Momcozy 5" Dual-Mode Smart Baby Monitor User Guide

Introduction

Momcozy and its affiliates possess exclusive intellectual property rights concerning the operation, composition, software, design, graphical user interface (GUI), logo, external packaging, and decoration of the Product, which are protected under law by patents, copyright, and trademarks. Momcozy reserves the right to take appropriate actions against infringement upon these rights beyond the scope of fair use and without Momcozy's written permission.

Safety Instructions

Strangulation Hazard: Children may be STRANGLED by cords. Keep this cord out of the reach of children (more than 3 ft / 0.9 m away). Do not remove this tag.

[Image: Illustration showing a crib with a cord extending from a monitor, with a '3 ft' measurement indicating the required distance from the crib. Another image shows a child with a red circle and slash over a power cord, indicating a hazard.]

• NEVER place the camera or cord in or near the crib or playpen.
• NEVER mount the camera directly above the crib or playpen to avoid the risk of injury.
• Only use the AC adapters provided.
• Never use the unit near water, including bathtubs, sinks, washing machine hoses, damp basements, etc.

Package Contents

[Image: Illustrations of the camera, monitor, wall mount bracket, power adapters (US, EU, UK), camera charging cable (2.5m), monitor charging cable (1.5m), mounting screws kit, and user guide.]

Note: Power adapter specifications vary by region.

Description of Key Functions

[Image: Diagram of the monitor with numbered callouts pointing to: 1. Power On/Off 2. Volume Adjustment 3. Menu 4. Return 5. Directional Pad 6. OK/ZOOM 7. Talk 8. Photo/Record 9. Charging/Warning Indicator Light 10. Signal Connection Indicator Light 11. Sound 12. Microphone 13. Charging Port 14. Speaker 15. Monitor Bracket ]

Monitor Functions:

• Power On/Off: Press and hold for 3 seconds.
• Volume Adjustment: Press [+] or [-] to adjust monitor volume.
• Menu: Short press the [Home] button to enter/exit the main menu.
• Return: Press to go back to the previous step.
• Directional Pad: Use up, down, left, right buttons to control camera angle on the video screen. Press to select menu items.
• OK/ZOOM: Short press to toggle between 1x, 2x, and 4x zoom. Short press to confirm menu selection.
• Talk: Press and hold to talk to your baby.
• Photo/Record: Short press to capture a screenshot. Press and hold for 3 seconds to start/stop video recording.
• Charging/Warning Indicator Light: Steady blinking white: Charging. Solid white: Fully charged. Solid red: Low battery. Blinking red: Temperature/Sound warning.
• Signal Connection Indicator Light: Slow blinking blue: Pairing. Solid blue: Paired (disappears 3 minutes after successful pairing).
• Sound: Signal light illuminates and dims to indicate sound level.
• Microphone
• Charging Port
• Speaker
• Monitor Bracket

Camera Functions:

[Image: Diagram of the camera with numbered callouts pointing to: 1. Camera Lens 2. Microphone 3. Antenna 4. Signal Indicator 5. Pair button 6. Temperature Sensor 7. Charging Port ]

• Signal Indicator: Blue light flashing slowly: Signal searching. Blue light rapidly flashing: Pairing. Solid blue light: Paired.
• Pair: Press once to hear a "beep" indicating readiness to pair.
• Temperature Sensor
• Charging Port

Charging the Baby Monitor

Please fully charge the monitor before use.

1. Connect the USB Type-C end of the charging cable (1.5 m) to the baby monitor and the other end to the power adapter (5V = 2A).
2. Plug the power adapter into a power outlet.

[Image: Illustration showing the monitor being charged via USB Type-C cable and power adapter.]

Powering the Camera

1. Connect the USB Type-C end of the charging cable (2.5 m) to the camera and the other end to the power adapter (5V = 2A).
2. Plug the power adapter into a power outlet.

[Image: Illustration showing the camera being charged via USB Type-C cable and power adapter.]

You may use the camera and monitor once the monitor is fully charged and the camera is powered.

Mounting the Camera

Placement of the Camera

1. We recommend positioning the camera 2.5 ft (0.75 m) above the ground.
2. We recommend a minimum of 4.9 ft (1.5 m) of distance between the camera and the infant.

Note: Please ensure the camera's power cable is positioned where your baby cannot see it when installing and operating the device.

