Hall Tree Assembly Instructions

Model: LJY-KF020347-01

Version: 02/15/2023

Important Information & Safety Warnings

IMPORTANT INFORMATION! Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

AVOID SCRATCHES! To avoid scratching, this furniture should be assembled on a soft layer, such as a rug.

IMPROVE EFFICIENCY! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

ANTI-TOPPLE WARNING! Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

IMPORTANT! It is important that any product assembled using screws is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the product's lifespan.

For regular maintenance and cleaning: For the frame, use a rag dipped in neutral detergent, wipe thoroughly, and then dry with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use excessive force when installing, as the board is easy to break.

Tools Required and Parts Identification

Tools to Prepare: ?️ (e.g., tape measure, screwdrivers, hammer - specific tools shown in diagram)

Parts Identification: When installing, please carefully confirm whether each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

Type	Dimensions	Description	Quantity
A	Ø6x35mm	Quickfit Screw	36
B	Ø15x9.5mm	Cam Lock	40
C	Ø6x30mm	Wooden Dowel	44
D	Ø4x20mm	Screw	4
E	Ø4x40mm	Screw	19
F	Ø4x40mm	Screw	38
G	N/A	Hinge	4
H	N/A	Hinge	2
I	N/A	Handle	3
J	Ø4x12mm	Part J	4
K	Ø6x50mm	Screw	4
L	Ø6x10mm	Nut	4
M	N/A	Hook	4
N	N/A	Part N	2
O	Ø4x12mm	Screw	4
P	N/A	Anti-Tipping Device Part	2

Main Components (Numbered in Diagrams):

1: Top Panel
2: Side Panel (Left)
3: Side Panel (Right)
4: Back Panel (Upper)
5: Side Panel (Left, Lower)
6: Side Panel (Right, Lower)
7: Back Panel (Lower)
8: Shelf Panel
9: Base Panel (Left)
10: Base Panel (Right)
11: Drawer Front (Left)
12: Drawer Front (Right)
13: Shelf (Drawer)
14: Bottom Panel
15: Back Panel (Middle)
16: Drawer Side (Left)
17: Drawer Side (Right)
18: Drawer Back
19: Drawer Bottom
20: Door (Left)
21: Door (Right)
22: Back Panel (Upper Left)
23: Back Panel (Upper Right)
24: Back Panel (Middle Left)

WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover: ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand, climb or hang on drawers, doors, or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label. Do not remove!

Assembly Steps

Step 1: Assemble Side Panels

1. Insert quickfit screw (A) into corresponding holes in plates 4, 5, and 6 with a screwdriver. ?

2. Insert wooden dowel (C) into plate 4. Attach plates 5 and 6 to plate 4. Insert cam lock (B) into holes in plates 5 and 6 and turn clockwise to tighten. ⚙️

Step 3: Attach Side Panel to Back Panel

3. Insert wooden dowel (C) into plate 3. Attach plate 2 to plate 3 and fix with screw (E). ?

Step 4: Connect Side Panels

4. Insert wooden dowel (C) into plates 2 and 3. Attach plates 5 and 6 to plates 2 and 3. Insert cam lock (B) into holes in plates 2 and 3 and turn clockwise to tighten. ⚙️

Step 5: Install Back Panel

5. Slide plate 22 along grooves as shown. ➡️

Step 6: Attach Main Frame

6. Insert wooden dowel (C) into plate 1. Cover plate 1 to plates 5 and 6, and fix with screw (E). ?

Step 7: Add Support Structure

7. Insert nut (L) into plate 2. Insert quickfit screw (A) into nuts. Attach plate 7 to plate 2. Insert cam lock (B) into holes in plate 7 and turn clockwise to tighten. ⚙️

Step 8: Install Back Panels

8. Slide plate 23 along grooves as shown. ➡️

Step 9: Attach Shelf Support

9. Insert quickfit screw (A) into corresponding holes in plate 8 with a screwdriver. Flip the plate and insert quickfit screw (A) again. ?

Step 10: Connect Shelf to Frame

10. Insert wooden dowel (C) into plate 8. Attach plate 8 to plates 5, 7, and 6. Insert cam lock (B) into holes in plate 7 and turn clockwise to tighten. Fix plate 8 with screw (E). ⚙️?

Step 11: Assemble Drawer Components

11. Insert quickfit screw (A) into corresponding holes in plates 9, 10, 14, and 15 with a screwdriver. ?

Step 12: Assemble Drawer Box

12. Fix plate 18 to plate 19 with screw (E). Attach the assembly to plate 14. Insert cam lock (B) into holes in plates 18 and 19 and turn clockwise to tighten. ⚙️?

Step 13: Attach Drawer Slides

13. Insert wooden dowel (C) into plate 14. Attach plates 11 and 12 to plate 14 and fix with screw (E). ??

Step 14: Connect Drawer Base

14. Insert wooden dowel (C) into plate 14. Attach plates 9 and 10 to plate 14. Insert cam lock (B) into holes in plate 14 and turn clockwise to tighten. ?⚙️

Step 15: Assemble Drawer Sides

15. Insert wooden dowel (C) into plate 15. Attach plates 16 and 17 to plate 15. Insert cam lock (B) into holes in plates 16 and 17 and turn clockwise to tighten. ?⚙️

Step 16: Attach Drawer to Base and Doors

16. Insert wooden dowel (C) into plate 15. Attach plate 15 to plate 14. Insert cam lock (B) into holes in plate 14 and turn clockwise to tighten. Fix plates 16 and 17 to plates 9 and 10 with screw (D). ?⚙️?

