INOR LCD-H210 Digital Loop Kwadoro LCD Ngosipụta Akwụkwọ ntuziaka Onye ọrụ

NDỤMỌDỤ NDỊ MMADỤ
LCD-H210
Ihe Ngosipụta LCD Akwadoro Digital Loop N'ime Isi Njikọ
A ga-agụrịrị ntuziaka onye ọrụ tupu emezigharị na/ma ọ bụ nrụnye. Enwere ike ịgbanwe ozi niile na-enweghị ọkwa. MATỤTA Ọganiihu
INOR Process AB, PO Box 9125, SE-200 39 Malmö, Sweden, Ekwentị: +46 40 312 560, Fax: +46 40 312 570, E-mail: support@inor.se
INOR Transmitter OY, Unikkotie 13, FI-01300 Vantaa, Finland, Ekwentị:+358 10 421 7900, Fax: +358 10 421 7901, E-mail: myynti@inor.fi
INOR Transmitter GmbH, Am Lee 24, D-47279 Duisburg, Germany, Ekwentị: +49-203 7382 762 0, Fax: +49-203 7382 762 2, E-mail: info@inor-gmbh.de
KROHNE Temperature Division INOR, 55 Cherry Hill Drive, Beverly, MA 01915, United States
Ekwentị: +1 978 826 6900, Fax: +1 978 535 1720, E-mail: inor-info@krohne.com
www.inor.com, www.krohne-inor.se www.krohne-inor.fi, www.inor-gmbh.de
E kwesịghị ịgwakọta ngwaahịa a na ụdị scrap ndị ọzọ, mgbe ejiri ya. Ekwesịrị ijikwa ya dị ka ngwa eletrọnịkị/ọkụ eletrik.
ỤMỤTA ỌGANỤRỤ

Okwu mmalite
LCD-H210 bụ aka dijitalụ kwadoro LCD egosi etinyere n'ime isi njikọ nwere windo. Emebere isi njikọ ahụ ka etinyere ya na ihe mmetụta okpomọkụ ma nwee ike ịkwado ya na DIN B head mount 2-wire transmitter. A na-etinye ihe ngosi LCD ozugbo na 4-20 mA loop na-enweghị mkpa maka ike mpụga. Ihe ngosi na-egosi ụkpụrụ ọnụọgụ dị na nso site na -1999 ruo 9999 nhata na mgbama ntinye 4-20 mA na ngosi dijitalụ.
OZI IZUGBE
A na-ejikọta ihe ngosi LCD n'ime isi njikọ ma jiri ya gosipụta ụkpụrụ ọnụọgụ nke dabara na mgbama usoro analog nke 4-20mA na nso site na -1999 ruo 9999 na ngosi dijitalụ. Ihe ngosi a na-agbanye aka na aka ma jikọọ ya na 4-20 mA loop nke nnyefe 2-waya ma ọ bụ ngwaọrụ ọ bụla na-emepụta akara 4-20 mA. A haziri isi njikọ aluminom na windo polycarbonate ka ọ dabara na ihe mmetụta okpomọkụ ma nwee ike ịkwado ya na DIN B head mount 2-wire transmitter maka nleba anya usoro uru. Ngwa a na-ahụkarị bụ iji LCD-H210 dabara na ihe mmetụta okpomọkụ wee jikọọ na 4-20 mA loop site na ihe mkpuchi mgbaàmà maka mpaghara. view nke okpomọkụ tụrụ. Ngosipụta LCD dị elu, nke nwere ọnụọgụ 4 na azụ azụ na-eme ka ngosi dị mfe ịgụ na ọnọdụ ọkụ ọ bụla. A na-eme nhazi nke ihe ngosi site na NFC na ngwa smartphone INOR Connect ma ọ bụ jiri bọtịnụ ntinye atọ.
Ozi! Akwụkwọ ntuziaka a na-akọwa n'ụdị dị nkenke ọrụ dị iche iche na data teknụzụ maka ngosipụta, maka nkọwa zuru ezu, biko lelee akwụkwọ ntuziaka maka Module LCD-D100.
Kpachara anya! Enwere ike ịrụ nrụnye, mgbakọ, mmalite na mmezi naanị site na ndị ọrụ zụrụ azụ nke ọma. A ghaghị idebe ntuziaka ahụike na nchekwa ọrụ mpaghara mgbe niile.

