R1
Cov neeg siv phau ntawv qhia
NPE 002119-01
Txog Tus Neeg Siv Phau Ntawv Qhia no
Phau ntawv qhia siv no siv rau RedNet R1. Nws muab cov ntaub ntawv hais txog kev teeb tsa thiab siv chav nyob, thiab nws tuaj yeem txuas nrog koj li cas.
Dante® thiab Audinate® tau sau npe ua lag luam ntawm Audinate Pty Ltd.
Cov ntsiab lus ntawm lub thawv
- RedNet R1 chav nyob
- Xauv DC fais fab mov
- Ethernet cable
- Cov ntaub ntawv kev nyab xeeb txiav daim ntawv
- Focusrite Pro Cov Lus Qhia Tseem Ceeb
- Daim Ntawv Teev Npe Khoom - thov ua raws cov lus qhia ntawm daim npav raws li nws muab txuas rau:
RedNet Tswj
RedNet PCIe cov tsav tsheb (suav nrog RedNet Tswj kev rub tawm)
Audinate Dante Controller (teeb tsa nrog RedNet Tswj)
Taw qhia
Ua tsaug rau kev yuav khoom Focusrite RedNet R1.
RedNet R1 yog lub khoos phis tawj saib xyuas lub cuab yeej thiab lub mloog pob ntseg tso tawm.
RedNet R1 tswj hwm Focusrite suab-dhau-IP cov cuab yeej xws li Liab 4Pre, Liab 8Pre, Liab 8Line, thiab Liab 16Line saib ntu.
RedNet R1 muaj lub peev xwm los tswj lub mic pres ntawm Red interfaces.
RedNet R1 nta ob ntu tseem ceeb: Cov peev txheej tawm tswv yim thiab saib xyuas cov txiaj ntsig.
Mus txog yim pab pawg ntau lub channel yuav raug xaiv saum toj thiab hauv qab ntawm lub vijtsam sab laug, txhua tus nrog khawm xaiv uas tso cai hloov kho qib thiab/lossis hloov pauv ntawm "nchuav" qhov chaw ntawm tus kheej.
Txhua qhov chaw muaj lub ntsuas cua uas qhia txog qib siab tshaj plaws hauv qhov chaw; kuj tseem muaj plaub txoj hauv kev tham tom ntej.
Siv ob lub built-in talkback mic lossis tom qab-vaj huam sib luag XLR cov tswv yim, tus neeg siv tuaj yeem qhia txuas nrog Red 4Pre, 8Pre, 8Line, lossis 16Line qhov twg los qhia cov teeb liab tham rov qab.
Ntawm sab xis ntawm chav tsev yog ntu Saib Xyuas Kev Tso Tawm. Ntawm no, tus neeg siv tuaj yeem Solo lossis Mute txhua tus ntawm tus neeg hais lus tawm mus txog rau 7.1.4 kev ua haujlwm. Ntau hom Solo muaj.
Lub lauj kaub txuas ntxiv nrog lub qhov loj aluminium pob qhov rooj muaj qib tswj rau cov txiaj ntsig, nrog rau kev txiav rau tus kheej saib/hais lus. Nyob ib sab ntawm no yog Mute, Dim, thiab Output Level Lock nyees khawm.
Kev teeb tsa ntawm RedNet R1 tau ua tiav siv RedNet Control 2 software.
REDNET R1 CONTROLS THIAB CONNECTIONS
Sab saum toj vaj huam sib luag
1 Cov Ntsiab Cai
Yim tus yuam sij xaiv tus ntaus ntawv hom kev ua haujlwm, rov nco lub submenus thiab nkag mus rau qhov chaw teeb tsa.
Saib phab 10 kom paub ntxiv.
- Lub mloog pob ntseg tso cai xaiv qhov chaw rau lub mloog pob ntseg hauv zos
- Saum hloov txoj kev xaiv rau ntau qhov chaw los ntawm kev rho tawm mus rau qhov suav sau; siv rau ob lub mloog pob ntseg thiab hais lus
- Txau tso cai rau qhov chaw nthuav dav los qhia nws tus kheej cov khoom sib xyaw
- Hom hloov tus qauv tam sim no ntawm lub cuab yeej. Cov kev xaiv yog: Saib, Mic Ua Ntej thiab Chaw Thoob Ntiaj Teb
- Ntshai tso cai rau tus hais lus nquag siv lub suab ntsiag to lossis tsis hais ib tus zuj zus
- Solo solos lossis un-solos tus neeg hais lus raws
- Cov zis nkag mus rau tus hais lus tso tawm teeb tsa cov ntawv qhia zaub mov
- A/B toggles ntawm ob qhov kev teeb tsa ua ntej tau teeb tsa ua ntej
2 Screen 1
TFT npo rau kev ua haujlwm yuam sij 1-4, nrog 12 lub pob muag muag rau kev tswj lub suab tawm tswv yim, xaiv tham rov qab, thiab teeb tsa lub cuab yeej. Saib nplooj 10.
3 Screen 2
TFT npo rau kev ua haujlwm yuam sij 5-8, nrog 12 lub pob muag muag rau kev tswj lub suab tawm thiab hais lus teeb tsa. Saib nplooj 12.
4 Built-In Talkback Mic
Lub suab tawm tswv yim rau cov lus sib tham. Xwb, lub mic sab nraud uas muaj peev xwm tuaj yeem txuas nrog lub vaj huam sib luag tom qab XLR. Saib nplooj 8.
Vaj Huam Sib Luag Sab saum toj. . .
