ACTIVESHOP Sillon 210 Cosmetic Chair

Importer Information

Importer: ACTIVESHOP Sp. z o.o.

Address: ul. Graniczna 8b, bud. DC2A, 54-610 Wrocław, Poland

Website: www.activeshop.com.pl

Revision: A/05/2025

[QR Code for multilingual information]

Product Overview and Dimensions

This document provides instructions for the ACTIVESHOP Sillon 210 hydraulic cosmetic chair.

Dimensions:

Assembly Instructions

Follow these steps to assemble the Sillon 210 chair:

1. Insert the cushions into the chair base.
2. Attach the height adjustment lever to the actuator using part R.
3. Mount the actuator onto the chair base and secure it with parts V, U, and T.
4. Attach the metal frame of the seat to the chair base and fasten it with parts L, M, and N.
5. Attach part F, securing it with parts I, J, and H.
6. Connect both parts F using part G.
7. Tighten parts J and H, and repeat on the other side.
8. Insert parts D and K, and screw them in using parts B and C.
9. Attach the support legs using part E.
10. Mount the seat onto the drive shaft and tighten using parts Q, P, and O.
11. Insert the armrests as shown in the illustration.

[Diagrams illustrating each assembly step are provided in the original document.]

Chair Functions

• Lifting the seat: Lift the seat by pressing the lever.
• Lowering the seat: Press down on the seat until it lowers completely.
• Reclining the seat: Lift the lever upwards as much as possible.

Safety Precautions

General Warnings:

• Do not sit down suddenly or throw your weight onto the chair.
• Do not move or transport the chair with people or loads on it.
• Do not stand on the chair with your feet or knees.
• Do not rock the chair.
• Do not sit on the armrests.
• Ensure only one person uses the chair at a time.

Electrical Safety and Handling:

• Before cleaning, unplug the unit from the electrical outlet.
• Do not place any objects on the cables.
• Do not position the chair where the power cable can be stepped on.
• Always unplug the power cable from the outlet when finished working with the unit.
• Do not insert anything into the chair's openings. If a foreign object enters an opening, unplug the unit and contact the distributor or manufacturer.
• Do not place the chair on unstable trolleys, shelves, or vehicles, as it may be damaged if it falls.
• To ensure a stable lifespan, allow a one-minute interval before pressing the power button again (when switching on/off or vice versa).
• The power supply must match the specifications on the nameplate. Using an incorrect power supply may cause damage or failure.
• In case of damage to the power cable or other malfunctions, contact an authorized service center to avoid hazards.

Child Safety:

• This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• The appliance is not intended for play. Do not allow children to play with the appliance.
• Do not leave the appliance unattended when children or persons unfamiliar with its use are nearby.
• This electrical appliance is not a toy. Improper use or contact with the electrical appliance can pose a risk to health or cause death. The appliance must be used and stored out of reach of children.

Cleaning and Disinfection

To maintain the chair's surface in good condition, regular cleaning is necessary. Clean and disinfect the chair after each use. Thorough disinfection is recommended once a month.

Cleaning Surfaces:

• Metal and Plastic Surfaces: Wipe with a damp cloth. Use a small brush for hard-to-reach areas. Do not use excessive liquid. Disinfect with an appropriate liquid.
• Stainless Steel Surfaces: Cleaning with a mild detergent solution is best. Ammonia and most solvents can be used for tough stains. Avoid chlorine-based solutions.
• Lacquered or Chrome-Plated Metal Surfaces: Do not use water jets (showers, high-pressure water guns). Do not clean at high temperatures or high humidity. Do not expose to conditions that could cause liquid contamination. Do not use solvents or acids for cleaning.
• Chair Upholstery: Evenly wipe the seat surface with a special leather cleaner and then wipe with a clean, soft cloth.

Maintenance

1. Daily Cleaning: Remove dust with a soft, dry cloth.
2. Removing Stubborn Dirt: Use a soft cloth with a diluted neutral cleaning agent, then wipe with a dry cloth.
3. Prohibited Substances: Benzene, thinners, gasoline, or other solvents are prohibited as they can damage the upholstery or the product.
4. Storage and Operating Conditions: Do not expose the product to strong sunlight or moisture, as this may cause damage.

Safety Measures (VARNOSTNI UKREPI)

This appliance is professional equipment intended for use in cosmetic salons by trained cosmetic personnel to avoid undesirable consequences during treatments.

• Do not disassemble or attempt to use the appliance for purposes other than those stated in these instructions.
• All maintenance and repair work must be performed only by an authorized service technician (ACTIVESHOP Sp. z o.o.).
• Do not install or use the appliance near liquids, in wet areas, or with wet hands to prevent liquid ingress.

In the following cases, immediately unplug the appliance and contact the authorized service:

• If liquid has entered the appliance.
• If the appliance emits unusual smells, smoke, or noises.
• If the power cable is damaged.
• If the appliance has overturned or its housing is damaged.

Disposal

Dispose of used electrical appliances, wiring, and packaging at recycling centers in accordance with environmental protection principles. Electrical appliances must not be disposed of in household waste bins. Follow the rules for disposing of such equipment. In accordance with Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), used electrical equipment must be collected separately and taken to collection points for waste electrical and electronic equipment. Used and old appliances contain components that can be fully recycled, so they must be handed over for processing. Therefore, they must be handed over at appropriate collection points, including to ACTIVESHOP Ltd.

Storage and Transport

The unit can be transported in its original packaging within a temperature range of -20 °C to +50 °C. Store the unit in a well-ventilated area with relative humidity up to 75%. The operating temperature range is +10 °C to +40 °C. During storage and transport, the appliance must not be dropped, thrown, or exposed to mechanical impacts or atmospheric factors.