Intercom

Daim ntawv qhia kev teeb tsa

Cov ntaub ntawv naj npawb 770-00012 V1.2
Kho tshiab 11/30/2021

Tej yam koj
yuav tsum paub

• Latch Intercom xav tau Latch R txhawm rau ua haujlwm thiab tsuas tuaj yeem ua khub nrog ib tus R.
• Intercom installation yuav tsum tshwm sim ua ntej Latch R installation.
• Tsuas yog siv cov screws muab. Lwm cov ntsia hlau tuaj yeem ua rau Latch Intercom tshem tawm ntawm lub phaj mounting.
• Kev teeb tsa yuav tsum muaj iOS Tus Thawj Tswj App khiav ntawm iPhone 5S lossis tshiab dua.
• Ntau cov peev txheej, suav nrog cov ntawv hluav taws xob ntawm phau ntawv qhia no, tuaj yeem pom hauv online ntawm support.latch.com

Muaj nyob rau hauv lub thawv

Mounting Kho vajtse

• Pan taub hau screws
• Anchors
• Gel puv crimps
• Cable sealing Cheebtsam
• RJ45 txiv neej connector

Khoom

• Latch Intercom
• Mounting phaj

Tsis suav nrog hauv Lub Thawv

Mounting cuab yeej

• #2 Phillips taub hau ntsia hlau
• TR20 Torx kev ruaj ntseg ntsia hlau
• 1.5 "drill ntsis rau cable routing qhov

Kev xav tau rau Device

• 64 ntsis iOS no ntaus ntawv
• Qhov tseeb version ntawm Latch Manager App

Khoom Paub meej

Cov ntsiab lus thiab cov lus pom zoo rau lub zog, thaiv, thiab cov khoom specifications.

Khoom Paub meej

Direct Fais fab

1. 12VDC-24VDC
   50 watts khoom siv *
   * Chav Kawm 2 cais, UL teev DC fais fab mov

Yam tsawg kawg ntawm kev xaim kev pom zoo

Nyob deb		<25 ft ib	<50 ft ib	<100 ft ib	<200 ft ib	Kos
Hwj chim	12v XNUMX	22 AWG	18 AWG	16 AWG	–	4A
	24V *	24 AWG	22 AWG	18 AWG	16 AWG	2A

Yuav tsum xaiv Ethernet, Wi-Fi, thiab/lossis LTE kev twb kev txuas.
* 24V ib txwm nyiam tshaj 12V thaum ua tau.

Kev xaim

POE

1. PoE ++ 802.3bt 50 Watts Supply

Yam tsawg kawg ntawm kev xaim kev pom zoo

PoE Source	PoE ++ (50W ib qhov chaw nres nkoj)
Nyob deb	328ft (100m)
CAT Hom	5e	6	6a	7	8
Ntaub thaiv npog	Tiv thaiv
AWG	10-24 AWG
PoE Hom	PoE++

Nco tseg: PoE thiab lub zog ncaj qha yuav tsum tsis txhob siv ib txhij. Yog tias ob qho tib si txuas rau, xyuas kom meej tias PoE fais fab tuag ntawm PoE hloov rau Intercom PoE chaw nres nkoj.

Ethernet cable pom zoo kom ua tau raws li CMP lossis CMR ntsuas.

Kev xaiv ntawm Wi-Fi thiab / lossis LTE txuas ntxiv yog xaiv tau.

Qhov tsawg kawg nkaus network ceev yuav tsum yog tsawg kawg yog 2Mbps raws li kev soj ntsuam los ntawm lub network kuaj ntaus ntawv.

Paub meej View ntawm Cable

               

RJ45 Poj Niam Hom Connector Direct Fais Fab Kev Txuas

Khoom Paub meej

Mounting Phaj

1. Centerline Mark
2. Txhawb Cable Hook
3. Tus lej txheej txheem

Nco tseg: Xa mus rau ADA Cov Lus Qhia ntawm mounting qhov siab.