[Image: Diagram showing recommended camera placement height (0.75m/2.5ft) and distance from the crib (1.5m/4.9ft).]

Wall Mounting the Camera (Corner)

1. Locate a suitable mounting area.
2. Place the wall mount bracket on the mounting area, and mark the screw holes with a pencil.
3. Drill holes (6.0 mm) in the wall and insert screw anchors into the holes.
4. Insert the screws into the mounting holes of the wall mount bracket, then screw into the anchors.
5. Align the camera with the grooves to fix its position on the wall mount bracket, then tighten the mounting screw to secure it in place.
6. Once mounted, you can adjust the camera's angle (upward, downward, left, and right) on the monitor's control panel to choose the ideal angle for your monitoring.
7. Note: Please confirm that the camera is mounted correctly and is secured firmly.

[Image: Series of illustrations showing the steps for wall mounting the camera bracket and attaching the camera.]

Pairing the Camera with the Baby Monitor (Adding a New Camera)

When you power on the monitor and the camera for the first time, they will automatically pair. Please refer to the following steps if you want to add a new camera or reset an existing device to factory settings.

1. Press the [Home] button to access menu options. To add a new camera, choose [Camera settings] → [Add camera], then click [OK].
2. Press the [Pair] button on the rear of the camera for 1 second until you hear a "beep”.

[Image: Screenshot of the monitor interface showing 'Camera settings' with options like 'Add camera', 'Delete camera', 'Display mode', and 'Camera volume'. Another image shows the 'Searching for camera...' screen.]

Note:

• If you want to connect to more than one camera, press and hold [OK] for 2 seconds to quickly switch the screen. Alternatively, choose [Camera settings] → [Display] to set Loop Playback or Split Screen mode.
• If you want to record manually, press the [Directional Pad] to choose a view, and then press [Photo/Record] to take photos and video recordings. Short press to take photos. Press and hold for 3 seconds to begin recording. Press and hold for another 3 seconds to end recording.

Pair the Camera with the App (Pairing via Wi-Fi)

The product can be used in conjunction with the Momcozy app.

1. Download the app: Search for the "Momcozy" app in your phone's app store before downloading and installing it.
2. Register and log in to the app:
   • Create an account on the app and log in.
   • If you have already registered, please log in.
3. Add device:
   1. Go to the app's homepage and tap "Add Device".
   2. Then select the "BM04" device to start pairing.
   3. Follow the instructions in the app to connect the camera to a power source and wait for the camera to complete the startup process.
   4. Select your home's Wi-Fi network and enter the password. (Please note that you need to select the 2.4G network.)
   5. Point the QR code at the camera until you hear a "beep", which indicates that the device has started connecting automatically.
   6. Once connection has been achieved, set the product name to get started.

[Image: Screenshots of the Momcozy app interface showing the process of adding a device, selecting the BM04, setting up Wi-Fi, and scanning a QR code.]

Note:

• Pairing via Wi-Fi supports only 2.4 GHz Wi-Fi networks.
• Due to app upgrades and updates, actual operations may differ from the guide above. Please follow the instructions in the current app.
• If the pairing fails, please reset the Wi-Fi network and repeat the steps above.

Pairing Failure: You can attempt other pairing methods in the app.

Remove device: In the app, go to the device's Settings page and tap Remove Device. After the device has been removed, the camera will automatically restart.

Reset Wi-Fi Network: Long press the [PAIR] button on the camera for 8 seconds until you hear two "beeps".

[Image: Illustration of the camera with the 'PAIR' button highlighted.]

Explanation of Menu Functions in the Baby Monitor

1. Press and hold [Power On/Off] for 3 seconds to turn on.

2. Press [Home] to enter the menu.

Monitor Menu Bar Icons

Specifications

Monitor

Momcozy 5" Dual-Mode Smart Baby Monitor

• Model Number: BM04
• Operating Range: 1000 ft (line of sight, no obstructions)
• Selectable Camera Channels: 4
• Power Adapter Input Voltage: 100-240V AC, 50/60 Hz
• Camera Input: 5V-2A
• Monitor Input: 5V-2A
• Rated Capacity: 5000mAh
• Wireless Connection: Wi-Fi IEEE 802.11b/g/n 2.4GHz

Camera

• Connectivity: 2.4GHz ISM Band
• Image Compression: MJPEG
• Input: 5V-2A
• Pan-n-Tilt: 110 degrees vertical (Up=60°, Down=50°), 350 degrees horizontal (Left=175°, Right=175°)
• Zoom: Zoom In (2X), Zoom In (4X)
• Night Vision: Black & white image
• IR LED: Non-visible IR LED with wavelength of 940nm
• Rated Capacity: Yes
• Two-Way Talk: Yes
• Storage Temperature: -20°C to 60°C / -4°F to 140°F
• Operation Temperature: 0°C to 40°C / 32°F to 104°F

Compliance Statement

1. Please use the supplied AC Power Chargers and USB C Charging Cables.

2. Do not use the device in environments with extreme temperatures, and avoid exposing the device to strong sunlight or overly humid conditions.