5 Lub Pob Ntseg Pob Ntseg Qib
Tswj lub ntim ntim xa mus rau lub tso suab lub mloog pob ntseg ntawm lub vaj huam sib luag tom qab.
6 Lub mloog pob ntseg Mute Hloov
Lub latching hloov mutes lub suab mus rau lub mloog pob ntseg nkaus.
7 Cov Zis Tso Tawm Qib
Tswj lub ntim ntim xa mus rau cov saib pom. Thov xa mus rau Daim Ntawv Ntxiv 2 ntawm nplooj 22 rau cov ntaub ntawv ntxiv hais txog kev teeb tsa lub kaw lus ntim khoom.
Kuj tseem siv los kho qib ua ntej qhov tseem ceeb, nce chaw, thiab ci ntsa iab ntawm lub vijtsam.
8 Saib Xyuas Lub Suab Hloov
Lub latching hloov mutes lub suab mus rau lub monitor outputs.
9 Saib Dim Dim
Dims cov zis raws los ntawm tus nqi ua ntej.
Qhov teeb tsa pib yog 20dB. Txhawm rau nkag tus nqi tshiab:
- Nias-thiab-tuav Dim hloov mus txog rau Screen 2 qhia tus nqi tam sim no, tom qab ntawd tig lub Output Level Encoder
10 Preset Hloov
Tso cai rau saib xyuas qib tso tawm kom raug teeb tsa rau ib ntawm ob qhov kev txiav txim siab ua ntej.
Thaum Preset nquag siv qhov hloov pauv mus rau xim liab thiab Output Level Encoder raug txiav tawm kev tiv thaiv qib saib xyuas los ntawm kev hloov pauv yam tsis tau xav txog.
Mute thiab Dim keyboards tseem ua haujlwm zoo ib yam thaum Preset tau ua haujlwm.
Preset Hloov. . .
Txhawm rau khaws qib preset:
- Nias lub Preset hloov
- Screen 2 qhia txog qib tam sim no thiab cov txiaj ntsig khaws cia rau presets 1 & 2. N/A qhia tias tus nqi preset tsis tau khaws cia yav dhau los
- Tig lub Output Encoder kom tau txais qib tshiab uas xav tau
- Nias-thiab-tuav ob qho Preset 1 lossis Preset 2 rau ob vib nas this los muab tus nqi tshiab
Txhawm rau qhib tus nqi preset:
- Nias qhov xav tau khawm Preset
° Tus chij Preset yuav ci ntsa iab qhia tias tam sim no cov saib tau teeb tsa tus nqi ntawd
° Tus Xauv Tawm Tsam tus chij yuav ci ntsa iab los qhia tias Tus Txheej Txheem Tso Tawm Xauv raug kaw
° Preset hloov yuav hloov mus rau liab
Txhawm rau qhib lossis hloov ua ntej:
- Xauv los ntawm nias Xauv Tawm (mos-khawm 12) uas cuam tshuam rau Preset tab sis khaws cov qib tam sim no
Txhawm rau tawm ntawm cov ntawv qhia zaub mov xaiv ib qho ntawm cov hloov pauv tseem ceeb (Preset yuav coj koj rov qab mus rau nplooj ntawv dhau los).
Lub Vaj Huam Sib Luag
- Chaw Nres Nkoj / Lub Hwj Chim Tseem Ceeb Thawj*
RJ45 txuas rau Dante network. Siv tus qauv Cat 5e lossis Cat 6 network cable txuas RedNet R1 rau Ethernet network hloov.
Lub zog hla Ethernet (PoE) tuaj yeem siv los ua zog RedNet R1. Txuas qhov tsim nyog tsim nyog Ethernet qhov chaw. - Lub Hwj Huam Muaj Zog Thib Ob*
DC cov tswv yim nrog ntsuas phoo txuas rau siv qhov twg Power-over-Ethernet (PoE) tsis muaj.
Nws tuaj yeem siv ua ke nrog PoE.
Thaum ob qho khoom siv hluav taws xob muaj muaj PoE yuav yog qhov khoom siv tsis raug. - Hloov fais fab
- Footswitch tswv yim
1/4 "mono jack muab kev hloov pauv ntxiv. Txuas lub dav hlau txuas mus qhib. Qhov kev hloov pauv tau muab los ntawm RedNet Control Tools menu. Saib phab 20 - Talkback Mic Xaiv Hloov
Tus swb swb xaiv ib qho sab hauv lossis sab nraud mic raws li qhov hais lus rov qab. Xaiv Ext + 48V rau lub suab sab nraud uas xav tau + 48V phantom zog. - Talkback Tau Txais
Talkback ntim hloov pauv rau qhov xaiv mic. - Sab Nraud Talkback Mic Tswv Yim
Sib npaug XLR txuas rau sab nraud tham xov tooj cua mic. - Lub mloog pob ntseg
Txuj 1/4 "stereo jack rau lub mloog pob ntseg.
*Rau kev noj qab haus huv thiab kev nyab xeeb, thiab kom ntseeg tau tias qib tsis txaus ntshai, tsis txhob siv lub zog RedNet R1 thaum saib xyuas los ntawm lub mloog pob ntseg, lossis koj yuav hnov lub suab nrov "thump".
Xa mus rau Daim Ntawv Ntxiv ntawm nplooj 21 rau qhov txuas txuas.
Cov yam ntxwv ntawm lub cev
RedNet R1 qhov ntev (tsis suav nrog kev tswj hwm) tau piav qhia hauv daim duab saum toj no.
RedNet R1 hnyav 0.85 kg thiab tau nruab nrog cov roj hmab taw rau khoos phis tawj. Cua txias yog los ntawm ntuj convection.
