Resistex Miks Installation Guide

Options and Accessories

Adjustable: The fixture is designed to be orientable, allowing for directional lighting adjustments.

Low Luminance / Low Light: This version features a specific design for low luminance or diffused light output.

Installation Instructions

Safety Notes

Never work on the fixture when it is live.

Installation must be performed by a professional installer in compliance with electrical installation standards and regulations.

Risk of electrostatic discharge (ESD Norm). Handle with necessary precautions.

Please observe the instructions and mounting steps.

Maintenance Instructions

Do not use chemical or abrasive products to clean the fixture.

Keep these instructions for dismantling or future maintenance. Additional information about RESISTEX luminaires is available on the website www.resistex-sa.com.

RESISTEX cannot be held responsible for any misuse of the product.

Mounting / Installation Steps

1. Step 1: Prepare the Opening

   Cut a circular opening in the ceiling with a diameter of Ø69 mm (tolerance +/- 1 mm).

2. Step 2: Insert Fixture

   Insert the fixture into the prepared opening from below, pushing it upwards [arrow pointing up].

3. Step 3: Secure Fixture

   Rotate the fixture clockwise [circular arrow] to secure it in place within the ceiling.

4. Step 4: Prepare Wiring Connection

   Open the terminal block connector to prepare for wire insertion.

5. Step 5: Open Connector

   Open the terminal block connector by lifting the lever [lever icon].

6. Step 6: Insert Wires

   Insert the live (L) and neutral (N) wires into their respective terminals within the connector.

7. Step 7: Complete Connection

   The terminal block shows L (Live), N (Neutral), and Earth (ground) terminals. Ensure wires are correctly inserted and close the connector by pushing the lever down [lever icon].

8. Step 8: Fixture Installed

   The fixture is now installed and secured in the ceiling.

9. Step 9: Verify Connection

   Verify the electrical connection. A green checkmark [✔️] indicates a proper connection, while a red cross [❌] indicates an incorrect connection or polarity.

10. Step 10: Final Installation View

    Final view of the installed Miks fixture in the ceiling.