TONSTAD Chest of Drawers
Safety First: Preventing Tip-Over
⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over.
It is imperative to ALWAYS secure this furniture to the wall using the provided tip-over restraints.
To further reduce the risk of serious injury and death from tip-overs:
- Place the heaviest items in the lowest drawer.
- Do not place televisions or other heavy objects on top of this product.
- Never allow children to climb or hang on drawers, doors, or shelves.
These critical safety warnings are provided in multiple languages within the original documentation.
What's Included
The package contains all necessary components for assembly and wall mounting:
Tools Required:
- Screwdriver (Phillips head) ?
- Hammer ?
- Drill ?️
Drill Bit Sizes:
- Ø 8 mm (5/16")
- Ø 3 mm (1/8")
Hardware & Components:
A comprehensive list of screws, dowels, cam locks, drawer runners, and wall mounting hardware is provided with specific part numbers (e.g., 109567, 10087223, 118331, 101350, 151705, 159991, 10048881, 10127303, 10046078, 113434, etc.). The wall mounting bracket and associated fixings are also included.
Assembly Guide
Step 1: Prepare Side Panels
Attach the drawer runners to the inner surfaces of the side panels using screws (e.g., 10048881, 10127303).
Step 2: Prepare Back Panel
Insert dowels (e.g., 109049, 100823, 106989) into the edges of the back panel.
Step 3: Assemble Main Frame Base
Insert dowels (e.g., 118331) into the base panel. Connect one side panel to the base panel, aligning dowels and securing with cam locks.
Step 4: Attach Second Side Panel
Connect the second side panel to the base panel, aligning dowels and securing with cam locks.
Step 5: Attach Top Panel
Insert dowels into the top panel. Place the top panel onto the side panels and secure with cam locks.
Step 6: Secure Frame
Reinforce the main cabinet frame by inserting screws (e.g., 10046078) into pre-drilled holes.
Step 7: Install Drawer Bases
Position the drawer base panels onto the frame and secure them from underneath using screws (e.g., 10046078).
Step 8: Start Drawer Assembly
Insert dowels (e.g., 101350) into the edges of drawer front/back panels. Attach drawer side panels to the drawer front panel.
Step 9: Insert Drawer Bottom
Slide the drawer bottom panel into the grooves of the assembled drawer sides and front. Secure the drawer back panel using screws (e.g., 10083447, 10091526, 106603).
Step 10: Continue Drawer Frame
Assemble the drawer frame by inserting screws (e.g., 118331) into the drawer side panels and connecting them to the drawer front.
Step 11: Drawer Frame Assembly
Continue assembling drawer frames, inserting dowels (e.g., 101350) and securing with cam locks.
Step 12: Drawer Sides & Front
Connect the drawer side panels to the drawer front panel.
Step 13: Complete Drawer Box
Assemble the drawer frame by connecting the sides to the front and back panels.
Step 14: Attach Cam Lock Posts
Screw cam lock posts (e.g., 113434) into the designated holes on the drawer panels.
Step 15: Attach Drawer Fronts/Handles
Attach drawer front panels or handles using screws (e.g., 151706, 151705).
Step 16: Secure Drawer Components
Use screws (e.g., 101350) to secure various drawer components.
Step 17: Mount Drawer Fronts
Attach the drawer front panels to the assembled drawer boxes using the cam lock system (posts and locks, e.g., 151706, 151705).
Step 18: Secure Drawer Boxes
Reinforce the drawer boxes by inserting screws (e.g., 159991) into the sides.
Step 19: Position Cabinet
Carefully turn the assembled cabinet upright. Adjust the leveling feet if present.
Step 20: Install Cabinet Runners
Attach the corresponding drawer runners to the inside of the cabinet frame using screws (e.g., 100823, 109567).
Step 21: Insert Drawers
Slide the assembled drawers into the cabinet runners.
Wall Mounting Instructions
Proper wall mounting is crucial for safety. Follow these guidelines:
Wall Types & Fixings:
- Type A (Solid Wall): Drill a Ø 8 mm hole, insert the plug, and screw in the fixing.
- Type B (Hollow Wall): Drill a Ø 8 mm hole, insert the plug, and screw in the fixing.
- Type C (Solid Wood): Drill a Ø 3 mm hole and screw directly into the wood without a plug.
If you are uncertain about your wall type or the correct fixings, always seek professional advice.
Attaching Bracket to Cabinet:
Secure the wall mounting bracket to the back of the cabinet using screws (e.g., 100823, 109567).
Step 24: Drawer Component Assembly
Assemble the individual drawer components as shown.
Step 25: Attach Drawer Fronts
Connect the drawer front panels to the assembled drawer boxes.
Step 26: Secure Drawer Sides
Use screws (e.g., 10096669) to secure drawer side components.
Step 27: Secure Drawer Base
Use screws (e.g., 120076) to secure the drawer base.
Step 28: Final Drawer Front Attachment
Attach the final drawer front or handle using screws (e.g., 10083447, 10091526, 106603).
Step 29: Insert Drawers into Cabinet
Slide the completed drawers into the runners mounted inside the cabinet.
Step 30: Final Drawer Insertion & Check
Insert the drawers fully. A ? "Click!" sound indicates the runners are properly engaged. Ensure the unit is securely fastened to the wall ⚠️.
Step 31-33: Drawer Insertion
Continue inserting all drawers. Ensure smooth operation and proper runner engagement.
Step 34: Final Assembly Check
Review the entire assembled unit to ensure all parts are correctly fitted and secured.
Final Safety Check
Confirm that the furniture is stable and securely attached to the wall using the tip-over restraints. The final diagram shows the chest of drawers with drawers in place, and a hand adjusting the wall mounting bracket for secure attachment.