Step 17: Install Back Panels

17. Slide plate 24 along grooves. Insert wooden dowel (C) into plates 9, 10, 11, and 12. ➡️?

Step 18: Connect Main Sections

18. Connect the two components. Insert cam lock (B) into holes in plates 9, 10, 11, 12 and turn clockwise to tighten. ?⚙️

Step 19: Install Shelves and Drawer Parts

19. Fix part (N) to plate 1 with screw (O). Insert part (J) into plates 11 and 12, then place shelf 13. ?➡️

Step 20 & 21: Attach Doors and Hinges

20. Fix hinge (G) to plates 20 and 21 with screw (F). ?

21. Fix hinge (H) to another plate 21 with screw (F). Attach plate 20 to plate 9 by fixing hinge (G) with screw (F). Attach plate 21 to plate 12 by fixing hinge (H) with screw (F). Attach plate 21 to plate 10 by fixing hinge (G) with screw (F). ?

Step 22: Adjust Doors

Follow the diagrams for hinge adjustment: rotation, vertical movement, and depth adjustment. ⚙️

Step 23: Attach Handles and Hooks

23. Fix hook (M) to plate 2 with screw (F). Fix handle (I) to door plate with screw (F). ?

Step 24: Install Anti-Tipping Device

24. Install the anti-tipping device as shown. ⚠️

Warranty Information

Warranty Claims

There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty starts from the date of purchase, which must be verified by proof of purchase.
Before making a claim, contact FUFU&GAGA for assistance. Provide your purchase order number and details of the problem. Replacement parts will be arranged within 48 hours. If out of stock, a shipping date will be provided.
The product must be used according to the provided instructions for health reasons.
For other reasons, if the furniture needs to be returned, it must be cleaned and dried and returned within 30 days of receipt.

Type of Warranty Claim

Failure to follow the furniture instructions will invalidate the warranty.
Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility

FUFU&GAGA shall not bear responsibility for misuse or user damage and/or loss of parts during installation.
Damage and scratches after use are not covered by the warranty.

Warranty Coverage Areas (US)

Sheet parts: 1 month from the date of purchase.
Electrical parts: 1 month from the date of purchase.

Returns Policy

Changed Your Mind?

If you have purchased and simply changed your mind, follow the retailer's instructions for returns.

Defective Items

If your item is defective in any way, and you cannot identify why, please call FUFU&GAGA first.

Damaged Items

If you receive an order with obvious shipping damage, refuse the delivery. If delivery is accepted and shipping damage is found later, follow the specific instructions advised by the retailer.

In all circumstances, please save all packaging material and paperwork for the order. Disposing of packaging material or attempting to return merchandise without contacting the fulfillment center may jeopardize your chances of making a claim and receiving a credit.

	FUFU&GAGA LJY-KF020339-01 Hall Tree Assembly Instructions Step-by-step assembly guide for the FUFU&GAGA LJY-KF020339-01 Hall Tree, a modern 4-hook unit with mirror and storage. Includes detailed instructions for attaching plates, screws, dowels, cam locks, and anti-tipping devices.
	FUFU&GAGA Hall Tree Assembly Instructions Comprehensive assembly guide for the FUFU&GAGA Hall Tree, featuring detailed steps, hardware lists, parts identification, safety warnings, and warranty information for building your cabinet.
	FUFU&GAGA Hall Tree Installation Manual Comprehensive installation guide for the FUFU&GAGA 63'' Wide Hall Tree with Bench and Shoe Storage. This manual provides step-by-step instructions and safety warnings for assembling the product.
	FUFU&GAGA Sideboard Assembly Instructions, Warranty, and Returns Detailed assembly guide for the FUFU&GAGA Sideboard, including a parts list, step-by-step instructions, safety warnings, anti-tipping device installation, hinge adjustment, warranty information, and returns policy.
	FUFU&GAGA Hall Tree Assembly Instructions - Product Manual Official assembly instructions for the FUFU&GAGA Hall Tree, Coat Rack, or Armoire. This guide provides a detailed hardware list and step-by-step assembly process for the furniture piece featuring bench seating and storage cubbies.
	FUFU&GAGA Sideboard Assembly Instructions and Warranty Comprehensive assembly guide, parts list, safety warnings, and warranty information for the FUFU&GAGA Sideboard (Model LJY-KF020328-01).
	FUFU&GAGA Sideboard Assembly Instructions and Manual Step-by-step assembly guide for the FUFU&GAGA Sideboard (Model KF260080-01). This manual provides detailed instructions, a parts list, safety warnings, maintenance tips, warranty, and returns information for assembling your new furniture.
	FUFU&GAGA Changing Table Assembly Instructions Comprehensive assembly guide for the FUFU&GAGA Changing Table, detailing all steps, parts, hardware, safety warnings, warranty, and return policies.