Resistex Miks

Safety Notes

• Never work on the luminaire when it is powered on. [⚡]
• Installation must be performed by a professional installer in compliance with electrical installation standards and regulations.
• Risk of electrostatic discharges (ESD Norm). Handle with necessary precautions. [?️]
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires can be found on the website: www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Installation Steps

Step 1: Prepare the Opening

Determine the required cutout dimensions.Cutout diameter: Ø69 mm (±1 mm). Panel cutout: Ø69 mm (±1 mm).

Step 2: Insert the Fixture

Insert the Resistex Miks fixture into the prepared opening in the ceiling or surface.Fixture being inserted into the cutout. [➡️]

Step 3: Orient the Fixture (Optional)

If the fixture is adjustable, rotate it to the desired orientation.Fixture being rotated for adjustment. [?]

Step 4: Prepare for Wiring

Open the electrical connector housing to access the terminals.Connector housing opened. [?]

Step 5: Connect the Wires

Insert the electrical supply wires into the appropriate terminals within the connector. Ensure correct polarity.Wires inserted into connector terminals. [?]

Step 6: Wiring Diagram

Connect the Live (L), Neutral (N), and Earth (if applicable) wires to the corresponding terminals in the connector block.Connector terminals labeled L (Live), N (Neutral), and a third terminal (likely Earth).

Step 7: Secure the Fixture

Engage the fixture's spring clips to secure it firmly in place within the opening.Spring clips engaging to hold the fixture. [?]

Step 8: Final Check

Perform a final check of all electrical connections and ensure the fixture is securely mounted.Visual representation of a secure connection and mounted fixture. [✔️]

Step 9: Installed Fixture

The Resistex Miks fixture is now installed and ready for use.The installed fixture flush with the ceiling.