ACTIVESHOP Mini pro203 Milling Machine

User Manual

Image: A pink/rose gold ACTIVESHOP Mini pro203 milling machine.

Notes (Märkus)

• Regularly clean the device to prevent dirt, dust, and other undesirable substances from accumulating, which could cause malfunctions or damage.
• Do not wrap the power cord around the device; this may cause cord malfunctions.
• Always ensure the device is powered by a source with the correct voltage. Verify the plug is correctly inserted into the socket. Failure to do so may cause fire, electric shock, or burns.
• Do not modify, stretch, excessively bend, or twist the cable.
• Do not place heavy objects on the cable.
• Avoid dust or other harmful elements entering the socket or port by using dust removers.
• Do not hit or throw the device. If damaged due to impact or dropping, it cannot be used further.
• Do not attempt to disassemble or repair the device. For repairs, contact the dealer or an authorized service center.

Preparation Before Use (Ettevalmistus enne kasutamist)

• Ensure the head speed is set to the minimum level.
• Ensure the cutter is properly locked.
• Hold the head and turn on the power button.

Product Use (Toote kasutamine)

Use the potentiometer to set the desired speed.

Left/Right Speed Setting

The rotation direction of the workpiece can be changed using the switch located next to the potentiometer. Changing the rotation direction is only possible when the motor is switched off.

Diagram: Milling machine control unit with labels for speed adjustment and a switch. A USB cable connects the machine to the control unit.

Cutter Replacement

To replace the cutter, move the switch to the center position – the cutter will stop. Then, firmly insert or pull out the cutter.

Included Cutters:

• Various types of cutters for different tasks (e.g., shaping, cuticle work, surface preparation).

Images: Step-by-step visual guide showing how to insert or remove a milling bit from the handpiece.

Technical Specifications (Tehnilised andmed)

Safety Measures (OHUTUSMEETMED)

1. This is a professional device intended for use in beauty salons. Use by qualified cosmetic personnel avoids undesirable effects during treatment.
2. Do not disassemble or attempt to use the device for purposes other than those specified in this manual. All maintenance and repair work must be performed only by an authorized service technician (company ACTIV Tomasz Pacholczyk).
3. Do not install or use the device near liquids, wet areas, or with wet hands, to prevent liquids from entering the device.
4. In the following cases, immediately unplug the device from the socket and contact the authorized service provided by ACTIV Tomasz Pacholczyk:
   • (a) liquid has entered the device,
   • (b) the device emits a strange smell, smoke, or makes unusual noises,
   • (c) the power cord is damaged,
   • (d) the device has been overturned or its casing is damaged.
5. Do not place any objects on the cables. Do not place the device where someone might step on the power cord.
6. For safety, unplug the power cord from the socket every time you finish working with the device.
7. Do not insert anything into the device openings. If a foreign object enters an opening, unplug the cord and contact the dealer or manufacturer.
8. Do not place the device on an unstable trolley, shelf, or vehicle. The device may be damaged if it falls.
9. To ensure the device's longevity, it is recommended to wait one minute between switching the power button on and off (and vice versa).
10. The power supply must meet the specifications on the data plate. Otherwise, there is a risk that the device may not work properly, get damaged, or even burn out.

Caution (ETTEVAATUST)

1. In case of damage to the power cord or other malfunctions, contact an authorized service center to avoid danger.
2. This device can be used by children aged 8 and above, and persons with reduced physical and mental capabilities, and those lacking experience and knowledge, provided they are supervised or instructed on safe use and understand the associated risks.
3. The device is not intended for children to play with. Do not allow children to play with the device.
4. Do not leave the device unattended if children or persons unfamiliar with its use are nearby.
5. This electrical device is not a toy. Improper use or contact with the electrical device can pose a health risk or cause death. Therefore, the device must be used and stored out of the reach of children.

Device Disposal (SEADME KÕRVALDAMINE)

[do not dispose with household waste symbol]

Dispose of used electrical equipment, accessories, and packaging at recycling centers in accordance with environmental protection principles. Electrical devices must not be disposed of in household waste containers. Follow the regulations for this type of device disposal. To protect the environment, in accordance with Directive 2012/19/EU on waste electrical and electronic equipment, used electrical equipment must be collected separately and then handed over to collection points for used electrical and electronic equipment.

At the end of their useful life, old devices contain fully recyclable components and should be handed over for recycling. Therefore, they should be handed over to appropriate collection points or to the company ACTIV Tomasz Pacholczyk.

Storage and Transport (LADUSTAMINE JA TRANSPORT)

• The device must be transported at a temperature between (-) 20 °C and (+) 50 °C, only in its original packaging.
• The device should be kept in a well-ventilated room where the relative humidity does not exceed 75%.
• The operating temperature is between (+) 10 °C and (+) 40 °C.
• During storage and transport, the device must not be dropped or allowed to fall, and must not be exposed to mechanical impacts or weather conditions.