1. Microphone
2. Zaub
3. Navigational Khawm
4. Kev Ruaj Ntseg
5. Hais lus Mesh

Specifications

Qhov ntev

• 12.82 hauv (32.6cm) x 6.53” (16.6 cm) x 1.38” (3.5 cm)

Network

• Ethernet: 10/100/1000
• Bluetooth: BLE 4.2 (iOS thiab Android tau tshaj)
• Wi-Fi: 2.4Ghz/5Ghz 802.11 a/b/g/n/ac
• Cellular LTE Cat 1
• DHCP lossis Static IP

Hwj chim

• Chav Kawm 2 cais, UL teev cov khoom siv hluav taws xob
• 2 Hlau Supply Voltage: 12VDC rau 24VDC
• Lub hwj chim dhau Ethernet: 802.3bt (50W +)
• Lub zog ua haujlwm: 20W-50W (4A @ 12VDC, 2A @ 24VDC)
• Rau UL 294 kev teeb tsa, lub zog hluav taws xob yuav tsum ua raws li ib qho ntawm cov qauv hauv qab no: UL 294, UL 603, UL 864, lossis UL 1481. Thaum siv los ntawm PoE, PoE qhov yuav tsum yog UL 294B lossis UL 294 Ed.7 ua raws. Rau ULC 60839-11-1 kev teeb tsa, lub zog hluav taws xob yuav tsum ua raws li ib qho ntawm cov qauv hauv qab no: ULC S304 lossis ULC S318.
• DC input soj ntsuam rau UL294: 12V DC 24V DC

Warranty

• 2-xyoo txwv warranty ntawm cov khoom siv hluav taws xob thiab tshuab

Kev siv tau

• Txhawb cov lus qhia suab thiab navigation
• Tactile nyees khawm
• Txhawb TTY/RTT
• Lub suab

Suab

• 90dB tso zis (0.5m, 1kHz)
• Dual microphone
• Echo tshem tawm thiab txo suab nrov

Zaub

• Brightness: 1000 nits
• ViewLub kaum sab xis: 176 degrees
• 7-nti kab pheeb ces kaum Corning® Gorilla® iav 3 npo
• Anti-reflective thiab anti-fingerprint txheej

Ib puag ncig

• Khoom siv: stainless hlau, iav fiber reinforced resin, thiab cuam tshuam iav
• Kub: Ua haujlwm / Cia -22 ° F txog 140 ° F (-30 ° C txog 60 ° C)
• Ua haujlwm av noo: 93% ntawm 89.6 ° F (32 ° C), tsis-condensing
• IP65 plua plav thiab dej tsis kam
• IK07 cuam tshuam tsis kam
• Haum rau kev teeb tsa sab hauv tsev thiab sab nraum zoov

Ua raws

US

• FCC Tshooj 15B / 15C / 15E / 24 / 27
• UAS 294
• UA 62368-1

Canada

• IC RSS-247/133/139/130
• TSI-003
• ULC 60839-11-1 Qib 1
• CSA 62368-1

PTCRB

Kev teeb tsa

Ua raws li cov kauj ruam no mus txuas ntxiv nrog kev teeb tsa.

1.

Teem lub cim nruab nrab ntawm lub phaj mounting thiab nruab nrab ntawm phab ntsa. Qib thiab cim qhov 1 thiab 2. Laum, thauj tog rau nkoj, thiab ntsia hlau rau hauv qhov chaw.

Nco tseg: Qhov 2 yog slotted rau kev kho.

2.

Nrhiav qhov nruab nrab ntawm 1.5 nti cable bore qhov siv cov cim raws li kev qhia. Tshem tawm lub phaj mounting ib ntus thiab xyaum qhov 1.5 nti qhov.

Laum thiab teeb cov thauj tog rau nkoj rau qhov seem 3-6. Reinstall lub phaj mounting.

3.

Tseem ceeb: Khaws cov ntaub thaiv npog rau.
Siv cov kev them nyiaj yug cable, khi lub Intercom rau lub phaj mounting kom yooj yim txuas.

Teem lub hnab tshos hauv lub bumper nrog qis mounting phaj tab. Muab lub voj ntawm kev txhawb nqa cable hla tus nuv.

4 ib a.

(A) Poj Niam RJ45

Koj tuaj yeem siv Ethernet cable los muab ob lub zog thiab internet rau lub cuab yeej. Los yog koj tuaj yeem siv cov xaim hluav taws xob ncaj qha nrog rau hauv Wi-nkaus lossis xov tooj ntawm tes.

