

ANTI-TOPPLE WARNING!

Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

IMPORTANT! It is important that any product assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the lifespan of the product.

For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.

Tools and Hardware

Please prepare the following tools:

Tools typically include a screwdriver and potentially a drill.

Hardware List:

• A x 7 (M6 x 33.5 mm)
• B x 7 (Ø15 x 10 mm)
• C x 29+1 (M5 x 45 mm)
• D x 14+1 (M3 x 12 mm)
• E x 4 (M6 x 30 mm)
• F x 18+1 (M4 x 16 mm)
• G x 2
• H x 4
• I x 8 (Ø5 x 25 mm)
• J x 10
• K x 2
• L x 2 (M4 x 12 mm)
• M x 1
• N x 2
• O x 2 (M6 x 30 mm)
• P x 2 (M4 x 10 mm)
• Q x 7 (M4 x 30 mm)
• CL x 1
• CR x 1
• DL x 1
• DR x 1

Parts List

Identify all parts before assembly:

• 1: 1 PC
• 2: 1 PC
• 3: 1 PC
• 4: 1 PC
• 5: 2 PCS
• 6: 2 PCS
• 7: 1 PC
• 8: 1 PC
• 9: 1 PC
• 10: 1 PC
• 11: 1 PC
• 12: 1 PC
• 13: 1 PC
• 14: 1 PC
• 15: 1 PC
• 16: 1 PC
• 17: 1 PC
• 18: 1 PC
• 19: 2 PCS
• 20: 1 PC

Assembly Steps

Step 1: Attach Hooks

Description: Fix 2 hooks (G) with 4 screws (D) to corresponding holes in panel #3 using a screwdriver.

Visual: Shows panel #3 and hooks (G), with screws (D) being inserted using a screwdriver. A close-up illustrates the screw insertion and hook attachment.

Step 2: Connect Panels

Description: Using 4 screws (C) to connect panel #3 with panel #2.

Visual: Shows panels #2 and #3 being joined. Screws (C) are inserted through panel #3 into panel #2.

Step 3: Connect Panels

Description: Using 4 screws (C) to connect panel #3 with panel #5.

Visual: Shows panels #3 and #5 being joined. Screws (C) are inserted through panel #3 into panel #5.

Step 4: Insert Cam Bolts

Description: Insert 2 cam bolts (A) to panel #7.

Visual: Shows panel #7 with cam bolts (A) being screwed into pre-drilled holes. Warning icons indicate correct insertion and potential issues.

Step 5: Connect Panels

Description: Using 4 screws (C) to connect panel #7 to panel #2 and panel #3.

Visual: Shows panels #2, #3, and #7 being assembled. Screws (C) are used to join these panels.

Step 6: Attach Slide

Description: Using 3 screws (D) to lock the slide (CR) to panel #4.

Visual: Shows panel #4 with a slide (CR) being attached. Screws (D) are used to secure the slide. A close-up shows the screw insertion.

Step 7: Connect Panels

Description: Using 6 screws (C) to connect panel #4 to panel #5 and panel #7.

Visual: Shows panels #4, #5, and #7 being joined together using screws (C). A close-up shows screw insertion.

Step 8: Attach Slide

Description: Using 3 screws (D) to lock the slide (CL) to panel #4.

Visual: Shows panel #4 with slide (CL) being attached. Screws (D) are used to secure the slide. A close-up shows the screw insertion.

Step 9: Connect Panels and Insert Cam Locks

Description: Connect panel #8 to panel #7, insert cam lock (B) into panel #8 and turn clockwise to tighten.

Visual: Shows panels #7 and #8 being joined. Cam locks (B) are inserted into panel #8 and turned 180 degrees to tighten.

Step 10: Slide Back Panel

Description: Slide back panel #12 into available slots.

Visual: Shows the partially assembled cabinet structure with panel #12 being slid into designated slots at the back.

Step 11: Connect Panels

Description: Using 4 screws (C) to connect panel #9 with panel #8 and panel #4.

Visual: Shows panels #4, #8, and #9 being assembled. Screws (C) are used for connection. Close-ups show screw insertion.

Step 12: Attach Metal Base

Description: Using 4 screws (E) to connect 2 metal bases (#19) to panel #9.

