Activeshop Sillon Classic Electric Cosmetic Chair - User Manual

Product Specifications

• Model: C501A
• Maximum load capacity: 150 kg
• Dimensions: Length 185 cm, Width (seat) 56 cm, Height adjustable from 58 cm to 82 cm. Armrest dimensions: 12 cm x 49 cm. Footrest length: 0-12 cm extension.
• Operating temperature: 10°C to 40°C
• Storage temperature: -20°C to 50°C
• Relative humidity: up to 75%

Safety Precautions

• Read the manual before use.
• Do not exceed the maximum load capacity of 150 kg.
• Do not jump on the backrest or apply strong pressure to the armrests.
• Ensure the chair is placed on a stable surface.
• Do not use the chair near flammable gases.
• Always unplug the device before cleaning or maintenance.
• Do not use the chair if the power cord is damaged. Contact an authorized service center.
• Keep children and untrained persons away from the device.
• Do not attempt to disassemble or repair the device yourself. Repairs should only be performed by authorized personnel.
• Do not immerse the device in water or other liquids.
• Ensure adequate ventilation around the chair.
• Dispose of the device according to local regulations for electronic waste.

Operation

• Connect the power cord to a grounded power outlet (110V-240V).
• Use the remote control to adjust the chair's position.
• The chair features manual control functions for height adjustment (58-82 cm) and backrest (0-80°) and leg rest (0-90°) angle adjustments.
• The footrest can be extended by 0-12 cm.

Installation of Armrests

Ensure the seat is in a horizontal position. Slide the armrest into the hole on the side of the backrest until it is firmly attached. Rotate it left or right to ensure it is properly seated. Repeat for the other armrest. The armrest should be perpendicular to the floor and can be rotated 180°.

Cleaning and Disinfection

• Unplug the device before cleaning.
• Clean metal and plastic surfaces with a damp cloth. Use a small brush for hard-to-reach areas.
• Disinfect surfaces with an appropriate disinfectant.
• For stainless steel surfaces, use a mild detergent solution. Avoid chlorine-based solutions.
• For painted or chrome-plated surfaces, do not use water jets or high temperatures. Do not use solvents or acids.
• For upholstery, use a special leather cleaner and then wipe with a soft cloth.

Maintenance

• Disconnect the device from the power supply before maintenance.
• Repairs should be carried out by experienced and authorized personnel.
• Use only original spare parts approved by the manufacturer.
• Do not use the chair if it is not functioning properly.
• Check control elements and wiring weekly. Check the condition and function of the power cord, motor wiring, switch box, and accessories at least twice a year.

Troubleshooting

• Problem: Manual control not responding. Solution: Check the hand control connection interface for looseness and ensure the circuit board is not the issue. Mark the original position of the plug.
• Problem: Motor not responding. Solution: Adjust the position of the motor connector.
• For gearbox replacement or ordering spare parts, contact customer service with the model number and date of purchase.

Disposal

Dispose of used electrical equipment, accessories, and packaging at environmentally friendly recycling centers. Do not dispose of electrical equipment in household waste. Follow the regulations for the disposal of such equipment. According to Directive 2012/19/EU, waste electrical and electronic equipment must be collected separately and handed over to collection points for WEEE. Old equipment contains fully recyclable components and should therefore be recycled.

Storage and Transport

The device should be transported in its original packaging at a temperature between -20°C and +50°C. Store the device in a well-ventilated room with a relative humidity of no more than 75%. Operating temperature is between +10°C and +40°C. During storage and transport, the device must not be thrown, dropped, or exposed to mechanical shocks or weather influences.