(B) Txiv neej RJ45
(C) Connector Foob
(D) Split Gland
(E) Cable Seal

Kauj ruam 1: Pub B los ntawm C thiab E
Kauj ruam 2: Txuas B rau A
Kauj ruam 3: Txuas A rau C los ntawm kev sib tw. Ntxiv D tom qab C
Kauj ruam 4: Screw E rau hauv C

4 XNUMXb.

Yog tias koj tsis siv PoE, siv crimps los txuas rau lub zog ncaj qha.

Tseem ceeb: Xyuas kom cov cables qhuav thiab tsis muaj dej noo ua ntej txuas.

5.

Unhook lub cable txhawb nqa, tshem cov bumpers, thiab pub tag nrho cov xov hlau thiab cables los ntawm phab ntsa. Siv cov kab sib dhos hauv nruab nrab los nrhiav cov khoom. Muab lub Latch Intercom yaug nrog lub phaj mounting thiab xaub mus kom txog thaum tag nrho cov mounting tabs haum snugly.

                   

Tsis yog                    Yog lawm

Nco tseg: Peb pom zoo kom ua ib lub voj voj ntawm cov cables los pab kom tsis txhob ya raws cov hws ntawm kev sib txuas lossis khoom siv.

6.

Xauv rau hauv qhov chaw nrog TR20 kev ruaj ntseg ntsia hlau.

7.

Rub tawm Latch Manager App thiab teeb tsa.

Cov ntaub ntawv tuav tuav tseem ceeb

Kev ua haujlwm ib puag ncig
Kev ua haujlwm ntawm cov cuab yeej yuav raug cuam tshuam yog tias ua haujlwm sab nraum cov kab no:

Kev khiav hauj lwm thiab cia kub: -22 ° F txog 140 ° F (-30 ° C txog 60 ° C)
Relative Humidity: 0% txog 93% (tsis-condensing)

Ntxuav
Txawm hais tias lub cuab yeej yog dej tsis kam, tsis txhob siv dej los yog kua ncaj qha rau lub cuab yeej. Dampen ib daim ntaub mos los so sab nrauv ntawm lub cuab yeej. Tsis txhob siv cov kuab tshuaj los yog cov abrasives uas yuav ua rau lub cev puas tsuaj los yog ua kom tsis muaj xim.

Ntxuav lub vijtsam: Txawm hais tias lub cuab yeej tiv taus dej, tsis txhob siv dej lossis kua dej ncaj qha rau lub vijtsam. Dampen ib daim ntaub huv, mos, microfiber nrog dej thiab tom qab ntawd so lub vijtsam maj mam.

Ntxuav cov neeg hais lus mesh: Txhawm rau ntxuav cov khib nyiab ntawm cov lus mesh perforations, siv lub peev xwm ntawm cov cua compressed tuav 3 "los ntawm qhov chaw. Rau cov khoom uas tsis raug tshem tawm los ntawm huab cua compressed, cov neeg pleev kob daim kab xev tuaj yeem siv rau ntawm qhov chaw kom rub tawm cov khib nyiab.

Dej tsis kam
Txawm hais tias lub cuab yeej tiv taus dej, tsis txhob siv dej los yog kua rau lub cuab yeej, tshwj xeeb tshaj yog los ntawm lub tshuab ntxhua khaub ncaws los yog hose.

Sib nqus teb
Lub cuab yeej tuaj yeem ua rau cov hlau nplaum sib nqus nyob ze ntawm qhov chaw ntawm lub cuab yeej muaj zog txaus los cuam tshuam cov khoom xws li credit cards thiab cov xov xwm khaws cia.

Txoj Cai Ua Raws Cai

Tsoom Fwv Teb Chaws Kev Sib Txuas Lus Commission (FCC) Cov Lus Qhia Ua Raws Cai
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev khiav hauj lwm yog ua raws li ob qho xwm txheej hauv qab no: (1) Cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam tsis zoo, thiab (2) cov cuab yeej no yuav tsum lees txais kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis zoo.

CEEB TOOM: Cov kev hloov pauv lossis kev hloov kho tsis tau pom zoo los ntawm cov chaw tsim khoom lub luag haujlwm rau kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai ua haujlwm ntawm cov khoom siv.