Nco tseg. Qhov ua haujlwm siab tshaj plaws ib puag ncig kub yog 40 ° C / 104 ° F.
Kev xav tau lub zog
RedNet R1 tuaj yeem siv hluav taws xob los ntawm ob qhov sib cais: Lub zog-dhau-Ethernet (PoE) lossis DC cov tswv yim los ntawm cov khoom siv hluav taws xob sab nraud.
Cov txheej txheem PoE xav tau yog 37.0–57.0 V @ 1–2 A (kwv yees.) - raws li muab los ntawm ntau qhov tsim nyog hloov pauv hloov pauv thiab sab nraud PoE cov tshuaj.
PoE injectors siv yuav tsum muaj peev xwm Gigabit.
Txhawm rau siv 12V DC cov tswv yim, txuas lub ntsaws sab nraud sab saum toj PSU muab rau lub qhov hluav taws xob uas nyob ib sab.
Tsuas yog siv DC PSU muab nrog RedNet R1. Kev siv lwm cov khoom siv sab nraud tuaj yeem cuam tshuam rau kev ua haujlwm lossis tuaj yeem ua rau lub tsev puas tsuaj.
Thaum ob qho tib si PoE thiab cov khoom siv DC sab nraud txuas nrog, PoE dhau los ua qhov khoom siv tsis raug.
Lub zog siv hluav taws xob ntawm RedNet R1 yog: DC khoom siv: 9.0 W, PoE: 10.3 W
Thov nco ntsoov tias tsis muaj fuses hauv RedNet R1 lossis lwm yam khoom siv hloov pauv tau ntawm txhua hom.
Thov xa tag nrho cov teeb meem kev pabcuam mus rau Pab Pawg Txhawb Nqa Cov Neeg Siv khoom (saib "Kev Pabcuam Cov Neeg Siv Khoom thiab Kev Pabcuam" ntawm nplooj 24).
REDNET R1 kev ua haujlwm
Thawj zaug Siv thiab Hloov Kho Firmware
Koj RedNet R1 yuav xav tau kev hloov kho tshiab* thaum nws tau teeb tsa thawj zaug thiab hloov mus. Kev hloov kho tshiab tau pib thiab ua tiav los ntawm RedNet Control daim ntawv thov.
*Nws yog ib qho tseem ceeb uas cov txheej txheem hloov kho tshiab tsis cuam tshuam - txawm yog hloov lub zog rau RedNet R1 lossis lub khoos phis tawj uas RedNet Tswj tau ua haujlwm, lossis los ntawm kev sib txuas los ntawm lub network.
Txij lub sijhawm dhau los Focusrite yuav tso tawm cov software hloov tshiab tsis pub dhau tshiab ntawm RedNet Control.
Peb pom zoo kom khaws txhua chav nyob nrog hnub kawg nrog cov khoos phis tawj tshiab tshaj plaws muab nrog txhua qhov tshiab ntawm RedNet Control.
Daim ntawv thov RedNet Tswj yuav cia li qhia rau tus neeg siv yog tias muaj kev hloov kho tshiab muaj.
Function Keys
Yim txoj haujlwm tseem ceeb xaiv tus qauv ua haujlwm ntawm lub cuab yeej.
Cov xim hloov pauv qhia nws cov xwm txheej: tsis pom kev pom tias qhov hloov pauv tsis tuaj yeem xaiv; dawb
qhia tau tias qhov hloov pauv tau xaiv tau, lwm yam xim qhia tau tias qhov hloov pauv tau ua haujlwm.
Cov vijtsam 1 & 2 hauv qab txhua pab pawg ntawm plaub lub nyees khawm tso saib cov kev xaiv & submenus muaj rau txhua txoj haujlwm. Cov kev xaiv raug xaiv siv kaum ob lub pob mos muag muab rau txhua lub vijtsam.
Lub mloog pob ntseg
Hloov pauv qhov kev xaiv nkag los ntawm Tus Hais Lus/Tus Saib Xyuas rau Lub Pob Ntseg. Lub pob yuav teeb lub txiv kab ntxwv thaum xaiv lub mloog pob ntseg.
- Siv cov nyees khawm muag 1-4 thiab 7–10 los xaiv cov khoom siv (s). Saib qhov 'Sum' qhov tseem ceeb hauv qab no.
- Txhawm rau kho qib ntawm tus kheej qhov chaw Xovxwm-thiab-tuav lub pob thiab tom qab ntawd tig lub Output Encoder
- Cov channel tsis meej tau qhia nrog liab 'M'. Saib Spill ntawm nplooj ntawv tom ntej
- Txhawm rau qhib talkback:
° Siv cov nyees khawm 5, 6, 11 lossis 12 txhawm rau pab tham rov qab mus rau qhov chaw qhia
° Khawm ua haujlwm tuaj yeem yog xauv lossis nrawm. Saib Cov Chaw Thoob Ntiaj Teb ntawm nplooj 12.
Saum
Toggles Qhov Chaw Xaiv Pawg xaiv txoj hauv kev sib cuam tshuam (ib leeg) thiab suav nrog.
Los ntawm kev xaiv 'Summing tus cwj pwm' hauv Cov Cuab Yeej ntawv qhia zaub mov, qib tso tawm yuav raug kho kom tswj tau qhov ntim tas li raws li cov ntsiab lus tau muab ntxiv lossis tshem tawm. Saib phab 19.
Txau
Nthuav qhov peev txheej los qhia nws cov kev sib koom ua ke tso cai rau lawv kom ntsiag to/tsis-ntsiag to ib leeg zuj zus:
- Xaiv qhov chaw kom nchuav
- Vijtsam 1 yuav tso saib (txog) 12 tshooj uas muaj nyob hauv qhov chaw ntawd:
° Siv cov nyees khawm kom ntsiag to/tsis hais lus raws.
