TONSTAD

Important Safety Information

⚠️ WARNING

Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer.
• Do not set TVs or other heavy objects on top of this product.
• Never let children climb or hang on drawers, doors, or shelves.

Tools Required

The following tools are typically needed for assembly:

• Screwdrivers (Phillips head and flat head) ?
• Hammer ?
• Drill with drill bits (Ø 8 mm / 5/16" and Ø 3 mm / 1/8") ड्रिल
• Saw (potentially for wall mounting adjustments) ?

Included Parts Overview

The package contains various components and hardware. Key parts include:

• Side panels
• Top and bottom panels
• Back panels
• Drawer slides (left and right)
• Drawer components (sides, front, back, bottom)
• Handles
• Wall anchoring hardware (screws, plugs, brackets)
• Various screws, dowels, and connectors (e.g., 10127303, 10048881, 118331, 101350, 151705, 151706, 10096669, 10083447, 10091526, 106603, 120076, 153549, 159991, 190459)

Assembly Instructions

Step 1: Attach Drawer Slides to Side Panels

Lay out the main panels. Attach the drawer slides (part 10127303) to the designated positions on the inner sides of the main cabinet panels using screws (part 10048881). Ensure correct orientation (left/right). Use 6 screws per slide.

Step 2: Prepare for Wall Anchoring

Identify the wall anchoring bracket (part 109567) and associated screws (parts 109049, 100823) and plugs (part 106989). This step prepares the unit for securing to the wall.

Step 3: Attach Wall Anchoring Components

Attach the wall anchoring bracket to the top rear of the cabinet using screws. This bracket will be used to secure the unit to the wall.

Step 4: Assemble Base Structure

Connect the base panels and side panels using the provided connectors and screws. Follow the visual guides to ensure correct alignment and secure fastening.

Step 5: Connect Main Panels

Join the side panels and internal dividers using the provided hardware. The diagrams show how to connect these pieces, often using dowels and cam locks or screws.

Step 6: Continue Frame Assembly

Continue connecting the main structural components of the cabinet, ensuring all connections are firm.

Step 7: Add Internal Dividers

Insert and secure any internal vertical or horizontal dividers as shown in the diagrams.

Step 8: Form the Main Cabinet Box

Assemble the primary box structure of the cabinet, connecting the sides, top, bottom, and back supports.

Step 9: Insert Shelf Supports/Dividers

Insert dowels (part 101350) into pre-drilled holes on the internal panels. Use 12 dowels for this step.

Step 10: Install Top/Bottom Panels

Place the top and bottom panels onto the assembled frame. Secure them using screws (part 159991). Use 8 screws for this step.

Step 11: Attach Base Supports

Connect the base support pieces to the bottom of the cabinet using screws (part 118331). Use 6 screws.

Step 12: Attach Additional Base Supports

Attach further base support elements using screws (part 101350). Use 2 screws.

Step 13: Connect Side Panels

Join the side panels to the main structure, ensuring they are flush and secure.

Step 14: Attach Back Supports

Secure the back support pieces to the cabinet frame.

Step 15: Install Drawer Runners

Attach the drawer runners (part 113434) to the cabinet interior. Use 6 runners in total, with screws (part 151705).

Step 16: Prepare Drawer Fronts

Attach the drawer front mounting hardware (parts 151706, 151705) to the drawer fronts. Use 4 sets of hardware.

Step 17: Install Drawer Pins

Insert drawer pins (part 101350) into the drawer sides. Use 9 pins.

Step 18: Assemble Drawer Boxes

Connect the sides, back, and bottom panels of the drawers. Secure using the provided hardware, including parts 151706 and 151705.

Step 19: Attach Drawer Handles

Attach the handles (part 153549) to the drawer fronts using screws.

Step 20: Secure Drawer Boxes

Fasten the assembled drawer boxes to the main cabinet structure using screws (part 159991). Use 5 screws.

Step 21: Adjust Cabinet Levelling

Use the adjustable feet (part 190459) to level the cabinet. Turn the feet clockwise or counter-clockwise as needed. Use 5 feet.

Step 22: Attach Drawer Slides to Drawers

Attach the corresponding drawer slide components to the sides of the assembled drawers. Ensure they click into place securely. Use 2 sets of slides per drawer.

Step 23: Insert Drawers

Slide the assembled drawers into the cabinet, aligning them with the drawer slides.

Step 24: Wall Mounting Instructions

This step is crucial for safety. The supplied screws and plugs are designed for different wall types:

• Type A (Solid Walls): Use the screw and plug combination. Drill a Ø 8 mm (5/16") hole, approximately 70 mm (2 3/4") deep. Insert the plug, then screw into the plug.
• Type B (Hollow Walls): Use the screw and plug combination. Drill a Ø 8 mm (5/16") hole, approximately 30 mm (1 1/4") deep. Insert the plug, then screw into the plug.
• Type C (Solid Wood): Use the screws without plugs. Drill a Ø 3 mm (1/8") hole, approximately 30 mm (1 1/4") deep. Screw directly into the wood.

If unsure about your wall type or the correct hardware, consult a professional. Secure the furniture to the wall using the provided bracket and appropriate fixings.

Step 25: Final Drawer Attachment

Attach the drawer fronts to the assembled drawer boxes. Ensure the connection is secure.

Step 26: Drawer Assembly Detail

Detailed view showing how drawer components connect, often involving sliding parts into grooves and securing them.

Step 27: Attach Drawer Front Panel

Attach the front panel of the drawer to the assembled drawer box.

Step 28: Secure Drawer Front

Use screws (part 10096669) to secure the drawer front to the drawer box. Use 4 screws.

Step 29: Final Cabinet Assembly

Complete the main cabinet structure, ensuring all panels are correctly aligned and fastened.

Step 30: Attach Drawer Knobs/Handles

Attach the drawer knobs or handles (parts 10083447, 10091526, 106603) to the drawer fronts using the provided screws.

Step 31: Insert Drawer Slides

Slide the drawer slides into the cabinet, ensuring they engage correctly with the runners.

Step 32: Insert Drawers and Lock

Carefully insert the drawers into the cabinet. Listen for a 'click' sound to confirm they are properly seated and locked onto the slides. Use 2 sets of locking mechanisms per drawer.

Step 33: Final Drawer Insertion

Ensure all drawers are fully inserted and functioning smoothly.

Step 34: Drawer Slide Adjustment

Adjust the drawer slides if necessary for smooth operation.

Step 35: Final Drawer Placement

Insert the drawers into the cabinet and ensure they slide easily. Confirm the 'click' mechanism engages.

Step 36: Final Check and Placement

Ensure all drawers are installed correctly and the unit is stable. The diagram shows the final configuration with all drawers in place.

Important: Always ensure the furniture is securely anchored to the wall to prevent tip-over accidents. Refer to Step 24 for detailed wall mounting instructions.