Assembly Instructions

1. Insert quickfit screw (A) into the corresponding holes in plate 14 and plate 15 using a screwdriver.

   Fix two plate 16 to plate 15 using screw (F).

   Attach plate 12 and plate 13 to plate 14 and plate 15 using wooden dowel (H). Insert cam lock (B) into the holes in plate 12 and plate 13 and turn clockwise to tighten.

2. Cover plate 11 to the component using wooden dowel (H), then fix using screw (E).

   Insert quickfit screw (A) into plate 8 and plate 9 first.

   Fix plate 8 and plate 9 to two plate 7 using screw (E).

   Attach the two assembled parts to plate 12 and plate 13 using wooden dowel (H). Insert cam lock (B) into the holes in plate 12 and plate 13 and turn clockwise to tighten.

3. Insert quickfit screw (A) into plate 11 and two plate 17 first.

   Connect plate 17 with plate 18. Insert cam lock (B) into the holes in plate 18 and turn clockwise to tighten.

   Attach the part to plate 11 using wooden dowel (H). Insert cam lock (B) into the holes in plate 17 and plate 18 and turn clockwise to tighten.

4. Fix two plate 16 to plate 10 using screw (F).

   Fix hinge (J) to plate 10 using screw (C).

   Fix part (D) to plate 16 using screw (G).

   Attach plate 10 to plate 15 by fixing the hinge using screw (C).

5. Connect plate 2 and plate 4 with plate 3 using wooden dowel (H).

   Fix plate 1 to plate 2, plate 3, and plate 4 using screw (E).

   Fix hook (L) to plate 2 and plate 3 using screw (N).

   Attach the component to plate 15 using wooden dowel (H).

6. Fix part (K) to plate 2, plate 3, and plate 4 using screw (C).

   Fix plate 2 and plate 4 with two plate 7 using screw (E).

7. Fix two plate 5 to plate 4, plate 15, and plate 2 using screw (E).

   Fix plate 6 to plate 4, plate 3, plate 2, and plate 15 using screw (F).

8. Install the anti-tipping device (M) as shown.