Product Details
| ITEM | DESCRIPTION | QUANTITY |
|---|---|---|
| 1 | VERA DREAM WINGS | 2 |
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | BRACKET | x6 |
| B | 5/16-18X1-1/4" SCREW BUTTON HEAD CAP | x10 |
| C | WASHER 5/16 PLAIN | x10 |
| D | 3/16 SHORT ARM HEX KEY | x2 |
Hardware bag included below with red ribbon to be located.
Assembly Steps
Step 1: Attach brackets (A) facing left side to wing
Attach brackets (A) facing left side to the wing, to the end of the slot, using wrench (D), screw (B), and flat washers (C).
Diagram Description: Illustrates attaching a bracket (A) to the left side of the bed wing. A screw (B) and washer (C) are used, tightened with a hex key (D). The bracket is aligned with a slot at the end of the wing.
Step 2: Attach brackets (A) facing right side to wing
Attach brackets (A) facing right side to the wing, to the end of the slot, using wrench (D), screw (B), and flat washers (C).
Diagram Description: Illustrates attaching a bracket (A) to the right side of the bed wing. A screw (B) and washer (C) are used, tightened with a hex key (D). The bracket is aligned with a slot at the end of the wing.
Step 3: Raise bed to put inside the side rail of wing bracket
Raise the bed to position the side rail inside the wing bracket.
Diagram Description: Shows the bed frame being lifted. A side rail is being aligned to connect with the wing bracket. The assembly rests on the floor.
Step 4: Attach bracket (A) to headboard
Attach bracket (A) to the headboard, using wrench (D), 4 screws (B), and flat washers (C).
Diagram Description: Depicts attaching brackets (A) to the headboard. Four screws (B) and washers (C) are used per bracket, tightened with a hex key (D). Multiple brackets are shown being secured to the headboard.
Estimated Assembly Time: ⏱️ 30 minutes
