YOSHIDA PRO-SPRAY LCD FRÉZKA - User Manual

Introduction

The YOSHIDA PRO-SPRAY LCD FRÉZKA is an ideal device for cosmetic salons and podology practices. Its striking metal casing and practical plastic elements create a perfect aesthetic for this unique milling machine. The robust handle on the top of the casing allows for easy carrying.

The handpiece is from the well-known Marathon brand. It is constructed from metal alloys and several plastic components. It is lightweight, vibration-free, and fits perfectly in the hand.

The illuminated liquid container has a capacity of 250 ml. It is very easy to remove, clean, and refill. The liquid is supplied via a hose connected to the other side. The spray connected to the handpiece will be easily accessible during treatment. Spray intensity is adjusted using a rotary dial. The spray can be turned on or off using a button on the display.

Package Contents

Preparation for Use

1. Rotate the locking ring half a turn, as indicated by the arrow, to open the chuck.

2. Insert the burr fully.

3. Rotate the locking ring (as indicated by the arrow) to securely fix the burr.

4. Connect the handpiece plug to the corresponding socket on the base unit and the water hose to the water supply socket.

5. Remove the container, as shown in Figure 1. Unscrew the container lid and fill with the appropriate amount of water, ensuring it does not exceed the "max" line. Then, tighten the lid. Ensure the lid is tightly sealed, as insufficient tightening could damage the mill. Place the container into the base unit, aligning the protrusion on the lid with the groove in the base unit (see illustration below).

6. Connect the device to an electrical outlet.

Operation Start: Touch the POWER button to turn on the unit. The mill will start with the manufacturer's preset speed of 15. You can then start the mill using the "Start/Pause" button on the display or via the foot switch.

Display and Operation

The display shows "Welcome!" upon powering on. The main interface includes:

• POWER Button: [?] Turns the unit on/off.
• START/PAUSE Button: ▶️ / ⏸️ Starts or pauses the milling operation.
• Touch Panel/Display: Shows settings and operational status.

Display Settings:

• Speed Adjustment: Speed can be adjusted in standby mode or during use, ranging from 10 to 40. Use the arrow buttons [◀] and [▶] to set the desired speed.
• User Presets (M1-M6): This button allows for setting and saving individual user preferences. Click to enter parameter settings. This function enables saving 6 types of settings with different speed and rotation direction configurations, and activating the spray function.

User Manual Guide:

1. Selecting Saved User Presets: Press the M1 button to enter the program selection screen (M1-M6). Pressing the M1 button again changes its color to orange, indicating a saved program has been selected. Press the return button [↩] to display the saved working parameters.
2. Saving User Presets: Press the M1 button to select a working program; M1 will appear on the display with user settings. Adjust the operating parameters. Press the "Save" button (located in the bottom right corner) to save. The color will change to blue, indicating the parameters have been saved. Press the return button [↩] to exit.

Handpiece Functions:

• Rotation Direction: You can select clockwise or counter-clockwise rotation. [?]
• Spray Function: Toggle for spray selection - ON/OFF. [?]
• Display Window: This animated window shows the handpiece's operation. Clicking the window starts or pauses the activity.

Operating Instructions

1. Grip the handpiece.
2. Configure settings, direction, check the spray function, or select a suitable program.
3. Press the spray button and adjust the water spray power using the spray control dial.
4. Start the mill using the START/PAUSE button on the display or the foot switch. (Note: Initially, compressed air will be released from the sprayer, followed by water after approximately 10 seconds).
5. Carefully bring the burr to the nail. The spray rinses away dust. Adjust the water spray volume using the dial during operation. Wear protective eyewear when using the mill.

System Settings

1. Change Password

Turn on the unit. The operating screen will appear. Press and hold the pause button for 3 seconds to display the settings panel.

Click the "Change Password" button and enter the old password. The system will display a prompt to enter a new password (if the password is not correct, a prompt will appear).

Enter the new password, and a prompt to confirm it will appear. If an incorrect password is entered twice, re-enter the new password. The password must consist of 4 digits.

Operating Time Check:

You can check the total operating time of the unit by holding the START/PAUSE button for 3 seconds. The settings panel will appear; click "Used time" to display the total operating time.

To reset the total operating time, press the "Reset" button and enter the password. The operating time will be reset.

Pressing "Continue" will return you to the settings without resetting the operating time. If the entered password is incorrect, it must be entered again.

Language Selection:

Turn on the unit. The operating screen will appear. Press and hold the pause button for 3 seconds to display the settings panel.

Click "Language" to access the language selection panel. Select the desired language (e.g., ENGLISH, CHINESE).

After selecting the language, the unit will display "Welcome!" and then the settings panel.