DATA (ụdị mkpụmkpụ)

Ngosipụta modul Ụdị ntinye ihe dị ugbu a Kachasị dị ugbu a kacha nta maka ịrụ ọrụ Voltage dobe Ngosipụta Ngosipụta ọkụ azụ azụ akara ọnụọgụ Digit Height Decimals Underoke/Oge nzaghachi oge mmetụta okpomọkụ Usoro nhazi nhazi
Ezi ezi NAMUR NE 43 nnabata HART transperent njikọ eletrik
Isi njikọ Ụdị Ihe nke ahụ / windo
eriri eriri USB D2 Usoro njikọ eriri D1 / oghere d1 Ụdị agba/ klaasị nchekwa agba

Ụdị INOR LCD-D100 4-20 mA 30 mA ~ 3.5 mA 4.5V
7-ngalaba ojii LCD nwere okirikiri doro anya White LED kwadoro site na 4-20 mA loop 4 digits (-1999 ka 9999) 8.89 mm / 0.35 ″ Nhọrọ, 0 ka 3 akara ngosi Lo (I 3.6 mA) / HI (I 21.0 mAs) / HI (I 1 mAs), Ike na 5 nkeji na-egbu oge. ± 1% FS / °C 0.01 bọtịnụ push ma ọ bụ NFC, nke dị na azụ nke ngosi ± 3% nke span ± 0.05 digit Ee Ee Push-na njikọ mmiri, ngalaba obe 1 mm0.25-2 mm1.5
INOR nlereanya BUZ-HW Aluminom mgbali die-nkedo / Polycarbonate M20x1.5 M24x1.5 / Ø14 mm Polyester / ọcha aluminum (RAL 9006) Ruo IP65 (dabere na etinyere cable gland na akara maka usoro njikọ)

Ozi inye iwu

Ngwaahịa LCD-H210 LCD-H210 - LCD-D100 ahaziri - naanị modul ngosi

Akụkụ Nke 70LCDH2101 Na arịrịọ 70D1000001

114/4.48 41.5/1.63

LCD-H210 D2

Akụkụ
Ø 43 / 1.69 Ohere (polycarbonate) Ngosipụta modul LCD-D100

17/0.6 26/1.02

M24x1.5 Ø14 M20x1.5

d1 D1

4x M4X6

33/1.29

Ngosipụta nha 39.5 × 14.0 / 1.5 × 0.5 Dijit dị elu 8.9 / 0.35

mm / inch

Enwere ike ịtụgharị modul ngosi 180° Ngosipụta Ngosipụta

Azu view
1 2

N'ihu view 7

Agba RAL 9006 1 (aluminium ọcha)

1 2 3 4 PS+ +TX

1. Idozi kposara na isi njikọ

Akụkụ view

(2x M4)

2. Pịa bọtịnụ maka nhazi (3x)

3. NFC antenna

4. Mgbochi njedebe maka ọkụ eletrik

njikọ, Push-na mmiri njikọ

5. 4-nọmba LCD nwere backlight

6. Ngalaba injinia (°C dị ka defalut, akara

maka nkeji dị iche iche gụnyere)

7. Ebuburu eriri USB maka njikọ nke a

2-waya nnyefe (red +, ọcha –)

Akụkụ
LCD-D100 - Modul ngosi naanị 1
Azu view

63/2.48

1 2 3 4 PS+ +TX

1
1 N'ihu view

14/0.5

63/2.48 55/2.16

21/0.8 9.5/0.37

Akụkụ view
1 Idozi skru na isi njikọ
mm / inch

1 39.5 / 1.5 Ø 63 / 2.4 1
Njikọ

Nnyefe ike loop 2-waya nnyefe

+ 4-20 mA ~ 24 VDC _

4-20 mA _

Mmepụta

Nnyefe ike loop 2-waya nnyefe

+ ~ 24 VDC _

4-20 mA _

Ntinye

1 2 3 4 PS + +TX
1 Isi iyi dị ugbu a
4-20 mA
_+

1 2 3 4 PS + +TX
2
Rịba ama Njikọ ọnụ ọnụ ọnụ ọgụgụ 2 na 3 jikọtara ọnụ n'ime onwe ha

1 2 3 4 PS + +TX
3
1. Njikọ na egosi na ike ọkọnọ (maka transmitter) na 2-waya transmitter site na iji n'ime jumper n'etiti ọnụ 2 na 3 iji guzobe 4-20 mA loop ugbu a.
2. Njikọ na egosi na ike ọkọnọ (maka transmitter) na a 2-waya transmitter na-ejighị n'ime jumper n'etiti ọnụ 2 na 3.
3. Njikọ na egosi na isi iyi dị ugbu a (ihe mgbaàmà 4-20 mA na-arụ ọrụ)

