Resistex Miks Lighting Fixture Installation Guide

About the Miks Fixture

The Resistex Miks is a versatile lighting fixture designed to provide efficient illumination. It is available with options for adjustability and low luminance.

Resistex: Lighting You Differently

Important Safety and Maintenance Guidelines

Safety Notes

• Never work on the fixture when it is live. [power-off symbol]
• Installation must be performed by a professional installer in compliance with electrical installation standards and regulations.
• Risk of electrostatic discharges (ESD Norm). Handle with necessary precautions. [ESD warning symbol]
• Please observe the notes and steps described in the mounting instructions. [instructions symbol]

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture. [cleaning symbol]
• Keep these instructions for dismantling or future maintenance. [document symbol]
• Consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product. [general warning symbol]

Installation Procedure

Step 1: Prepare the Mounting Hole

Cut a circular hole in the mounting surface with a diameter of Ø69 mm (±1 mm).

Step 2: Insert the Fixture

Insert the lighting fixture into the prepared hole. [insert fixture]

Step 3: Secure the Fixture

Rotate the fixture to secure it in place. [rotate to secure]

Step 4: Prepare Wiring Connections

Open the electrical connection terminal block. [electrical terminal block]

Step 5: Connect Wires

Connect the power supply wires (Live 'L', Neutral 'N', and Earth) to the corresponding terminals in the block. [L] [N] [Earth]

Step 6: Close Terminal Block

Close the terminal block securely. [close terminal block]

Step 7: Final Assembly

Ensure the fixture is correctly positioned and secured. [fixture installed in ceiling]

Step 8: Verification

Perform a connection check to ensure proper installation. [connection verification]

Company Details and Certifications

RESISTEX EXPLOITATION

11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Tél. 04 93 276 276 - Fax 04 93 276 280 - contact@resistex-sa.com

APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 € - T.V.A. F.R. 73 487 593 477

Certifications: [ROHS symbol] ROHS Compliant, [IP65 symbol] IP65 Rated, [Class II symbol] Class II, [CE symbol] CE Marked, [IK07 symbol] IK07 Rated, [warranty symbol] 5 Year Warranty