Momcozy Wearable Breast Pump

How to Prevent Milk Leakage and Tips for Pumping More Breast Milk

1. Ensure the breast pump is assembled correctly.
2. Lean forward to ensure the nipple is centered in the flange tunnel. The pump should fit snugly against your breast.
3. Wear a full-coverage nursing bra to create a tight seal between the breast and the flange.
4. After pumping, lean forward slightly to remove the pump from your breast.

Tips:

• The estimated lifespan of washable parts is 1-3 months. Replace washable parts after long-term storage or before pumping for another baby.
• The pump automatically turns off 30 minutes after pumping.
• If irritation or discomfort occurs, use your finger to break the seal between the flange and breast tissue, discontinue use, and consult a doctor.

For any questions, please contact support@momcozy.com

Assembly and Usage

Installation Instructions (for more details, see user manual)

Please ensure your hands are clean before installation.

1. Attach the milk collection cup and secure the lid to ensure a seal. ✔️
2. Carefully insert the valve into the milk collection cup. Ensure there are no gaps. ✔️
3. Align the milk collection cup with the top of the flange and press firmly to create a tight seal. ✔️

Connect the long end of the tubing to the pump motor.

Pumping Modes:

• Double Pumping
• Single Pumping

Cleaning and Sterilization

Non-washable parts:

• Tubing
• Pump Motor

Washable parts:

• Valve
• Flange
• Milk collection tank

Cleaning and Sterilization of Washable Parts:

1. Clean with soapy water (40-60°C / 104-140°F) for 3-5 minutes.
2. Sterilize using boiling water/steam/sterilizer. Requires 100°C (212°F) for 5-10 minutes.

Note: It is not recommended to sterilize pump parts in a microwave or UV sterilizer. High temperatures (>110°C / 230°F) can shorten their lifespan and pose a safety risk.

Pouring Milk

1. When pouring milk, ensure the collection cup is held in the correct direction. ✔️
2. Pour the milk from the flange tunnel.

For any questions, please contact support@momcozy.com

Control Panel

• 1. Suction Level Indicator
• 2. Mode Indicator
• 3. Operation Time / Suction Level Indicator
• 4. Battery Display
• 5. On/Off Button [power]
• 6. Increase Button [+]
• 7. Decrease Button [-]
• 8. Mode Selection Button [mode]

Operation: Long press to turn on/off; Short press to pause/resume pumping.

Modes:

• Stimulation
• Expression
• Mixed