Momcozy Portable Breast Pump: Usage and Care Guide
Essential information for optimal breast milk production and pump maintenance.
Preventing Milk Leakage and Tips for More Breast Milk
Follow these steps to ensure efficient and comfortable pumping:
- Ensure the pump is correctly assembled.
- Lean forward to center your nipple in the flange tunnel. The breast pump should sit snugly against your breast. [Diagram: Person leaning forward, nipple centered in flange.]
- Use a full-coverage nursing bra to create a tight seal between your breast and the flange. [Diagram: Nursing bra with flange positioned for seal.]
- Lean slightly forward to remove the pump from your breast after pumping. [Diagram: Person leaning forward, breaking seal to remove pump.]
? Tips for Better Pumping:
- The washable parts are expected to last one to three months. Replace them after long-term storage or before using for a new child.
- The breast pump automatically shuts off after 30 minutes of use.
- If you experience irritation or discomfort, gently break the seal between the flange and breast tissue with your finger, stop use, and consult a healthcare provider.
For questions, contact us via email: ? support@momcozy.com
Installation Guidelines
Please refer to the user manual for detailed instructions. Ensure your hands are clean before installation.
- Attach the milk collector and lid to form a tight seal. [Diagram: Milk collector attached to lid.]
- Gently press the valve into the milk collector, ensuring no gaps. [Diagram: Valve inserted into milk collector.]
- Align the milk collector with the flange top and press around to ensure a tight connection. [Diagram: Collector aligned and attached to flange.]
A video guide is available via QR code on the original document.
Pouring Milk
Hold the milk collector in the correct direction when pouring milk. Pour the milk out of the flange tunnel. [Diagram: Milk collector held correctly for pouring.]
For questions, contact us via email: ? support@momcozy.com
Cleaning and Sterilization
Non-washable parts: Hose, Pump motor
Washable parts: Valve, Milk collector, Flange
Cleaning and Sterilizing Washable Parts:
- Clean with soapy water (40-60°C) for 3-5 minutes.
- Sterilize using boiling water/steam/sterilizing pot at 100°C (212°F) for 5-10 minutes.
⚠️ Recommendation: Do not sterilize pump parts in a microwave or UV sterilizer. High temperatures (> 110°C) can shorten their lifespan and pose safety risks.
Control Panel
Control Panel Functions:
- 1: Suction level indicator
- 2: Mode indicator
- 3: Operation time/suction level display
- 4: Battery display
- 5: ⚙️ On/Off (Press and hold to turn on/off; Short press to pause/continue)
- 6: ➕ Increase
- 7: ➖ Decrease
- 8: Mode selection (Stimulation ⚡, Pumping ?, Mixed ?)
[Diagram: Illustration of the control panel with labeled buttons.]