° Mloog raws tau qhia nrog liab 'M'
Hom
Xaiv cov 'Saib', 'Mic Pre' lossis 'Settings' submenus:
Saib xyuas - Nkag mus rau tus hais lus tam sim no/saib lossis lub mloog pob ntseg xaiv.
Mic Ua Ntej - Nkag mus rau kev tswj hwm kho vajtse ntawm cov cuab yeej nyob deb.
- Siv cov nyees khawm muag 1-4 lossis 7-10 los xaiv lub cuab yeej nyob deb los tswj.
Tom qab ntawd siv:
° Khawm 1-3 thiab 7-9 los tswj cov cuab yeej ntsuas
° Khawm 5,6,11 & 12 kom muaj peev xwm tham tau rov qab
- 'Tawm' tso cai thoob ntiaj teb cov qib tso tawm kom raug kho yam tsis tas yuav hloov hom:
° Xaiv lub pob nyem 12 thiab tig lub Output Encoder los kho lub ntiaj teb
° Tsis xaiv kom rov qab mus rau Mic Pre mode
- 'Gain Preset' muab rau rau qhov chaw uas tus nqi nce tau tuaj yeem khaws cia. Tus nqi khaws cia tuaj yeem siv rau cov channel xaiv tam sim no los ntawm nias lub pob Preset uas tsim nyog
Txhawm rau muab tus nqi preset:
° Xaiv lub Preset khawm thiab tig lub Output Encoder rau qib uas xav tau
° Nias-thiab-tuav lub pob rau ob vib nas this los muab tus nqi tshiab
° Nias 'Mic Pre Settings' kom rov qab mus rau mic ntsuas qhov ntsuas
Chaw - Nkag mus rau Lub Ntiaj Teb Chaw submenu:
- Talkback Latch - Toggles qhov kev txiav txim ntawm cov lus tham hauv nruab nrab ntawm ib pliag thiab latching
- Auto Standby - Thaum ua haujlwm, yuav ua rau TFT cov ntxaij vab tshaus tawm tom qab 5 feeb ntawm qhov tsis ua haujlwm, piv txwv li.
Lub kaw lus tuaj yeem tsim los ntawm nias ib qho hloov lossis txav ib qho Encoder
Nco ntsoov tias, txhawm rau tiv thaiv kev hloov pauv yam tsis tau xav txog, thawj zaug hloov xovxwm lossis lub zog txav mus los yuav tsis muaj kev cuam tshuam dab tsi ntxiv rau kom ua rau lub cev muaj zog. Txawm li cas los…
Mute thiab Dim cov nyees khawm yog qhov tshwj xeeb thiab tseem ua haujlwm, yog li nias ib qho yuav ua rau lub ntsej muag qhib
kaw lus thiab kaw/dim lub suab. - Brightness - Tig lub Output Encoder los kho qhov ci ci ntawm lub vijtsam
- Cov xwm txheej ntawm lub cuab yeej - Qhia cov cuab yeej, software, thiab teeb tsa network ntawm lub cuab yeej thiab lub cuab yeej tswj hwm (DUC)
Ntshai
Siv cov nyees khawm muag muag kom tsis txhob hais lus nrov nrov. Cov channel tsis meej tau qhia nrog liab 'M'.
Solo
Siv cov nyees khawm mos muag rau ib leeg lossis tsis yog-tus kheej lub suab nrov nrov
cov channel.
- Ib qho 'S' qhia tias Solo xwm txheej tau ua haujlwm thaum nyob hauv Hom Ntiag Tug.
- Kev xaiv hom ib leeg tau teeb tsa los ntawm Cov Ntawv Qhia Tawm, saib hauv qab no.
Cov zis
Tso cai xaiv ntawm cov channel tso zis hom, ntxiv rau hom kev ua haujlwm rau Solo khawm.
- Plaub qhov qhib, rau Cov Lus Qhia 1, 2, 3 & 4, tau teeb tsa hauv RedNet Control, saib nplooj 15
- Xauv Tawm
Luam theej tawm ntawm Preset hloov (nplooj 6 & 7) - Solo Sum / Intercancel
- Solo nyob rau hauv qhov chaw
Solos xaiv tus hais lus (s) thiab ntsiag to tag nrho lwm tus - Solo pem hauv ntej/
Solos xaiv tus hais lus (s) thiab dim tag nrho lwm tus
Solo rau pem hauv ntej
Xa lub suab los ntawm tus neeg hais lus xaiv tus kheej mus rau tus hais lus sib txawv
A/B
Tso cai sib piv nrawm ntawm ob tus neeg hais lus sib txawv teeb tsa. A thiab B teeb tsa tau teeb tsa los ntawm RedNet Control Monitor Outputs menu. Saib phab 15.
REDNET Tswj 2
RedNet Control 2 yog Focusrite qhov kev tsim kho software thov rau kev tswj hwm thiab teeb tsa RedNet, Liab, thiab ISA ntau ntawm kev cuam tshuam. Cov duab sawv cev rau txhua lub cuab yeej qhia pom kev tswj hwm, teeb tsa kev ua haujlwm, ntsuas lub teeb liab, teeb tsa lub teeb liab, thiab sib xyaw - ntxiv rau muab cov xwm txheej ntsuas rau cov khoom siv fais fab, moos, thiab thawj zaug/theem nrab kev sib txuas network.
