Tips to Prevent Milk Loss and Collect More Breast Milk
- Ensure the breast pump is assembled correctly.
- Lean forward to ensure your nipple is in the center of the flange channel. The breast pump should fit snugly against your breast.
- We recommend users wear a full-coverage nursing bra that creates a good seal between the breast and the flange.
- Lean slightly forward to remove the breast pump from the breast after pumping.
Visual Description: Diagram illustrating correct breast pump flange placement, emphasizing leaning forward and a snug fit against the breast.
Installation Guidelines
Ensure your hands are clean before installing the pump. We recommend users wear a full-coverage nursing bra that creates a good seal between the breast and the flange. Lean slightly forward to ensure your nipple is in the center of the flange channel. The breast pump should fit snugly against your breast. Lean slightly forward to remove the breast pump from the breast after pumping.
Visual Description: Depicts attaching the milk collector to the flange, showing the alignment and pressing action.
Visual Description: A QR code is shown, linking to a video tutorial for the user manual.
Important Tips
- The expected lifespan of washable parts is 1 to 3 months. It is recommended to replace washable parts if the pump has been stored for a long period, or before pumping for your next child.
- The breast pump will automatically shut off after pumping for 30 minutes.
- If irritation or discomfort occurs, use your finger to break the seal between the flange and breast tissue, discontinue use, and consult a healthcare provider.
Support
For questions, please contact us via email: support@momcozy.com
Cleaning and Sterilization
Non-washable Parts
- Tubing
- Pump Motor
Washable Parts
- Valve
- Flange
- Milk Collector
Cleaning and Sterilizing Washable Parts
- Clean with soapy water (40-60 °C) for 3-5 minutes.
- Use boiling water/steam/sterilization pot for sterilization. 100 °C (212 °F) for 5-10 minutes is required.
Visual Description: Illustrates two configurations: 'Double pumping' and 'Single pumping', showing how tubing connects for each.
Visual Description: Shows the process of connecting the tubing, with one end going to the pump motor and the other to the milk collector.
Sterilization Warning
It is not recommended to sterilize pump parts in a microwave or UV sterilizer. High temperatures (> 110 °C) shorten the lifespan and pose safety risks.
Pouring Milk
Hold the milk collector in the correct direction when pouring milk. Then pour the milk through the flange channel.
Visual Description: Demonstrates how to pour milk from the milk collector into a container, showing the correct orientation and pouring through the flange channel.
Control Panel
- 1 Suction Level Indicator Light
- 2 Mode Indicator Light
- 3 Working Time/Suction Level Display
- 4 Battery Display
- 5 Power On/Off Button
- 6 Increase Button
- 7 Decrease Button
- 8 Mode Selection Button
Operation: Press and hold the Power button (5) to turn On/Off; Short press to pause/resume the pumping session.
Modes: The pump features Stimulation, Pumping, and Mixed modes.