Nhazi – via bọtịnụ Mpịakọta

Chekwa

Nkeji oge

-1 Nzọụkwụ

Chekwa -1
Nzọụkwụ

Nkeji oge

Chekwa

Nkeji oge

Nzọụkwụ

0000 3333

Chekwa

Nkeji oge

Nzọụkwụ

F 00 06

Chekwa

Nkeji oge

Nzọụkwụ

Chekwa

Nkeji oge

Nzọụkwụ

Fn 00 05 10 15 30

Chekwa

Nkeji oge

Nzọụkwụ

HLo gbanahụ

Chekwa

Nkeji oge

Nzọụkwụ

na agbanye

Nzọụkwụ

NchNhr

Nzọụkwụ

Mba

dEF

Ala

Nhazi – via bọtịnụ Mpịakọta

Ọrụ Ngosipụta, NAMUR NE 43

–

1 Pịa bọtịnụ nwere ọrụ nzọụkwụ (mbelata).
2 Pịa bọtịnụ tinye ọrụ 3 Pịa bọtịnụ nwere nzọụkwụ (bawanye)
ọrụ

1 Parameter aha 2 Uru ndabara ụlọ ọrụ 3 Uru ntọala ndabara na-ezo aka
iji gosi TAG / NJ bụ ọnụọgụ anọ ikpeazụ na nọmba nsonazụ.

Nkọwa nke oke:
1. Engineering uru metụtara ala ebe (4 mA), ndabara ntọala uru na-ezo aka 0.0 na ala ebe.
2. Engineering uru metụtara elu elu (20 mA), ndabara ntọala uru na-ezo aka 100.0 na elu ebe.
3. Ebe ntụpọ ntụpọ, uru ntọala ndabara na-ezo aka na 1 decimal. 4. Filter, ndabara ntọala uru na-ezo aka "Ọ dịghị nyo". 5. TAG Nọmba NJ, uru ntọala ndabara na-ezo aka na ọnụọgụ anọ ikpeazụ na se-
nọmba rial maka ngosi. 6. Ngosipụta oge mmelite, uru ntọala ndabara na-ezo aka melite ngosi 7. ozugbo. 8. Backlight mode, ndabara ntọala uru na-ezo aka backlight on ma na-egbu maramara
n'oge mkpu. 9. Ọnọdụ NFC, uru ntọala ndabara na-ezo aka na nhazi site na NFC. 10. Ndozi njehie, ntọala ndabara na-ezo aka na enweghị mgbazi njehie. 11. Tọgharịa azụ ka factory ndabara. 12. Kwụsị ịtọlite ma laghachi na ngosi.

Ozi! Gaa na akwụkwọ ntuziaka maka Ngosipụta Module LCD-D100 maka nkọwa zuru ezu nke ọrụ dị iche iche.

Nhazi – VIA APP
Tupu ịme nhazi nke LCD-H210 ị ga-eme ihe ndị a: 1. Jide n'aka na ị nwere ngwaọrụ mkpanaaka na NFC nkwurịta okwu na-arụ ọrụ 2. Budata ngwa INOR Jikọọ na ekwentị mkpanaaka gị.

Ụdị achọrọ: iOS iOS 13 ma ọ bụ mgbe e mesịrị na iPhone 7 ma ọ bụ mgbe e mesịrị maka NFC

Android 4.4 ma ọ bụ karịa

Usoro nhazi: 1. Mwepụta ngwa site na ịpị akara ngosi ngwa ma ọ bụ
Jide ekwentị mkpanaaka gị megide ngosipụta n'akụkụ ngwaọrụ ebe NFC dị (naanị gam akporo ga-ekwe omume).

2. Pịa na "Gụọ nhazi" ma jide ngwaọrụ mkpanaka gị megide ihe ngosi dị ka akọwara na ngalaba mbụ.

3. N'ime ngwa ahụ, ị nwere ike dezie ihe ndị a: · Ngosipụta ihe ngosi · Ọnọdụ ọnụọgụ iri · Ọnọdụ ihu azụ · Ntọala nzacha · TAG-ọ dịghị

Nyochaa koodu QR ka ibudata ma wụnye INOR Connect
Debe antenna NFC smartphone ozugbo na antenna NFC ngosi maka nhazi site na ngwa INOR Connect

4. Ozugbo i debere ụkpụrụ achọrọ na ngwa ahụ, ị na-ebufe ya na ngosi site na ịpị bọtịnụ nyefe ma jide ngwaọrụ mkpanaka megide ihe ngosi ahụ ruo mgbe igbe akwụkwọ ndụ akwụkwọ ndụ na-egosi na-egosi na e dechara nnyefe ahụ.

