Miks Lighting Fixture

Options / Accessories

This section illustrates features and accessories for the Miks fixture.

Orientable / Adjustable

1. Step 1: Shows the fixture with a separate mounting ring.
2. Step 2: Depicts the mounting ring being attached to the fixture.
3. Step 3: Illustrates the fixture with the ring attached, ready for installation.

Basse Luminance / Low Light

This refers to the fixture's low light output characteristic.

Installation Instructions

Detailed steps for mounting the Miks fixture:

1. Step 1: Prepare a ceiling cutout with a diameter of Ø69 mm (+/-1 mm).
2. Step 2: Insert the fixture upwards into the prepared ceiling cutout.
3. Step 3: Rotate the fixture to lock it securely in place.
4. Step 4: Wiring connection point shown with terminals for Live (L), Neutral (N), and Earth (E).
5. Step 5: Open the wiring connector.
6. Step 6: Insert the electrical wires into the L and N terminals of the connector.
7. Step 7: Close the wiring connector securely.
8. Step 8: The fixture is shown fully installed and secured within the ceiling.
9. Step 9: Adjust the fixture's orientation. A diagram shows acceptable angle ranges (marked with ✔️) and unacceptable ranges (marked with ❌).
10. Step 10: The final installed Miks fixture is visible in the ceiling.

Safety Notes

• Never work on the fixture when it is live.
• Installation must be performed by a professional installer in compliance with relevant electrical standards and regulations.
• Risk of electrostatic discharges (ESD Norm). Handle with necessary precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemical or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires is available on the website www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Technical Specifications & Certifications

Model: Miks

Ingress Protection: IP65

Impact Protection: IK07

Electrical Class: Class II [Class II]

Certifications: ROHS, CE

Warranty: 5 Year Warranty [5 Year Warranty]

Document Version: V1.1 - 09.22