Visual: Shows panel #9 with metal bases (#19) being attached using screws (E). A close-up shows the connection detail.

Step 13: Connect Panels

Description: Using 6 screws (C) to connect panel #1 with panel #2, panel #3, and panel #4.

Visual: Shows the main cabinet structure being formed by joining panels #1, #2, #3, and #4 using screws (C). A close-up shows screw insertion.

Step 14: Attach Hinges and Handle

Description: Use 6 screws (F) to lock the hinge (H) to the door panel #10. Use 2 screws (L) to lock the handle (K) to the door panel #10. Use 12 screws (F) to lock panel #10 through the hinge to the right side panel.

Visual: Shows door panel #10, hinges (H), and handle (K). Screws (F) and (L) are used for attachment. Multiple close-ups illustrate the process.

Step 15: Adjust Door Alignment

Description: Adjust hinge screws to make door alignment.

Visual: Diagrams show adjustments to the hinge screws to align the cabinet door properly.

Step 16: Insert Shelf Pins and Shelves

Description: Insert the shelf pins (I) into the panel as shown, then place panel #6 on the shelf pins.

Visual: Shows shelf pins (I) being inserted into the cabinet's side panels, followed by placing shelves (#6) onto the pins.

Step 17: Assemble Drawer Box

Description: Use 4 screws to connect panel #14, panel #15 to panel #16. Use 1 screw to connect panel #17 with panel #16. Slide bottom panel #18 into available slots. Insert 5 cam bolts (A) to panel #13, lock the handle (K) with 2 screws (L).

Visual: Shows the assembly of the drawer box components (#13, #14, #15, #16, #17, #18) using screws and cam bolts. A close-up shows handle (K) attachment to panel #13 with screws (L).

Step 18: Connect Drawer Components

Description: Connect panel #14, #15, #17 to panel #13, insert 5 cam locks (B) and turn clockwise to tighten. Use 2 screws (D) to lock the DR to panel #15. Use 2 screws (D) to lock the DL to panel #14.

Visual: Shows the drawer box assembly. Cam locks (B) secure the panels. Screws (D) are used to attach drawer slides (DR, DL).

Step 19: Place Drawer and Cushion

Description: Put the drawer into the cabinet. Put down seat cushion #20 to panel #7 with sticker.

Visual: Shows the completed drawer being inserted into the cabinet and the seat cushion (#20) being placed on panel #7.

Step 20: Install Anti-Tipping Device

Description: Using screw (O) to lock the metal part (P) to the top panel #1. Drill holes on wall, knock part (N) into the holes. Install anti-tipping device as shown. Cover the hole with sticker J.

Visual: Illustrates the installation of the anti-tipping hardware. This includes drilling into the wall, securing part (N), attaching part (P) to the cabinet top, and using screws (Q) and (J). Steps are numbered 1-4.

Warranty

WARRANTY CLAIMS

• There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase, which must be verified by proof of purchase.
• Before making a claim, please call to inquire. Provide your purchase order number and details of the problem for a replacement part. Response within 48 hours. If out of stock, a shipping date will be provided.
• The product must be used in accordance with the instructions provided.
• For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

• Failure to follow the furniture instructions will invalidate the warranty.
• Does not include damage during installation, but includes damage during transportation.

Scope of Responsibility

• No responsibility will be borne for misuse, user damage, or loss of parts during installation.
• Damage and scratches after use are not covered by the warranty.

The Warranty Relates to All Bought in The US and Covers The Following Areas:

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

RETURNS

CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?

PLEASE FOLLOW THE BELOW INSTRUCTIONS:

• If you have purchased and simply changed your mind, follow the retailer's instructions for returns.

DEFECTIVE ITEMS

• If your item is defective in any way, i.e., it doesn't work but you can't identify why, please call in the first instance.

DAMAGED ITEMS

• If you receive an order with obvious shipping damage from the retailer, refuse the delivery. If the delivery has been accepted and shipping damage is found, please follow the specific instructions advised by the retailer.
• In all circumstances, please save all packaging material and paperwork for the order.
• Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardize your chances of making a claim, and you may not receive a credit for the return.