REDNET R1 GUI
Cov duab teeb tsa rau RedNet R1 tau muab cais ua tsib nplooj ntawv:
• Pawg Pawg Tau Txais • Tham rov qab
• Saib Xyuas Cov Ntawv Tso Tawm • Cue Sib xyaw
• Channel Kav
Xaiv Ib Leeg Ntaus los Tswj
Siv qhov nco-down hauv kab ntawv ntawm txhua nplooj ntawv GUI los xaiv lub cuab yeej
Pawg Pawg
Pawg Pab Pawg nplooj ntawv tau siv los teeb tsa rau yim pab pawg nkag thiab muab lub suab los rau txhua qhov channel nkag.
Tawm tswv yim Channel Configuration
Nyem qhov drop-down 
hauv qab txhua qhov Source Group khawm
los muab nws cov channel teeb tsa.
Muaj ob txoj kev xaiv:
- Presets - Xaiv los ntawm cov npe ntawm cov channel teeb tsa ua ntej:
| -Mono —5.1.2 - Lub tso suab —5.1.4 - LCR ua |
—7.1.2 —5.1 —7.1.4 —7.1 |
Kev npaj ua ntej tso cai rau tus neeg siv teeb tsa Pawg Pab Pawg (thiab Saib Xyuas Cov Ntawv Tso Tawm) nplooj ntawv yam tsis tas yuav tsum tau nkag mus rau tus kheej hla-cov ntsiab lus ntawm nplooj ntawv 'Channel Mapping'.
Cov ntawv teev tseg presets pib sau cov lus qhia ua ke nrog cov txheej txheem ua ntej thiab sib xyaw coefficients kom txhua qhov quav-quav thiab quav-nqes tau ua tiav tas li, piv txwv li.
- Kev cai - Tso cai rau tus kheej lub npe tawm tswv yim thiab kev teeb tsa kab lus teeb tsa ntawm lub rooj.
Input Source Xaiv
Lub suab qhov chaw muab rau txhua channel hauv pab pawg tau xaiv siv nws qhov nco-down:
Cov npe ntawm cov peev txheej muaj yuav nyob ntawm cov cuab yeej raug tswj:
-Kev sib piv 1-8/16 Cov cuab yeej liab-nyob ntawm
ADAT 1-16
S/PDIF 1-2
Dante 1-32: kuv
Playback (DAW) 1-64
- Cov channel tuaj yeem hloov pauv tau los ntawm ob-nias ntawm lawv lub npe tam sim no.
Saib xyuas cov zis
Nplooj Ntawv Saib Xyuas Cov Khoom Siv tau siv los teeb tsa cov pab pawg tso tawm thiab muab lub suab tso tawm.
Xaiv Hom Kev Tso Tawm
Nyem rau txhua qhov nco-down
los muab nws cov qauv teeb tsa:
| - Mono - Lub tso suab - LCR ua —5.1 —7.1 |
—5.1.2 —5.1.4 —7.1.2 —7.1.4 - Kev cai (1 - 12 raws) |
Xaiv Qhov Chaw Xaiv Qhov Chaw
Lub hom phiaj suab rau txhua cov channel tau muab siv nws qhov nco-down:
| -Kev sib piv 1-8/16-ADAT 1-16 S/PDIF 1-2 |
-Rov qab 1-2 Dante 1-32: kuv |
- Cov channel tuaj yeem hloov pauv tau los ntawm ob-nias rau ntawm lawv tus lej channel tam sim no
- Cov kev tso tawm raws xaiv rau Cov Qauv Tawm Tsam 1-4 tseem nyob ruaj khov thoob plaws txhua qhov Chaw Tawm Tswv Yim
Cov pab pawg, txawm li cas los xij, kev hloov pauv thiab qib tuaj yeem hloov kho. Saib 'Channel Mapping' ntawm nplooj ntawv tom ntej
A/B Hloov Kho
Xaiv qhov tso tawm rau 'A' (xiav) thiab 'B' (txiv kab ntxwv) txhawm rau muab lwm hom Kev Tso Tawm rau sab pem hauv ntej A/B Hloov. Qhov hloov xim yuav toggle (xiav/txiv kab ntxwv) los qhia qhov tam sim no xaiv qhov tso tawm Qhov hloov pauv yuav ci ntsa iab dawb yog tias A/B teeb tau teeb tsa tab sis tam sim no tus neeg hais lus xaiv tsis yog A lossis B. Hloov yuav dim yog A/B muaj tsis tau teeb tsa.
Ua Cov Ntej Channel
Channel Mapping nplooj ntawv qhia kab lus hla kab lus rau txhua qhov Chaw Pab Pawg/Cov Lus Taw Qhia Lub Hom Phiaj xaiv. Cov ntsiab lus hla tus kheej tuaj yeem xaiv/tsis xaiv lossis qib txiav.
- Tus naj npawb ntawm kab uas pom tso tawm sib haum rau tus lej ntawm cov channel hauv txhua Pawg Pawg
- Ib Qhov Chaw Nkag Nkag tuaj yeem raug xa mus rau ntau qhov Outputs, los pab tsim cov quav-quav lossis quav-nqes
- Txhua kab sib chaws hla taw tes tuaj yeem txiav los ntawm kev nyem thiab nkag tus nqi ntawm cov keyboard
- Lub Solo-To-Front lub suab nrov tuaj yeem raug xa mus rau tsuas yog ib Lub Chaw Tso Tawm
Ntxiv cov channel (1-12) rau cov channel uas twb muaj lawm hauv qhov chaw yog tsis muaj kev puas tsuaj thiab yuav tsis hloov pauv txoj kev. Txawm li cas los xij, yog tias tus neeg siv hloov pauv los ntawm 12 channel Source Group mus rau 10 channel Source Group, tom qab ntawd cov sib xyaw sib xyaw rau cov channel 11 thiab 12 yuav raug tshem tawm - xav kom lawv teeb tsa dua yog tias cov channel tau rov ua haujlwm tom qab.
