Assembly Instructions
Brand: IKEA
Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints.
To further reduce the risk of serious injury and death from tip-overs:
Tools:
Wall Mounting Hardware (included):
Check all parts against the list below. Part numbers are indicated where applicable.
Refer to specific steps for exact quantities and part numbers used.
Attach the drawer slides labeled 'CR' (Right) and 'CL' (Left) to the inner sides of the main frame panels. Use 9 screws (10047245) for each slide. Ensure correct alignment.
Insert the internal divider panels into the base panel and secure them from the underside.
Connect the side panels to the base and top panels using screws (e.g., 105811, 158473, 10075558, 10051084). Slide and secure the back panels using screws (e.g., 10093081, 10093082).
Screw the legs into the base of the unit using screws (e.g., 100001, 10120564, 10003283).
Attach the horizontal support rails to the inside of the frame using screws (e.g., 10120564, 10121698, 10114605).
Install the drawer runners into the frame. Secure them using various screws (e.g., 150688, 10075558, 10051084, 190459, 10040242).
Assemble the 6 drawer boxes by connecting the sides, back, and base panels using screws (e.g., 126916, 158469, 159553). Attach the drawer fronts. Then, attach the drawer runners to the sides of each drawer box using screws (e.g., 119976, 10109447).
Carefully slide the assembled drawers into the corresponding runners in the main frame.
Important: To prevent furniture tip-over, it is essential to secure this furniture to the wall using the provided tip-over restraint hardware.
Wall Type Guide:
If you are uncertain about your wall type or the correct mounting procedure, please seek advice from a qualified professional.
![]() |
RÅDMANSÖ Dresser Assembly Instructions | IKEA Comprehensive assembly guide for the IKEA RÅDMANSÖ dresser, featuring detailed steps, safety warnings, and wall-mounting instructions. |
![]() |
TONSTAD Chest of Drawers Assembly Instructions Comprehensive assembly guide for the IKEA TONSTAD chest of drawers, featuring step-by-step instructions, safety precautions, and wall-mounting advice for secure installation. |
![]() |
TONSTAD Chest of Drawers Assembly Instructions | IKEA Step-by-step assembly guide for the IKEA TONSTAD chest of drawers. Learn how to safely build and secure your furniture to the wall, including detailed instructions for all assembly stages. |
![]() |
RÅDMANSÖ Chest of Drawers Assembly Instructions | IKEA Comprehensive assembly guide for the IKEA RÅDMANSÖ chest of drawers. Includes important safety warnings regarding furniture tip-over and step-by-step instructions for secure installation. |
![]() |
IKEA RÅDMANSÖ Chest of Drawers Assembly Instructions Comprehensive guide for assembling the IKEA RÅDMANSÖ chest of drawers. Includes essential safety warnings regarding furniture tip-over and step-by-step instructions with textual descriptions of diagrams and parts. |
![]() |
STOREMOLLA Chest of 3 Drawers Assembly Instructions and Safety Guide Comprehensive assembly instructions and crucial safety information for the IKEA STOREMOLLA chest of 3 drawers. Learn how to safely assemble and secure your furniture to prevent tip-over accidents. |
![]() |
BRIMNES Chest of Drawers Assembly Instructions | IKEA Detailed assembly instructions for the IKEA BRIMNES chest of drawers. Learn how to safely build and secure your BRIMNES furniture to the wall to prevent tip-over accidents. |
![]() |
IKEA SUNDVIK Changing Table/Chest of Drawers Assembly Instructions Comprehensive assembly instructions for the IKEA SUNDVIK changing table and chest of drawers. Includes safety warnings, parts list, and step-by-step guidance for building and securing the furniture. |