Resistex Miks Lighting Fixture
Installation Instructions and Product Information
Product Overview
This document provides installation instructions for the Resistex Miks lighting fixture. It includes safety guidelines, maintenance advice, and step-by-step mounting procedures.
The fixture offers adjustable orientation and low luminance options.
Company Information:
RESISTEX EXPLOITATION
11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France
Tel: +33 4 93 276 276
Fax: +33 4 93 276 280
Email: contact@resistex-sa.com
APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 € - VAT FR 73 487 593 477
Installation Instructions
Safety Notes
- Never work when voltage is present on the luminaire.
- The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
- Risk of electrostatic discharges (ESD Norm). Handle with precautions.
- Please observe the notes and steps described in the mounting instructions.
Maintenance Instructions
- Do not use chemicals or abrasive products to clean the fixture.
- Keep these instructions for dismantling or future maintenance. Additional information about RESISTEX luminaires can be consulted on the website www.resistex-sa.com.
- RESISTEX cannot be responsible for any misuse of the product.
Mounting/Installation Steps
- Prepare the mounting surface: Cut a circular hole with a diameter of 69 mm (±1 mm) using the provided template.
- Insert the fixture: Push the lighting fixture upwards into the pre-cut hole in the ceiling or mounting surface.
- Secure the fixture: Rotate the fixture clockwise to lock it into place.
- Open the wire connector: Lift the lever or clip on the wire connector to open it.
- Insert wires into connector: Insert the electrical wires (Live, Neutral, and Earth) into the appropriate terminals within the opened connector.
- Close the connector: Ensure wires are securely inserted and close the connector. The terminals are typically labeled L (Live), N (Neutral), and Earth.
- Final placement and adjustment: The fixture is now installed. Arrows indicate that the fixture can be rotated for aiming and adjustment.
- Verify connection: A diagram shows correct (checkmark) and incorrect (cross) wire connections, likely referring to polarity or proper seating in the connector.
- Installed view: The final image shows the Resistex Miks fixture seamlessly installed in a ceiling.
Certifications and Product Details
The product meets various standards and certifications:
- IP65: Protection against dust and water jets.
- IK07: Protection against mechanical impacts.
- 5 Year Warranty: Indicates a manufacturer's warranty period.
- CE Marking: Conformity to European health, safety, and environmental protection standards.
- ROHS Compliant: Restriction of Hazardous Substances.
- Classe II: Double or reinforced insulation for electrical safety.
Model/Version: V1.1 - 09.22
Website: www.resistex-sa.com