ACTIVESHOP Sprint 48 Nail Drill Machine

Product Overview

The ACTIVESHOP Sprint 48 is a professional nail milling machine renowned for its high build quality, compact dimensions, and modern design. It features a clear, user-friendly control panel and intuitive operation, making it suitable for both experienced professionals and beginners. The milling head achieves speeds ranging from 0 to 30,000 RPM and is equipped with a TWIST-LOCK chuck for quick and easy bit changes.

Important Note: Changing the voltage to 110V will cause permanent and irreversible damage to the machine.

Key Components

The machine and its accessories are comprised of the following main parts:

Operating Instructions

Caution: Unlocking the handle during operation will damage the machine. Changing bits while the motor is running will damage the clutch. Such damage is not covered by warranty. Bits must be changed with the handle in the unlocked position, and the drill must be powered off.

1. Connect the power adapter to a power outlet.
2. Connect the handpiece to the three-pin socket on the base unit.
3. Changing the Bit:
   1. Hold the handpiece. Turn the rotating ring clockwise until you hear a "click" and the indicator aligns with the open padlock symbol.
   2. Remove the current bit.
   3. Insert the new bit.
   4. To lock the bit, turn the rotating ring counter-clockwise until you hear a "click" and the indicator aligns with the closed padlock symbol.
4. Activate the milling function. Use the start/stop button to adjust the milling speed sequentially.
5. Change the rotation direction (forward/reverse) as needed.

Maintenance Notes: Do not immerse the handpiece heads in liquids. Avoid excessive moisture during disinfection, as liquid ingress can cause damage. Clean dust from the head before disinfection. Regular maintenance with a suitable product is recommended. The head must be cleaned and protected from dust; claims for dust-related damage due to improper use will not be accepted.

Note on Twist-Lock: The handle opening mechanism may feel resistant when no bit is inserted. This is normal and due to the design.

Technical Specifications

• Power Supply: 220-240V, 50-60Hz
• Housing: Ergonomic design
• Rotation: Right and left rotation
• Controls: On/off switch and speed control located on the base
• Speed Adjustment: Continuous speed control
• Handpiece Lock: Rotating lock for easy bit changes
• Bit Diameter: 2.32 mm
• Power Output: 35W
• Base Weight: 780g
• Head Weight: 160g
• Available Colors: White, Black, Silver

Dimensions

Troubleshooting

Machine Does Not Activate

• Ensure the machine is properly connected to the power supply.
• Verify that the machine is switched on (refer to item 4 in the diagram).
• Check the handpiece cable for damage. If damaged, it needs replacement (available from Activeshop).
• Inspect the power cord for damage. If damaged, contact Activeshop service.

Handpiece Overheats

• Confirm that the Twist-Lock mechanism is securely closed.

Important Note: Bit changes should only be performed when the drill is powered off via the switch (item 4). Reducing the speed to its minimum setting (item 4) does not turn the machine off; it only lowers the operational speed. Changing bits on an active drill, even at minimum speed, can lead to handpiece overheating and potential damage, which is not covered by the warranty.

Safety Measures

1. This is professional equipment intended for use in beauty salons by trained personnel to avoid adverse treatment outcomes.
2. Do not disassemble the unit or attempt to use it for purposes other than those specified. All servicing and repairs must be performed by an authorized ACTIVESHOP Sp. z o.o. service technician.
3. Avoid installing or operating the device near liquids, in wet areas, or with wet hands to prevent liquid ingress.
4. Immediately unplug the device and contact an authorized service center if:
   • Liquid has entered the device.
   • The device emits an unusual odor, smoke, or strange noises.
   • The power cord is damaged.
   • The device has been tipped over or its casing is damaged.
5. Do not place objects on the power cables. Ensure the device is not placed where the power cord can be stepped on.
6. For safety, always unplug the power cord from the socket when finished using the device.
7. Do not insert any objects into the device openings. If a foreign object enters an opening, unplug the device and contact the distributor or manufacturer.
8. Do not place the device on unstable carts, shelves, or vehicles, as it may be damaged if dropped.
9. To ensure stable operational lifespan, allow a one-minute interval between power on/off cycles.
10. The power supply must meet the specifications listed on the device's nameplate. Failure to do so may result in malfunction, damage, or fire.

Cautions Regarding Use

1. In case of power cord damage or other malfunctions, contact an authorized service center to prevent hazards.
2. This device may be used by children aged 8 years and older, and by individuals with reduced physical or mental capabilities, or lack of experience and knowledge, provided they are supervised or have received instruction on safe use and understand the associated risks.
3. The device is not a toy and should not be used as such by children. Do not allow children to play with the device.
4. Do not leave the device unattended when children or persons unfamiliar with its operation are nearby.
5. This electrical device is not a toy. Improper use or contact with the device can pose health risks or be fatal; therefore, it must be used and stored away from children.

Disposal of the Device

Dispose of used electrical devices, accessories, and packaging at recycling centers in accordance with environmental protection principles. Electrical devices should not be disposed of in household waste bins. Follow the regulations for this type of equipment. In compliance with Directive 2012/19/EC on waste electrical and electronic equipment, used electrical devices must be collected separately and delivered to designated collection points. Devices at the end of their lifecycle contain fully recyclable components and should be sent for recycling. Deliver them to appropriate collection points and ACTIVESHOP Ltd.

Storage and Transport

The device should be transported between -20°C and +50°C, preferably in its original packaging. Storage should be in a well-ventilated area with relative humidity not exceeding 75%. The operating temperature range is +10°C to +40°C. During storage and transport, the device must not be dropped, subjected to mechanical vibrations, or exposed to adverse atmospheric conditions.