FUFU&GAGA Sideboard Assembly Instructions
Model: LJY-KF020328-01
Version Date: 11/24/2022
Important Information & Safety
❗ IMPORTANT INFORMATION: Please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.
✨ AVOID SCRATCHES: To prevent scratching, this furniture should be assembled on a soft layer, such as a rug.
? IMPROVE EFFICIENCY: Try to find a partner to assemble with you, which can speed up the installation efficiency and shorten the time.
⚠️ ANTI-TOPPLE WARNING: Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
? IMPORTANT NOTES:
- It is important that any product assembled using screws is re-tightened 2 weeks after assembly, and once every 3 months, to ensure stability throughout the product's lifespan.
- For regular maintenance and cleaning: For the frame, use a rag dipped in neutral detergent, wipe thoroughly, and then dry with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag.
- Do not use an electric screwdriver, and do not use too much force when installing, as the board is easy to break.
Tools Required
Please prepare the following tools:
- ? Tape Measure
- ? Screwdriver (Phillips head)
- ? Hammer
- ? Level
- ?️ Drill (for wall mounting)
⚠️ When installing, please carefully confirm whether each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.
Parts List
| Identifier | Quantity | Description / Dimensions |
|---|---|---|
| A | x 6 | Ø 6 x 35 mm |
| B | x 12 | Wooden Dowel |
| C | x 8 | Ø 4 x 40 mm |
| D | x 6 | Ø 15 x 9 mm |
| E | x 2 | Hinge |
| F | x 4 | Hinge |
| G | x 62 | Ø 4 x 14 mm |
| H | x 8 | Shelf Support |
| J | x 2 | Wall Anchor |
| K | x 2 | Anti-tipping Bracket |
| L | x 8 | Ø 3.5 x 14 mm |
| M | x 8 | Back Plate Reinforcement |
Component Overview
The sideboard is comprised of the following numbered components:
- 1: Top Panel
- 2: Bottom Panel
- 3: Left Side Panel
- 4: Middle Divider Panel
- 5: Right Side Panel
- 6: Upper Back Panel
- 7: Back Panel Connector
- 8: Lower Back Panel
- 9: Left Door
- 10: Middle Door
- 11: Right Door
- 12: Legs (x4)
- 13: Leg Support (x4)
- 14: Vertical Divider
- 15: Left Shelf
- 16: Right Shelf
Assembly Instructions
Step 1: Prepare Top Panel
Insert quickfit screws (A) into the corresponding holes in plate 1 (Top Panel) with a screwdriver. Fix the anti-tipping part (K) to plate 1 using screw (G) as shown.
Visual: Screws (A) inserted into top panel (1). Anti-tipping bracket (K) attached to top panel (1) with screw (G).
Step 2: Attach Side and Divider Panels
Attach plate 2 (Bottom Panel) to plates 3 (Left Side), 4 (Middle Divider), and 5 (Right Side) using wooden dowels (B). Fix securely with screws (C) as shown.
Visual: Bottom panel (2) connected to side panels (3, 5) and divider panel (4) using dowels (B) and screws (C).
Step 3: Install Legs
Fix legs (12) and leg supports (13) to plate 2 (Bottom Panel) using screws (G) as shown.
Visual: Legs (12) and leg supports (13) attached to the underside of the bottom panel (2) with screws (G).
Step 4: Install Back Panels
Connect plate 14 (Vertical Divider) and 6 (Upper Back Panel) with part 7 (Back Panel Connector) first. Slide plates 8 (Lower Back Panel), 6, and 14 along the available grooves as shown.
Visual: Vertical divider (14) and upper back panel (6) joined by connector (7). All back panels (6, 8, 14) slid into grooves.
Step 5: Secure Top Panel and Install Cam Locks
Cover plate 1 (Top Panel) to the top of the assembled component using wooden dowels (B) at first. Insert cam locks (D) into the designated holes in plates 3, 4, and 5, then turn clockwise to tighten as shown.
Visual: Top panel (1) placed on top. Cam locks (D) inserted into side panels (3, 5) and divider panel (4) and turned to lock.
Step 6: Attach Hinges to Doors
Fix hinges (F) to plates 9 (Left Door) and 11 (Right Door) respectively using screws (G) as shown. Fix hinges (E) to plate 10 (Middle Door) using screws (G) as shown.
Visual: Hinges (F) attached to doors (9, 11). Hinges (E) attached to door (10).
Step 7: Attach Doors to Cabinet
Attach door plate 9 to plate 3 (Left Side); door plate 11 to plate 5 (Right Side); door plate 10 to plate 4 (Middle Divider) by fixing hinges with screws (G) as shown.
Visual: Doors (9, 10, 11) attached to their respective cabinet panels (3, 4, 5) via hinges.
Step 8: Reinforce Back Panel
Reinforce the back panel assembly using part (M) with screws (L) as shown.
Visual: Reinforcement brackets (M) attached to the back panel with screws (L).
Step 9: Wall Mounting and Shelf Installation
Drill holes on your wall, knock part (J) (Wall Anchors) into them. Fix the unit to the wall using screw (C) as shown. Insert part (H) (Shelf Supports) into the inside of plates 3, 4, and 5. Place shelves 15 (Left Shelf) and 16 (Right Shelf) onto the supports as shown.
Visual: Wall anchors (J) in wall, unit secured with screw (C). Shelf supports (H) in place, shelves (15, 16) resting on them.
Step 10: Final Adjustments
If there is any misalignment after installation, adjust the screws on the hinges to achieve the best condition.
Visual: Close-up of hinges showing adjustment screws and arrows indicating direction of adjustment for alignment.
Warranty Information
Warranty Claims
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty starts from the date of purchase, which must be verified by proof of purchase.
- Before making a claim, please call us with your purchase order number and details of the problem. We will arrange a replacement part within 48 hours. If out of stock, we will provide a shipping date.
- The product must be used in accordance with the instructions provided.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and returned within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty.
- Does not include damage during installation, but includes damage during transportation.
Scope of Responsibility
- FUFU&GAGA shall not bear any responsibility for misuse, user damage, or loss of parts during the installation of furniture.
- After use, damage and scratches to the furniture are not covered by the warranty.
Warranty Coverage Areas (US)
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
Returns Policy
Changed Your Mind?
If you have purchased and simply changed your mind, follow the retailer's instructions for returns.
Defective Items
If your item is defective in any way, i.e., it doesn't work but you can't identify why, please call us in the first instance.
Damaged Items
If you receive an order with obvious shipping damage from the retailer, we suggest refusing the delivery. If the delivery has been accepted and shipping damage is found, please follow the specific instructions advised by the retailer.
In all circumstances, please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardize your chances of making a claim, and you may not receive a credit for the return.