If you need to make settings displayed on the screen, select the "Settings" option.

Important Usage Notes

1. Before turning on the base unit, connect the handpiece with the burr attached.
2. Do not install parts that do not fit the machine.
3. Use the device only for its intended purpose.
4. Avoid overloading the machine, especially prolonged operation at maximum speed, as this may damage the handpiece.
5. Keep the machine out of reach of children.
6. Maintain a clean working environment.
7. Apply sufficient force when using the burr; overloading the mill can cause damage.
8. Avoid accidental activation of the handpiece without a burr attached.
9. Do not touch the machine while it is running.
10. Keep away from water and fire.
11. Do not use the machine in damp areas.
12. Wear protective eyewear.
13. Turn off the power after use to ensure safety.

Troubleshooting

Handpiece Operation Manual

Functions:

• An internal dust protection cover prevents dust from entering the machine.
• A high-precision spindle ensures smooth, vibration-free operation.
• The handpiece is suitable for autoclave disinfection at temperatures up to 135°C.
• The handpiece is compatible with any E-type motor.

Burr Installation:

Rotate the burr locking ring in the direction of the black arrow to open the chuck. Insert the burr into the chuck.

Maintenance

For handpiece maintenance, use a burr maintenance fluid or an alcohol-free disinfectant such as Panaspray.

Tips for Maximizing Burr Lifespan:

• Do not use bent or damaged burrs.
• Overloading caused by damaged burrs quickly destroys ball bearings.
• Before use, clean burr shanks. If grease or other substances cause them to stick to the spindle, it can lead to vibrations, poor spindle performance, or other irregularities.
• Always insert the burr fully into the chuck.

Safety Precautions

1. This is a professional device intended for use in cosmetic practices. Operation by qualified cosmetic personnel prevents undesirable effects during treatment.
2. The device must not be disassembled or attempted to be used for purposes other than those stated in this manual. All service operations and repairs must be performed only by an authorized service technician (ACTIVESHOP Sp. z o.o.).
3. Do not install or use the device near liquids, in wet areas, or with wet hands to prevent liquids from entering the device.
4. In the following cases, immediately unplug the device from the socket and contact the authorized service provided by ACTIVESHOP Sp. z o.o.: (a) liquid has entered the appliance, (b) the appliance emits an unusual smell, smoke, or strange sounds, (c) the power cable is damaged, (d) the appliance has been tipped over or its casing damaged.
5. Do not place any objects on the cables. Do not install the device in places where someone might step on the power cable.
6. For safety reasons, always pull the power cable from the socket when you finish working with the appliance.
7. Do not insert anything into the appliance's openings. If a foreign object enters an opening, unplug the cable and contact the distributor or manufacturer.
8. Do not place the appliance on an unstable trolley, shelf, or vehicle. The appliance may be damaged if it falls.
9. To ensure the appliance's lifespan, it is recommended to observe a one-minute interval before pressing the power button again (between switching on and off, and vice versa).
10. The power supply must comply with the specifications indicated on the product label. Otherwise, there is a risk of malfunction, damage, or even fire.

CAUTION:

1. In case of damage to the power cable or other faults, contact an authorized service center to prevent danger.
2. This appliance may be used by children aged 8 years and above, and by persons with reduced physical and mental capabilities, or persons lacking experience and knowledge of the device, provided they are supervised or instructed on safe use and understand the associated risks.
3. The device is not intended for children to play with. Do not allow children to play with the device.
4. Do not leave the appliance unattended when children or persons without sufficient knowledge of its use are nearby.
5. This electrical appliance is not a toy. Improper use or contact with the electrical appliance can pose a health risk or lead to death, so the appliance should be used and stored out of reach of children.

Disposal of the Appliance

Dispose of used electrical appliances, accessories, and packaging at recycling centers in accordance with environmental protection principles. Electrical appliances should not be disposed of in household waste bins. Follow the regulations for the disposal of these types of devices. In the interest of environmental protection, in accordance with Directive 2012/19/EU concerning waste of used electrical and electronic equipment, electrical and electronic devices must be collected separately and handed over at collection points for used electronic and electrical equipment.

Old appliances, after the end of their service life, also contain fully recyclable components, and therefore should be handed over for recycling. They should be handed over at appropriate collection points, and you can also hand them over to ACTIVESHOP s.r.o.

Storage and Transport

The device should be transported at a temperature ranging from (-) 20°C to (+) 50°C only in its original packaging.

Store the unit in a well-ventilated room with a relative humidity not exceeding 75%. Operating temperature is from (+) 10°C to (+) 40°C. During storage and transport, the device must not be thrown or dropped, nor exposed to mechanical impacts or atmospheric influences.