VERA DREAM BED ASSEMBLY INSTRUCTIONS
Vendor Information
| Vendor Name: | LSMX1 | Living Space Information: | Vendor Collection: VERA DREAM |
|---|---|---|---|
| Vendor Code: | V-005852 |
Parts List
| ITEM | DESCRIPTION | QUANTITY |
|---|---|---|
| 1 | VERA DREAM HEADBOARD | 1 |
| 2 | VERA DREAM RAILS/SLATS | 1 |
| 3 | VERA DREAM FOOTBOARD | 1 |
Hardware
| Identifier | Description | Quantity |
|---|---|---|
| A | 5/16-18X1" SCREW BUTTON HEAD CAP | X8 |
| B | WASHER 5/16 PLAIN | X8 |
| C | 3/16 SHORT ARM HEX KEY | X2 |
Hardware bag included behind the headboard with red ribbon.
Assembly Instructions
Step 1: Attach Side Rails to Headboard
Attach the side rails (2) to the headboard (1) using four Screws (A) and Washers (B). Use the Hex Key (C) for tightening.
Diagram Description: Shows the headboard upright, with side rails being attached using screws and washers. Hardware bag is indicated.
Step 2: Attach Footboard to Side Rails
Attach the footboard (3) to the side rails (2) using four Screws (A) and Washers (B). Use the Hex Key (C) for tightening.
Diagram Description: Shows the partially assembled bed frame, with the footboard being attached to the side rails.
Step 3: Attach Support Legs
Attach the support legs with levelers to the center slat (part of item 2). Adjust the levelers on the bottom of the support legs as necessary. Note: Turn right, only use the hand.
Diagram Description: Illustrates attaching support legs to the center slat. A note indicates 'TURN RIGHT ONLY USE THE HAND'.
Step 4: Place U-shaped Panel
Place the assembled bed frame from top to bottom into the U-shaped slot of the main bed structure.
Diagram Description: Shows the bed frame being inserted into a U-shaped slot.
Step 5: Unroll Slats
Unroll the slats onto the center slat, starting at the footboard and ending at the headboard.
Diagram Description: Depicts unrolling the bed slats across the frame.
Step 6: Verify Installation
Verify that the slats are installed properly and that the support legs are perpendicular to the floor for full support.
Diagram Description: Shows the completed bed frame with slats properly positioned and resting on the floor.
Estimated Assembly Time: 30 minutes
