Resistex Miks LED Luminaire
Installation Guide
Safety Notes
⚠️ Never work when voltage is present on the luminaire.
The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
⚠️ Risk of electrostatic discharges. (ESD Norm). Handle with precautions.
Please observe the notes and steps described in the mounting instructions.
Maintenance Instructions
Do not use chemicals or abrasives products to clean the fixture.
Keep these instructions for dismantling or future maintenance. You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.
RESISTEX cannot be responsible for any misuse of the product.
Installation Steps
Step 1: Preparation
Cut a circular hole in the mounting surface with a diameter of Ø69 (+/-1mm).
Step 2: Insert Fixture
Insert the luminaire into the prepared hole.
Step 3: Secure Fixture
Rotate the luminaire to engage its securing mechanism.
Step 4: Wire Connection Preparation
Open the wire connector housing.
Step 5: Connect Wires
Connect the power supply wires (Live 'L', Neutral 'N', and Earth) to the corresponding terminals within the connector. Ensure correct polarity.
Step 6: Close Connector
Close the wire connector housing securely.
Step 7: Final Mounting
Ensure the luminaire is firmly seated and secured in the ceiling.
Step 8: Testing
Verify the electrical connection and light output. [Correct connection indicator] / [Incorrect connection indicator]
Options and Accessories
- Orientable / Adjustable
- Basse Luminance / Low Light
Company Information
Resistex Exploitation
11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France
Tel: +33 4 93 276 276 | Fax: +33 4 93 276 280 | Email: contact@resistex-sa.com
APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 € - T.V.A. F.R. 73 487 593 477
Certifications: RoHS, Classe II, IP65, IK07, CE, 5-year warranty.
Luminaires Resistex - L'humain en lumière