CEEB TOOM: Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class B ntaus ntawv, ua raws li Tshooj 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim, siv thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab yog tias tsis tau nruab thiab siv raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj kev cuam tshuam tsis zoo rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov khoom siv thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

• Reorient los yog tshem tawm cov kav hlau txais xov.
• Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
• Txuas cov cuab yeej siv rau hauv qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
• Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

Lub transmitter no yuav tsum tsis txhob muab tso rau hauv los yog ua haujlwm ua ke nrog lwm tus kav hlau txais xov lossis cov khoom xa tawm.

Kev ua haujlwm hauv 5.15-5.25GHz band yog txwv rau kev siv sab hauv tsev nkaus xwb.

Cov cuab yeej no ua tau raws li tag nrho lwm cov kev cai uas tau teev tseg hauv Tshooj 15E, Tshooj 15.407 ntawm FCC Cov Cai.

Radiation Exposure Statement
Cov cuab yeej no ua raws li FCC cov kev txwv tsis pub muaj hluav taws xob tau teeb tsa rau qhov chaw tsis muaj kev tswj hwm. Cov cuab yeej no yuav tsum tau nruab thiab ua haujlwm nrog qhov deb tsawg kawg ntawm 20cm ntawm lub tshuab hluav taws xob thiab koj lub cev.

Kev Lag Luam Canada (IC) Daim Ntawv Qhia Ua Raws Cai
Cov cuab yeej no ua raws li ISED daim ntawv tso cai-tsim RSSs. Kev ua haujlwm yog ua raws li ob qho xwm txheej hauv qab no: (1) Cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam, thiab (2) cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam uas tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis zoo.

Cov cuab yeej siv rau kev ua haujlwm hauv band 5150 MHz tsuas yog siv rau sab hauv tsev kom txo qis cov peev txheej uas cuam tshuam kev cuam tshuam rau kev sib koom tes ntawm cov xov tooj cua xa hluav taws xob.

Radiation Exposure Statement
Cov cuab yeej no ua raws li ISED cov kev txwv hluav taws xob raug teeb tsa rau qhov chaw tsis muaj kev tswj hwm. Cov cuab yeej no yuav tsum tau nruab thiab ua haujlwm nrog ntau dua 20cm ntawm lub tshuab hluav taws xob thiab koj lub cev.

Yuav tsum tau ua raws li UL 294 7th Edition

Tshooj lus no muaj cov ntaub ntawv thiab cov lus qhia yuav tsum tau ua raws li UL. Txhawm rau kom paub tseeb tias lub installation yog raws li UL, ua raws li cov lus qhia hauv qab no ntxiv rau cov ntaub ntawv dav dav thiab cov lus qhia muab thoob plaws hauv daim ntawv no. Nyob rau hauv rooj plaub uas cov ntaub ntawv tsis sib haum xeeb, cov kev cai rau kev ua raws li UL ib txwm hloov cov ntaub ntawv thiab cov lus qhia.

Cov lus qhia kev nyab xeeb

• Cov khoom no yuav tsum tau nruab thiab muab kev pabcuam los ntawm cov kws tshaj lij uas muaj ntawv pov thawj nkaus xwb
• Cov chaw thiab cov txheej txheem xaim yuav tsum ua raws li National Electrical Code, ANSI/NFPA 70
• Rau kev sib txuas PoE, Kev teeb tsa yuav tsum tau ua raws li NFPA 70: Tshooj 725.121, Lub Zog Hluav Taws Xob rau Chav Kawm 2 thiab Chav Kawm 3 Circuits
• Tsis muaj qhov hloov pauv muaj rau cov khoom no
• Cov thawv hluav taws xob sab nraum zoov siv rau kev teeb tsa tau pom zoo ua NEMA 3 lossis zoo dua
• Kev rwb thaiv tsev kom raug yuav tsum tau siv thaum lub sijhawm teeb tsa kom tsis txhob muaj kev pheej hmoo ntawm hluav taws xob poob siab

Kev kuaj thiab kev ua haujlwm tu
Ua ntej installation, xyuas kom meej tias tag nrho cov xaim muaj kev ruaj ntseg. Txhua chav tsev yuav tsum tau kuaj xyuas txhua xyoo rau:

• Loosewiring & xoob screws
• Kev ua haujlwm li qub (sim hu rau tus neeg xauj tsev siv interface)