Raws Li Tseem Nyob Hauv Tov Khoom
Muaj ntau kawg ntawm 32 raws. Tus naj npawb ntawm cov seem uas seem tau qhia nyob rau sab saud Cov pab pawg khawm.
Talkback Channels tej zaum yuav raug muab faib rov qab los tso cai rau pab pawg ntxiv.
Tham rov qab
Nplooj ntawv Talkback qhia txog kev teeb tsa ntawm kab lus hla kab lus rau kev xaiv tawm suab tawm suab thiab lub mloog pob ntseg teeb tsa.
Talkback Txoj Kev
Cov kab lus hla kev tso cai rau tus neeg siv taug txoj hauv kev Talkback channel mus rau 16 qhov chaw; hom hom phiaj yog qhia saum toj saud.
Talkback 1–4 tseem tuaj yeem xa mus rau Cue sib tov 1–8.
Talkback Channels tuaj yeem hloov pauv.
Talkback Teeb
Tham rov qab piav qhia thiab lub cim yuav tso saib raws li ntsuab thaum txuas nrog rau Red device raws li xav tau.
Daj '!' qhia tias txoj kev khiav tam sim no tab sis tsis muaj lub suab tso cai ntws, xa mus rau Dante Controller kom paub meej Nyem rau ntawm lub cim cia li hloov kho txoj kev. Nyem rau sau tus nqi hauv dB.
Lub mloog pob ntseg teeb
Lub Pob Ntseg Lub Pob Ntseg tseem yuav tso saib ua zuam ntsuab thaum txuas nrog rau Red device raws li xav tau.
Daj '!' qhia tias txoj kev khiav tam sim no tab sis tsis muaj lub suab tso cai ntws, xa mus rau Dante Controller kom paub meej
Cue Sib tov
Nplooj ntawv Cue Mixes qhia txog lub hauv paus, kev hloov pauv, thiab qib teeb tsa rau txhua ntawm yim qhov kev sib xyaw ua ke.
Kev xaiv cov khoom sib xyaw yog pom saum toj no cov npe ntawm cov peev txheej muaj. Siv CMD+'nyem'. los xaiv ntau Lub Hom Phiaj Tawm.
Txog 30 qhov chaw tuaj yeem xaiv ua cov khoom sib tov.
ID (Qhia kom paub)
Nyem rau ntawm daim npav ID
yuav txheeb xyuas lub cev lub cev raug tswj los ntawm kev ua kom pom nws lub vaj huam sib luag pem hauv ntej hloov LEDs rau lub sijhawm 10s.
Lub xeev tus ID tuaj yeem raug tshem tawm los ntawm kev nias ib qho ntawm lub vaj huam sib luag pem hauv ntej hloov pauv thaum lub sijhawm thib ob thib ob. Ib zaug tso tseg, cov hloov pauv rov qab mus rau lawv cov haujlwm ib txwm muaj.
Nyem rau ntawm Cov cuab yeej icon
yuav coj mus rau Qhov System Settings window. Cov cuab yeej raug faib ua ob kab tab, 'Ntaus Ntawv' thiab 'Footswitch':
Ntaus:
Xib Hwb Xib Hwb - On/Off lub xeev.
Talkback Txoj Kev - Xaiv cov channel ntawm Red device los siv ua lub ncauj lus tham.
Lub mloog pob ntseg - Xaiv cov channel khub ntawm Red device los siv ua lub mloog pob ntseg.
Summing Cwj pwm - Hloov kho qib tso tawm kom tswj tau qhov ntim tas li raws li cov ntaub ntawv suav sau tau ntxiv lossis tshem tawm. Tsis tas li, saib Cov Ntawv Ntxiv 2 ntawm nplooj 22.
Lwm Yam Xim Xim - Hloov Screen 1 & 2 qib qhia los ntawm ntsuab/daj/liab mus rau xiav.
Attenuation (Lub mloog pob ntseg) - Lub mloog pob ntseg tso zis ntim tau tuaj yeem ua kom haum rau lub mloog pob ntseg sib txawv
Ntawv qhia zaub mov. . .
Footswitch:
Txoj hauj lwm - Xaiv qhov ua ntawm footswitch input. Xaiv ib qho:
- Cov lus sib tham (s) kom qhib, lossis…
- saib xyuas cov channel (s) kom raug ntsiag to
COV TXHEEJ TXHEEM
Txuas Pinouts
Network (PoE)
Hom txuas: RJ-45 lub qhov rooj
| Pin | Cat 6 Tub Ntxhais | PoE A. | PoB B. |
| 1 2 3 4 5 6 7 8 |
Dawb + Txiv kab ntxwv Txiv kab ntxwv Dawb + Ntsuab Xiav Dawb + Xiav Ntsuab Dawb + Xim av Xim av |
DC + DC + DC- DC- |
DC + DC + DC- DC- |
Tham rov qab
Hom txuas: XLR-3 poj niam
| Pin | Teeb liab |
| 1 2 3 |
Screen Kub (+ve) Mob khaub thuas |
Lub mloog pob ntseg
Hom txuas: Lub tso suab 1/4 "jack socket
| Pin | Teeb liab |
| Tswv yim Nplhaib Lub tes tsho |
Txoj cai O/P. Sab laug O/P. Hauv av |
Npaus Suav
Hom txuas: Mono 1/4 "jack socket
| Pin | Teeb liab |
| Tswv yim Lub tes tsho |
Ua I/P. Hauv av |
Cov Ntaub Ntawv Qib I/O
Ob qho R1 thiab Red ntau yam khoom siv nyob rau hauv kev tswj hwm tuaj yeem hloov kho lub suab nrov nrov txuas nrog rau Red device cov lus sib piv.