Ntinye ugbu a (mA) 21,0 mA 20,5 ruo <21,0 mA 20,0 ruo 20,5 mA 4,0 ruo 20,0 mA
3,8 ruo 4,0 mA> 3,6 ruo 3,8 mA 3,6 mA

Nkọwa mgbaàmà
Ọdịda n'ofe oke arụ ọrụ nke ọma ọdịda ọdịda

Ngosipụta na LCD-H210
HI na-egbuke egbuke Uru a kapịrị ọnụ (max. uru oke +3.1%) Oke ngosi agbatịgoro Oke ngosi ahaziri
Oke ngosipụta agbatịgoro Uru atụdoro (min. oke oke -1.25%) Lo

OKWU MMADỤ
INOR Process AB, ma ọ bụ ụlọ ọrụ ọ bụla ọzọ nwere mmekọ n'ime Inor Group (nke a na-akpọkọ ya dị ka "Inor"), na-enye ikike ugbu a na ngwaahịa a ga-enwere onwe ya pụọ na ntụpọ na ihe ma ọ bụ ọrụ maka afọ ise (5) site na ụbọchị nnyefe (" akwụkwọ ikike dị oke "). Akwụkwọ ikike a nwere oke maka ịrụzi ma ọ bụ dochie anya na nhọrọ Inor ma dị irè naanị maka onye ọrụ njedebe mbụ nke ngwaahịa ahụ. Mgbe ọ natachara akwụkwọ ikike, Inor ga-aza n'ime oge ezi uche dị na ya maka mkpebi ya gbasara:
1 Ma Inor anabatara ọrụ ya maka ntụpọ ọ bụla ekwuputara na ihe ma ọ bụ ọrụ; na, ọ bụrụ otú ahụ,
2 ihe kwesịrị ekwesị emere ihe omume (ya bụ ma Inor ga-edochi ma ọ bụ rụzie ngwaahịa nwere ntụpọ).
Akwụkwọ ikike a nwere oke na-emetụta naanị ma ọ bụrụ na ngwaahịa: 1 arụnyere dịka ntuziaka nke Inor wetara; 2 jikọtara ya na ọkụ ọkụ kwesịrị ekwesị; 3 adịghị eji ma ọ bụ mebie ya; na 4 enweghị ihe akaebe nke tampnbibi, imezi ihe, nleghara anya, mmebi mberede, mgbanwe ma ọ bụ rụkwaa na-enweghị nkwado nke Inor ma ọ bụ mmebi nke onye ọ bụla na-abụghị Inor mere ngwaahịa ahụ.
Inor nyere akwụkwọ ikike a nwere oke ma nwee naanị akwụkwọ ikike awara awara ewepụtara. INOR na-ekwupụta nke ọma n'akwụkwọ ikike ọ bụla a na-enyeghị n'ime ebe a yana akwụkwọ ikike, nkwa ma ọ bụ nnochite anya ka ọ dabara maka ebumnuche ọ bụla, arụmọrụ, ogo na ihe ọ bụla ọ bụla. Mmebi Nkwekọrịta, nke ma maka onyinye a, nwere ike ibilite site n'ịkọwapụta, ọrụ iwu, omenala azụmaahịa ma ọ bụ usoro ịmekọrịta, gụnyere KWESỊRỊ KWESỊRỊ nke MARA-Chantabilities na Fitness for Apartment. Ewezuga dị ka enyere n'ebe a, ma ọ bụ na-aga n'ihu na-ekwupụta ọrụ ọ bụla maka mfu, mmefu, adịghị mma, pụrụ iche, kpọmkwem, nke abụọ ma ọ bụ ihe ndị na-esi na ya pụta site na iji ihe onwunwe ma ọ bụ ihe eji eme ihe.
A ga-edozi ma ọ bụ dochie ngwaahịa ndị kpuchiri site na akwụkwọ ikike nwere oke na nhọrọ nke Inor. Onye ahịa na-akwụ Inor ibu ibu, na Inor ga-akwụ ụgwọ nkwụghachi azụ site na post ma ọ bụ ụzọ ụgbọ njem "nkịtị" ọzọ. Ọ bụrụ na a na-arịọ ụdị ibu nloghachi ọ bụla ọzọ, onye ahịa na-akwụ ụgwọ nloghachi dum.

Akwụkwọ / akụrụngwa

INOR LCD-H210 Digital Loop kwadoro LCD ihe ngosi ejikọtara [pdf] Akwụkwọ ntuziaka onye ọrụ
LCD-H210 Digital Loop Powered LCD Indicator Integrated, LCD-H210, Digital Loop Powered LCD Indicator Integrated, LCD Indicator Integrated, LCD Indicator Integrated, Indicator Integrated

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

INOR LCD-H210 Digital Loop Kwadoro LCD Ngosipụta Akwụkwọ ntuziaka Onye ọrụ

LCD-H210 Digital Loop Akwadoro LCD egosi Ejikọtara

Nkọwapụta

Ntuziaka ojiji ngwaahịa

1. Nwụnye

2. Ịkwanye LCD-H210

3. Njikọ Ọdụdọ

4. Nhazi

Ajụjụ A na-ajụkarị (FAQ)

Ajụjụ: Enwere ike iji LCD-H210 na ụdị sensọ ndị ọzọ?

Q: Gịnị bụ oge ikike maka LCD-H210?

Akwụkwọ / akụrụngwa

Ntụaka

Hapụ ikwu

Kagbuo nzaghachi