Resistex Miks LED Downlight

Product Overview

This document provides installation, safety, and maintenance instructions for the Resistex Miks LED downlight.

Model: Miks

Version: V1.1 - 09.22

Installation Instructions

Follow these steps for proper installation:

1. Step 1: Prepare Ceiling Opening

   Cut a circular opening in the ceiling with a diameter of 69mm (+/- 1mm). Ensure the cut-out is precise.

   Diagram Description: Shows a template for cutting a circle of Ø69mm and the resulting hole in a ceiling panel.

2. Step 2: Insert Fixture

   Place the LED downlight fixture into the prepared ceiling opening.

   Diagram Description: Shows the downlight fixture being pushed upwards into the ceiling hole.

3. Step 3: Secure Fixture

   Rotate the fixture to engage the mounting clips and secure it in place. The diagram shows a rotational movement to lock the fixture.

   Diagram Description: Illustrates rotating the fixture to lock it into the ceiling.

4. Step 4: Prepare Wiring

   Open the electrical connector housing. The diagram shows a lever mechanism to open the connector.

   Diagram Description: Shows the connector being opened, ready for wire insertion.

5. Step 5: Connect Wires

   Insert the electrical wires (Live, Neutral, Ground) into the appropriate terminals within the connector. Ensure secure connections.

   Diagram Description: Shows wires being inserted into a push-in connector block, with labels L, N, and Ground (symbolized by earth icon).

6. Step 6: Close Connector

   Close the electrical connector housing to secure the wire connections.

   Diagram Description: Shows the connector being closed after wires are inserted.

7. Step 7: Final Check

   Verify all connections are secure and the fixture is properly seated in the ceiling.

   Diagram Description: Shows a checkmark indicating correct installation and a cross indicating incorrect installation, likely related to wiring or seating.

8. Step 8: Final Installation

   The fixture is now installed in the ceiling.

   Diagram Description: Shows the completed installation of the downlight in a ceiling.

Options / Accessories

• Adjustable Orientation

  Instructions for adjusting the orientation of the light. The diagrams show how to orient the fixture.

  Diagram Description: Shows three steps illustrating how to adjust the angle or orientation of the downlight.

• Low Luminance / Low Light

  Instructions related to low luminance or low light settings, possibly for different modes or versions of the fixture.

  Diagram Description: Shows three steps related to the low luminance feature, possibly involving different components or settings.

Safety Notes

• Never work on the luminaire when it is live (under voltage).
• Installation must be performed by a professional installer in compliance with relevant electrical standards and regulations.
• Be aware of the risk of electrostatic discharges (ESD Norm). Handle with necessary precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires is available on the website www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Company Information

RESISTEX EXPLOITATION

11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Tel: 04 93 276 276

Fax: 04 93 276 280

Email: contact@resistex-sa.com

Website: www.resistex-sa.com

APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 € - T.V.A. F.R. 73 487 593 477

Certifications and Ratings

The fixture complies with various standards and regulations:

• IP65: Dust and water protection.
• IK07: Impact resistance.
• Class II: Electrical safety classification.
• CE: European Conformity.
• ROHS: Restriction of Hazardous Substances.
• IRC: Warranty period (likely 5 years, indicated by '5').