Muaj ob qhov chaw tswj hwm ntawm lub kaw lus saib xyuas tuaj yeem ua rau muaj qhov tsis txaus lossis qhov nkag siab siab ntawm R1's Output Level encoder. Txhawm rau zam qhov ua tau, peb yuav qhia siv cov txheej txheem teeb tsa lub suab nrov hauv qab no:
Teem Cov Qib Siab Tshaj Plaws
- Teem tag nrho cov txiaj ntsig sib piv ntawm Chav Liab ntau rau qib qis (tab sis tsis ntsiag to), siv ob sab ua ntej tswj hwm los ntawm RedNet Control
- Tig lub ntim ntim ntawm R1 kom siab tshaj
- Playa cov teeb liab xeem/dhau los ntawm kab ke
- Maj mam nce cov channel tag nrho ntawm Chav Liab kom txog thaum koj mus txog qib siab tshaj plaws uas koj xav tau los ntawm koj tus hais lus/lub mloog pob ntseg
- Siv lub ntim thiab/lossis Dim kev tswj ntawm R1 kom txo los ntawm qib no. Tam sim no txuas ntxiv siv R1 ua tus saib xyuas lub ntim ntim khoom.
Cov txheej txheem tsuas yog tsim nyog rau cov txiaj ntsig sib piv (cov txiaj ntsig digital tau cuam tshuam tsuas yog los ntawm R1 qib kev tswj hwm).
Qib Tswj Cov Ntsiab Lus
| Tswj qhov chaw | Tswj nyhuv | Ntsuas |
| Liab Pem Hauv Ntej Vaj Huam Sib Luag | Kev kho lub vaj huam sib luag pem hauv ntej Saib Qib Encoder yuav cuam tshuam rau qib uas R1 tuaj yeem tswj hwm ntawm cov khoom sib piv uas txuas nrog rau tus lej ntawd | Liab: Tom qab ploj R1: Ua ntej ploj |
| Liab Software | Kev kho cov txiaj ntsig analog yuav cuam tshuam rau qib uas R1 tuaj yeem tswj hwm ntawm cov khoom sib piv uas txuas nrog rau tus lej ntawd. | Liab: Tom qab ploj R1: Ua ntej ploj |
| R1 Pem Hauv Ntej Vaj Huam Sib Luag | Cov neeg siv tuaj yeem txiav tag nrho Pawg Pawg los ntawm -127dB Nias-thiab-tuav lub hauv paus Pawg xaiv khawm thiab kho qhov Output Encoder Cov neeg siv tuaj yeem txiav tus kheej Cov Kev Nkag Mus Los raws los ntawm -12dB Xovxwm-thiab-tuav lub qhov chaw tso tawm khawm khawm thiab kho qhov Output Encoder Cov neeg siv tuaj yeem txiav tag nrho cov qib tso tawm los ntawm -127dB Nias-thiab-tuav ib qho Output Channel khawm thiab kho qhov Output Encoder Cov neeg siv tuaj yeem txiav tus neeg hais lus los ntawm -127dB Nias-thiab-tuav tus hais lus/saib xyuas khawm xaiv thiab kho qhov Output Encoder |
R1: Ua ntej fade R1: Ua ntej fade R1: Tom qab fade R1: Tom qab fade |
| R1 Software | Cov neeg siv tuaj yeem txiav cov qib hla kev hla mus txog 6dB (hauv 1dB cov kauj ruam) los ntawm Txoj Kev Nplooj ntawv rau kev hloov me me | R1: Ua ntej ploj |
Qib Summing
Thaum Summing tus cwj pwm tau qhib rau hauv Cov Cuab Yeej ntawv qhia zaub mov, nws cia li hloov kho qib tso tawm kom tswj tau qhov tso tawm tas mus li thaum cov peev txheej tau ntxiv lossis tshem tawm.
Theem ntawm kev hloov kho yog 20 lub cav (1/n), piv txwv li, kwv yees li 6dB, rau txhua qhov chaw suav nrog.
PERFORMANCE THIAB SPECIFICATIONS
| Lub mloog pob ntseg tso zis | |
| Txhua qhov kev ntsuas ntsuas ntawm + I 9dBm qib siv, nce siab tshaj, R, = 60052 | |
| 0 dBFS Siv Qib | +19 dBm, ± 0.3 dB |
| Zaus teb | 20 Hz - 20 kHz ± 0.2 dB |
| THD + N | -104 dB (<0.0006%) ntawm -1 dBFS |
| Dynamic Range | 119 dB A'-weighted (raug), 20 Hz-20 kHz |
| Cov zis impedance | 50 |
| Lub mloog pob ntseg impedance | 320–6000 : kuv |
| Kev Ua Tau Zoo | |
| Txhawb nqa sample cov | 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1%) |
| Moos Xaim | Sab hauv lossis los ntawm Dante Network Master |
| Kev sib txuas | |
| Lub Vaj Huam Sib Luag | |
| Lub mloog pob ntseg | 1/4 "lub tso suab tso suab Jack |
| Npaus Suav | 1/4 "mono Jack qhov (socket) |
| Network | RJ45 connector |
| PSU (PoE thiab DC) | 1 x PoE (Network Port 1) Cov tswv yim thiab 1 x DC 12V Kev Xauv Lub Nkev Nkag Nkag Txuas |
| Qhov ntev | |
| Qhov siab (Tsuas yog Chassis) | 47.5 hli / 1.87 " |
| Dav | 140 hli / 5.51 " |
| Qhov tob (Chassis Xwb) | 104 hli / 4.09- |
| Qhov hnyav | |
| Qhov hnyav | 1.04kg ib |
| Hwj chim | |
| Fais fab dhau Ethernet (PoE) | Ua tiav nrog IEEE 802.3af chav kawm 0 Lub zog-dhau-Ethernet tus qauv PoE A lossis PoE B tau tshaj. |
| DC fais fab mov | 1 x 12 V 1.2 A DC fais fab mov |
| Kev noj haus | PoE: 10.3 W; DC: 9 W thaum siv cov khoom siv DC PSU |
Focusrite Pro Warranty thiab Kev Pabcuam
Txhua yam khoom Focusrite tau tsim rau cov qauv siab tshaj plaws thiab yuav tsum muab kev ntseeg tau zoo rau ntau xyoo, raug saib xyuas kom tsim nyog, siv, thauj mus los, thiab khaws cia.