Kev ua haujlwm tsis zoo
Cov chav nyob yog tsim los ua haujlwm nyob rau hauv ib puag ncig tsis zoo.
Nyob rau hauv ib txwm muaj xwm txheej, lawv yuav ua haujlwm zoo txawm tias nyob sab nraud. Txawm li cas los xij, cov chav nyob tsis muaj lub zog thib ob thiab tsis tuaj yeem ua haujlwm yam tsis muaj lub zog txuas ncaj qha. Yog hais tias ib chav tsev raug puas tsuaj los ntawm tej yam ntuj tso los yog txhob txwm ua phem ua qias, nws yuav ua tsis tau zoo nyob ntawm theem ntawm kev puas tsuaj.

Configuration & Commissioning Instructions
Configuration & Commissioning cov lus qhia tuaj yeem pom nyob rau hauv kev nthuav dav ntxiv hauv Kev Kawm Txuj Ci Txuj Ci nrog rau kev txhawb nqa website ntawm support.latch.com.

Cov ntaub ntawv kev pabcuam
Cov Ntaub Ntawv Kev Pabcuam tuaj yeem pom nyob rau hauv cov ntsiab lus nthuav dav hauv Kev Kawm Txuj Ci Kev Kawm Txuj Ci nrog rau kev txhawb nqa website ntawm support.latch.com.

Cov khoom siv
Daim ntawv qhia kev teeb tsa no siv rau cov khoom lag luam nrog cov neeg tsim khoom hauv qab no ntawm daim ntawv lo:

• Qauv: INT1LFCNA1

Kev daws teeb meem
Yog tias Intercom tsis ua haujlwm:

• Xyuas kom lub intercom yog powered nrog DC fais fab. Tsis txhob siv lub zog AC.
• Xyuas kom cov input voltage yog siv 2 xaim nyob nruab nrab ntawm 12 thiab 24 volts DC nrog 50W +
• Xyuas kom cov tswv yim PoE Hom yog siv PoE yog 802.3bt 50W +
• Cov ntaub ntawv daws teeb meem ntxiv muaj nyob rau ntawm kev txhawb nqa website ntawm support.latch.com

Cov ntaub ntawv software

• Lub Latch Manager app yog tsim nyog los teeb tsa Latch Intercom
• Cov ntaub ntawv ntxiv txog kev teeb tsa tuaj yeem nrhiav tau ntawm kev txhawb nqa website ntawm support.latch.com
• Latch Intercom tau raug sim rau UL294 ua raws li kev ua haujlwm firmware version INT1.3.9
• Cov firmware tam sim no tuaj yeem kuaj xyuas los ntawm kev siv Latch Manager app

Yam khoom ua haujlwm

Qhov xwm txheej	Indication/Siv
Ib txwm standby	LCD ua kom pom cov duab tsis ua haujlwm
Kev nkag tau tso cai	Nkag mus rau qhov screen tshwm rau ntawm LCD
Kev nkag tsis tau	Qhov kev tshuaj ntsuam ua tsis tiav tso tawm ntawm LCD
keypad kev ua haujlwm	4 tactile nyees khawm yuav siv tau los mus rau lub LCD zaub
Rov qab pib dua	Rov pib dua tuaj yeem pom nyob rau sab nraub qaum ntawm lub cuab yeej kom rov pib lub kaw lus
Tampyog keyboards	Tamper keyboards tuaj yeem pom nyob rau sab nraub qaum ntawm lub cuab yeej kom pom kev tshem tawm ntawm txoj haujlwm mounting thiab tshem tawm ntawm lub nraub qaum

UL 294 Access Control Performance Ratings:

Feature Level Destructive Attack	Qib 1
Kab Security	Qib 1
Kev ua siab ntev	Qib 1
Standby Fais Fab	Qib 1
Tib Point Locking Ntaus nrog Cov Ntsiab Lus Xauv	Qib 1

Intercom Installation Guide

Version 1.2

Cov ntaub ntawv / Cov ntaub ntawv

LATCH Tsev Intercom System [ua pdf] Daim ntawv qhia kev teeb tsa Tsev Intercom System, Intercom System, System

Cov ntaub ntawv

• Cov neeg siv phau ntawv