Resistex Miks LED Downlight

Installation Guide

General Information

• Model: Miks
• Manufacturer: Resistex
• Document Version: V1.1 - 09.22

Safety Notes

• ⚠️ Never work when voltage is present on the luminaire.
• The installation must be performed by a professional installer in compliance with electrical installation standards and regulations.
• Handle with care to prevent electrostatic discharges (ESD Norm).
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information available on www.resistex-sa.com.
• Resistex cannot be responsible for any misuse of the product.

Mounting / Installation Steps

1. Prepare the mounting hole. For both 'Orientable / Adjustable' and 'Basse Luminance / Low Light' options, the required cutout diameter is Ø69mm (+/-1mm).

   Diagram shows two types of fixtures and their respective cutout dimensions.

2. Insert the fixture body into the mounting ring or prepared opening.

   Diagram shows the fixture being pushed upwards into a mounting bracket.

3. Secure the fixture by rotating it into place.

   Diagram shows the fixture being turned clockwise to lock.

4. Connect the wiring. A close-up shows a connector with a clip mechanism for secure connection.

   Diagram shows a connector being plugged in.

5. Open the terminal block connector to prepare for wire insertion.

   Diagram shows a lever-operated terminal block being opened.

6. Insert the electrical wires into the appropriate terminals within the connector block. Ensure correct polarity.

   Diagram shows wires being inserted into the terminal block.

7. Close the terminal block connector securely. The terminals are labeled L (Live) and N (Neutral).

   Diagram shows the terminal block being closed, with L and N labels visible.

8. Compress the fixture's mounting springs and carefully insert the entire unit into the ceiling cutout.

   Diagram shows the fixture with springs compressed, ready for insertion.

9. Release the springs to secure the fixture in the ceiling. A diagram illustrates correct wire connection (✅) and incorrect connection (❌), emphasizing polarity.

   Diagram shows the fixture secured and a detail of correct/incorrect wire connections.

10. The installation is complete. The fixture is now mounted in the ceiling.

    Diagram shows the finished installation with the light fixture flush in the ceiling.

Product Specifications and Certifications

• Certifications: ROHS, Classe II, IP65, IK07, CE
• Warranty: 5 Years
• Color Rendering Index (CRI): 82
• Lumen Output: 469lm
• Finish: Black reflector