Manuals+

Momcozy BM01 5-inch HD LCD Video Baby Monitor User Guide

Model: BM01

Safety Instructions

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft / 0.9 m away). Do not remove this tag.

⚠ NEVER place the camera or cord in or near the crib or playpen.

⚠ NEVER mount the camera directly above the crib or playpen to avoid the risk of injury.

⚠ Only use the AC adapters provided.

⚠ Never use the unit near water, including near a bathtub, sink, laundry machine tube, wet basement, etc.

⚠ Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat.

⚠ Only use attachments and accessories specified by the manufacturer.

⚠ Unplug this device when unused for long periods.

✅ Check the reception regularly. Test the camera before use and after changing the camera's location.

✅ For indoor use only.

✅ Clean the camera with a dry cloth only.

✅ Do not block any ventilation openings.

✅ Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5 m / 4.9ft apart.

Caution

⚠ NOT toys. Do not allow children to play with them.

⚠ This product is NOT intended to replace the proper supervision of children. You MUST check your child's activity regularly.

⚠ This product is not intended for use as a medical camera and its use should not replace adult supervision.

⚠ Unplug the product during lightning storms.

⚠ Please check the operating range and condition of the camera carefully at the initial installation, and on a regular basis after that.

Package Contents

Product Overview

Monitor

  1. Power On/Off & LCD On/Off: Press and hold for 3 seconds to turn on/off the monitor. Short press: Turn on/off the LCD screen. When the screen is turned on, press and hold for 8 seconds to reset the system.
  2. Volume Adjustment: Press the left button (◀) to reduce speaker volume, and the right button (▶) to increase.
  3. Menu: Press ≡ to enter/exit the menu.
  4. Camera Switch: Press ↻ to switch to another camera if connected with two or more cameras.
  5. Charging Indicator: Solid blue during charging, off when fully charged; Blinking red when in low power state.
  6. Up Button: Press ⌃ to move the camera upward or change selection upward.
  7. Left Button: Press ◀ to move the camera leftward or change selection leftward.
  8. Right Button: Press ▶ to move the camera rightward or change selection rightward.
  9. Confirm/Zoom Button: Press ✓ to zoom in/out or confirm selection.
  10. Down Button: Press ⌄ to move the camera downward or change selection downward.
  11. Monitoring Status Indicator: Green. Flashes slowly when disconnected, quickly when in pairing mode, steady when turned on.
  12. Sound/Signal Indicator: 1. The louder the sound, the more indicators are on. 2. Signal indicator (temperature alarm/off-connection alarm/feeding alarm).
  13. Talk: Press 🔊 to talk to your baby.
  14. Lullaby: Press ♫ to select your desired lullaby song.
  15. Sound Indicator: The louder the sound, the more indicators are on.
  16. Microphone
  17. Stand
  18. Speaker

Camera

  1. Night Vision Sensor
  2. Camera Lens
  3. Microphone
  4. Speaker
  5. Antenna
  6. Pair Button
  7. Charging Port
  8. Infrared LEDs
  9. Temperature Sensor
  10. Threaded Socket

Getting Started

1. Charging & Powering Baby Monitor

  1. Connect the monitor adapter to the monitor and a power outlet.
  2. Unplug the unit when its power indicator turns off, indicating a full charge. Unplugging after full charge prolongs device lifespan.

2. Powering Camera

  1. Connect the camera to a power source via the USB Type-C cable and camera adapter.

File Info : application/pdf, 17 Pages, 3.10MB

PDF preview unavailable. Download the PDF instead.

User-Manual-Momcozy-Video-Baby-Monitor

References

    Adobe Illustrator CC 2017 (Windows) GPL Ghostscript 9.25; modified using iText 5.0.3 (c) 1T3XT BVBA

    Related Documents

    Preview Momcozy Video Baby Monitor BM01 User Guide
    User guide for the Momcozy Video Baby Monitor BM01, featuring a 5" HD LCD screen. This guide provides instructions on setup, operation, functions, troubleshooting, and specifications for both the monitor and camera.
    Preview Momcozy Video Baby Monitor BM01 User Guide
    Comprehensive user guide for the Momcozy Video Baby Monitor BM01, detailing setup, features, operations, and troubleshooting for optimal use.
    Preview Momcozy 5" Dual-Mode Smart Baby Monitor User Guide
    User guide for the Momcozy 5" Dual-Mode Smart Baby Monitor (Model BM04), covering setup, features, and safety instructions.
    Preview Agent Authorization Letter for momcozy Video Baby Monitor (BM01)
    Letter of Agent Authorization from Hong Kong Lute Technology Co., Limited for the momcozy Video Baby Monitor (Model BM01), authorizing Shenzhen BCTC Testing Co., Ltd for equipment authorization.
    Preview Momcozy BS03 Auto Bottle Washer User Manual
    This user manual provides comprehensive instructions for operating and maintaining the Momcozy BS03 Auto Bottle Washer. It covers safety precautions, operating modes, installation, troubleshooting, and product specifications.
    Preview Momcozy BS03 Auto Bottle Washer User Manual
    Comprehensive user manual for the Momcozy BS03 Auto Bottle Washer, detailing features, operation, maintenance, and troubleshooting for safe and effective use.
    Preview Momcozy BS03 Auto Bottle Washer User Manual - Operation, Safety, and Troubleshooting
    Comprehensive user manual for the Momcozy BS03 Auto Bottle Washer. This guide provides detailed instructions on installation, operation, safety precautions, maintenance, and troubleshooting for efficient bottle cleaning and sterilization.
    Preview Momcozy BS03 Auto Bottle Washer User Manual
    Comprehensive user manual for the Momcozy BS03 Auto Bottle Washer, covering safety guidelines, operating instructions, assembly, maintenance, troubleshooting, product specifications, and error codes.