Ntau ntau ntawm cov khoom xa rov qab raws li kev lees paub pom tias tsis muaj qhov ua txhaum txhua. Txhawm rau zam qhov tsis yooj yim tsis yooj yim rau koj hais txog kev xa cov khoom thov hu rau Focusrite txhawb nqa.
Nyob rau hauv qhov xwm txheej ntawm Kev Tsim Kho Tsis Zoo ua pov thawj hauv cov khoom lag luam tsis pub dhau 3 xyoos txij li hnub ntawm kev yuav khoom thawj Focusrite yuav ua kom ntseeg tau tias cov khoom raug kho lossis hloov dawb, thov mus saib: https://focusrite.com/en/warranty
Kev Tsim Txom Tsis Txaus Siab tau txhais tias yog qhov ua tsis tau zoo ntawm cov khoom lag luam raws li tau piav qhia thiab tshaj tawm los ntawm Focusrite. Kev Tsim Txom Tsis Txaus suav nrog kev puas tsuaj tshwm sim los ntawm kev thauj mus los tom qab yuav khoom, khaws cia lossis tsis saib xyuas, lossis tsis ua rau puas los ntawm kev siv tsis raug.
Txawm hais tias qhov kev lees paub no yog muab los ntawm Focusrite qhov kev lav paub tau ua tiav los ntawm tus xa khoom lub luag haujlwm rau lub tebchaws uas koj yuav khoom.
Yog tias koj xav tau hu rau tus neeg muag khoom hais txog qhov teeb meem kev lees paub, lossis kev them nqi-tawm-kev tiv thaiv them nqi kho mob, thov mus ntsib: www.focusrite.com/distributors cov
Tus xa khoom yuav qhia koj txog cov txheej txheem tsim nyog los daws qhov teeb meem kev lees paub.
Hauv txhua qhov xwm txheej nws yuav tsim nyog muab daim ntawv theej ntawm daim npav rho nyiaj thawj zaug lossis daim ntawv txais nyiaj khaws cia rau tus xa khoom. Hauv qhov xwm txheej uas koj tsis tuaj yeem muab pov thawj ntawm kev yuav khoom ncaj qha ces koj yuav tsum hu rau tus muag khoom los ntawm qhov koj tau yuav cov khoom lag luam thiab sim nrhiav pov thawj ntawm kev yuav khoom los ntawm lawv.
Thov nco ntsoov tias yog tias koj yuav cov khoom Focusrite sab nraum koj lub tebchaws lossis chaw lag luam koj yuav tsis muaj cai nug koj tus neeg xa khoom hauv Focusrite hauv cheeb tsam kom hwm qhov kev lav paub no, txawm hais tias koj tuaj yeem thov kom tsis them nqi kho.
Qhov kev lav phib xaub no tsuas yog muab rau cov khoom yuav los ntawm Tus Kws Tso Cai Tso Cai Muag Khoom (txhais tias yog tus muag khoom uas tau yuav cov khoom ncaj qha los ntawm Focusrite Audio Engineering Limited hauv tebchaws Askiv, lossis ib qho ntawm nws Cov Ntawv Tso Cai Muag Khoom Sab Nraud UK). Qhov kev lees paub no yog ntxiv rau koj txoj cai lij choj hauv lub tebchaws uas yuav khoom.
Sau npe rau koj cov khoom
Txhawm rau nkag mus rau Dante Virtual Soundcard, thov sau koj cov khoom ntawm: www.focusrite.com/ sau npe
Kev Txhawb Nqa Cov Neeg Siv Khoom thiab Kev Pabcuam Hauv Tsev
Koj tuaj yeem tiv tauj peb pab pawg RedNet Pab Txhawb Cov Neeg Siv Khoom dawb dawb:
Email: proaudiosupport@focusrite.com
Xov tooj (UK): +44 (0) 1494 836384
Xov tooj (USA): +1 310-450-8494 Ib
Kev daws teeb meem
Yog tias koj tab tom ntsib teeb meem nrog koj RedNet R1, peb pom zoo tias hauv thawj kis, koj mus ntsib peb Cov Lus Teb Txhawb Nqa ntawm: www.focusrite.com/answerbase
Cov ntaub ntawv / Cov ntaub ntawv
 |
Focusrite Liab Net R1 Desktop Chaw Taws Teeb Tswj [ua pdf] Cov neeg siv phau ntawv qhia Red Net R1 Desktop Remote Controller |