3. The appropriate ambient temperature for S6-M and accessories is -20°C to 45°C.

4. The appropriate ambient temperature for S6-C and accessories is -20°C to 40°C.

5. Place the device in a normal room temperature and well-ventilated environment during charging. It is recommended to charge the device within the temperature range of 0°C to 45°C.

Warning Instructions

1. Choking hazard: Power cords can pose a risk of strangulation for children. Keep the cord out of reach of children (more than 3ft / 0.9m away).
2. Note: Illustrations of products, accessories, interfaces, etc., in the manual are for reference only and are schematic. Due to product updates and upgrades, there may be slight differences between the actual product and the illustrations. Please refer to the actual product.

Warning

Video Baby Monitor (Camera)

FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ① This device may not cause harmful interference, and ② this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation.

IC Warning

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: ① this device may not cause interference, and ② this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : ① l'appareil ne doit pas produire de brouillage, et ② l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS-102 – Radio Frequency (RF) Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

le dispositif de a été évalué à répondre général rf exposition exigence. pour maintenir la conformité avec les directives d'exposition du RSS-102-Radio Fréquence (RF). ce matériel doit être installé et exploitÃé à une distance minimale de 20 cm entre le radiateur et votre corps.

CAN ICES-003(B)/NMB-003(B)

Video Baby Monitor (Monitor)

FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ① This device may not cause harmful interference, and ② this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The SAR limit of USA(FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Video Baby Monitor (Monitor) with BM04 (FCC ID: 2A6UA-BM04-B) has also been tested against this SAR limit. The highest reported SAR values for body-worn is 0.579W/kg. This equipment should be installed and operated with a minimum distance of 0mm between the radiator and your body.

IC Warning

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: ① this device may not cause interference, and ② this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : ① l'appareil ne doit pas produire de brouillage, et ② l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS-102 – Radio Frequency (RF) Exposure guidelines. The SAR limit of IC is 1.6 W/kg averaged over one gram of tissue. Device types Video Baby Monitor (Monitor) with BM04 (IC: 29085-BM04B) has also been tested against this SAR limit. The highest reported SAR values for body-worn is 0.579W/kg. This equipment should be installed and operated with a minimum distance of 0mm between the radiator and your body.

L'appareil a été évalué pour répondre aux exigences générales en matière d'exposition aux RF. Maintenir la conformité à la norme RSS-102 – lignes directrices sur l'exposition aux radiofréquences (RF). La limite du das de l'ic est de 1,6 W/kg en moyenne sur un gramme de tissu. Types de dispositif moniteur vidéo de bébé (moniteur) avec BM04 (IC: 29085-BM04B) a également été testé contre cette limite de das. Le das le plus élevé signalé pour le port corporel est de 0,579W/kg. Cet équipement doit être installé et utilisé à une distance minimale de 0mm entre le radiateur et votre corps.

CAN ICES-003(B)/NMB-003(B)

Warning

Hereby, the licensed company declares that this BM04 product is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU. Environmentally friendly disposal.

You can help protect the environment!

Please remember to respect the local regulations: hand in non-functioning electrical equipment to an appropriate waste disposal center.

Warning: Batteries or battery packs installed must not be exposed to excessive heat such as sunshine, fire or similar.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

The radio frequencies 2412-2472MHz can be used in Europe without restriction.

This product is intended for sale and application in a business environment.

Warranty & Customer Service

12 months guarantee (contact information can be found on the monitor or on the cover of this user manual)

WEEE COMPLIANCE

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. "This symbol indicates DC voltage.

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. The user has the choice to give their product to a competent recycling organization or to the retailer when they buy a new electrical or electronic equipment.

EU Compliance Statement: Hong Kong Lute Technology Co., Limited hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.

[CE Logo] Made in China