IKEA MALM 3-Drawer Chest Assembly Instructions

Important Safety Warnings

WARNING: Furniture Tip-Over Hazard

Serious or fatal crushing injuries can occur if this furniture tips over. To prevent this, it MUST be secured to the wall using the provided tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place the heaviest items in the lowest drawer.
• Do not place TVs or other heavy objects on top of this product.
• Never allow children to climb or hang on drawers, doors, or shelves.

Assembly Guide

This guide outlines the steps to assemble your IKEA MALM 3-drawer chest. Please identify all parts and hardware before beginning. You will typically need screwdrivers, a hammer, and a drill.

Building the Main Cabinet Frame

1. Attach metal brackets (2x) to the side panels using screws (28x).
2. Assemble the base structure by connecting the base panels using screws (4x).
3. Attach vertical supports to the base panels using screws (6x).
4. Attach the drawer runners to the inside of the side panels using screws (3x).
5. Attach the back support bar using screws (2x) and an additional bracket using screws (1x).
6. Connect the side panels to the base structure using cam locks (3x).
7. Attach the back panel using screws (6x).
8. Attach the wall mounting brackets to the top and side panels using screws.
9. Place the assembled frame upright and secure it with screws (4x).
10. Attach the top panel to the frame and secure it using cam locks (6x).

Assembling the Drawers

Repeat the following steps for each drawer:

1. Attach drawer runners to the sides of each drawer box (2x per drawer).
2. Assemble the drawer box by connecting the drawer sides, bottom, front, and back panels using the provided screws and cam locks. Ensure the bottom panel slides into the grooves and is secured.
3. Attach the drawer top panel.
4. Secure the drawer assembly with the appropriate hardware.

Final Steps and Wall Mounting

21. Insert the assembled drawers into the main cabinet frame. Check that they slide smoothly.
22. Crucial Safety Step: Secure to Wall
23. To prevent tip-over accidents, it is essential to securely attach the furniture to the wall using the provided wall mounting hardware.
24. Wall Mounting Hardware Guide:
25. The supplied screws and plugs are designed for different wall types:
    • Type A (Solid Walls): Use screws without plugs.
    • Type B (Hollow Walls): Use screws with plugs.
    • Type C (Solid Wood): Use screws without plugs.
26. If you are unsure about your wall type or the correct installation method, please consult a professional for advice.