S3MT-60KWR480V S3MT-Series 3-Phase
Input and Output Transformers
Littafin Mai shiModels: S3MT-30KWR480V, S3MT-60KWR480V

GARANTIN GASKIYA
Yi rijista samfurin ku a yau kuma za a shigar da shi ta atomatik don cin nasara mai karewa na ISOBAR® a cikin zanenmu na wata-wata! tripplite.com/warranty

http://www.tripplite.com/warranty1111 W. 35th Street, Chicago, IL 60609 Amurka • tripplite.com/support
Haƙƙin mallaka © 2021 Tripp Lite. An kiyaye duk haƙƙoƙi.

Gabatarwa

Tripp Lite's S3MT-30KWR480V da S3MT-60KWR480V sune nau'ikan 480V na kunsa waɗanda suka haɗa da masu taswira guda biyu a cikin yadi ɗaya: 480V (Delta) zuwa 208V (Wye) shigar da keɓantaccen mai ba da wutar lantarki da 208V (Wye) zuwa 480V fitarwa auto mataki-up transformer.
Mai haɗawa da keɓancewar shigarwar yana rage hawan layin mai amfani da tsinke yayin da yake kare UPS. An ƙirƙiri mai sarrafa kayan fitarwa don tallafawa nauyin 480V (Wye) IT. Waɗannan samfuran suna da ingantattun na'urorin kewayawa don hana wuce gona da iri masu haɗari. Magoya bayan ƙwallon ƙafa huɗu na S3MT-30KWR480V da masu ɗaukar ƙwallon ƙafa guda takwas don S3MT- 60KWR480V suna kula da aikin shuru kuma suna taimakawa wajen watsar da zafin wuta. Relay mai saurin jin zafi da canjin zafi, haɗe tare da hasken LED a gaban panel, suna ba da faɗakar da zafin zafin jiki da kariya mai zafi. Ƙaramin sawun tsarin UPS da ƙwararriyar sauti mai shirufile ba da damar shigarwa tare da ƙaramin sarari da tasirin amo. Duk nau'ikan masu canzawa suna nuna gidaje masu bakin karfe tare da bangarorin gaba masu kama da layin S3M-Series 208V 3-Phase UPS.

Samfurin UPS	Lambar Jerin	Iyawa	Bayani
Saukewa: S3MT-30KWR480V (Ba a jituwa da SUT2OK ko SUT3OK UPS)	DA-0511	30kW	shigar da Transformer: 480V zuwa 208V Warewa Matakan Canja-ƙasa Canjin Fitarwa: 208V zuwa 480V Mai Canjin Matakan Matakan Kai
Saukewa: S3MT-60KWR480V (Ba a jituwa da SUT4OK ko SUT6OK UPS)	DA-0512	60kW	shigar da Transformer: 480V zuwa 208V Warewa Matakan Canja-ƙasa Canjin Fitarwa: 208V zuwa 480V Mai Canjin Matakan Matakan Kai

Aikace-aikace na yau da kullun
4-Wire (3Ph + N + PE) kayan aikin IT a cikin gwamnati, masana'antu, asibitoci, saitunan masana'antu, da saitunan kamfanoni waɗanda ke da 480V lantarki mains da 480V IT lodi.

Mabuɗin Siffofin

• Shigar da taswirar matakin ƙasa tana ba da kariya ta keɓewar 480V (Delta) zuwa 208V/120V (Wye) zuwa shigar da UPS
• Mai sarrafa kayan sarrafawa yana samar da 208V (Wye) zuwa 480V (Wye) mataki-mataki don tallafawa nauyin 480V IT.
• Masu satar wutar lantarki a wurin fitar da na'urar watsawa da shigar da wutar lantarki
• Gargadi mai zafi da karewa
• 95.2% zuwa 97.5% inganci
• Babban fa'ida voltage da kewayon aiki na mitar: Voltage: -20% zuwa +25% @ 100% kaya da 40-70 Hz
• Insulation: 180 ° C abu
• An gwada dogaro da aminci bisa ga ISTA-3B don girgizawa, girgiza, sauke (gwajin gwaji)
• UL da CSA TUV takaddun shaida
• Rugged bakin karfe gidaje sufuri shirye don shigarwa
• Garanti na shekaru 2

Na Musamman Kanfigareshan
Mai jujjuyawar 480V Wrap-Around (WR) ya haɗa da abubuwan shigarwa (T-in) da fitarwa (T-out) a cikin yadi ɗaya. Ana iya siyan waɗannan Masu Canja-canje na 480V daban ko azaman wani ɓangare na ƙirar kit tare da UPS na 3-Phase na Tripp Lite S3M:

Samfuran Canja-canje		Matsakaicin Load na yau da kullun	Mai jituwa da 208V 3 PH UPS	Models na Kit: UPS + Transformer
				Samfuran Kit	Samfuran Kit ɗin sun haɗa
480V	Saukewa: S3MT-30KWR480V	30kW	UPS 20-30kW (Ba a jituwa da SUT2OK ko SUT30K)	Saukewa: S3M30K-30KWR4T	S3M3OK UPS + Saukewa: S3MT-30KWR480V
	Saukewa: S3MT-60KWR480V	60kW	50 60kW UPS (Ba a jituwa da SUT4OK ko SUT60K)	Saukewa: S3M50K-60KWR4T	S3M5OK UPS + Saukewa: S3MT-60KWR480V
				Saukewa: S3M60K-60KWR4T	S3M6OK UPS + Saukewa: S3MT-60KWR480V

Muhimman Gargaɗi na Tsaro

Ajiye waɗannan umarni
Wannan littafin ya ƙunshi mahimman umarni don samfuran S3MT-30KWR480V da S3MT-60KWR480V waɗanda yakamata a bi su yayin shigarwa da kiyaye taswira da UPS.
HANKALI! Hadarin girgiza wutar lantarki! Abubuwan raye-raye masu haɗari a cikin wannan naúrar ana ƙarfafa su daga taransfoma ko da an kashe na'urar.
GARGADI! An yi nufin naúrar don shigarwa a cikin yanayin sarrafawa.
HANKALI! Mai canzawa zai iya gabatar da haɗarin girgizar lantarki da babban ɗan gajeren zango. Ya kamata a kiyaye taka tsantsan na gaba yayin aiki akan mai juyawa:

• Cire agogo, zobe, ko wasu abubuwan ƙarfe.
• Yi amfani da kayan aikin da keɓaɓɓun hannaye.

Don rage haɗarin girgiza wutar lantarki, cire haɗin taswira da UPS daga babban kayan aiki kafin aiwatar da kulawa ko sabis.
Sabis ɗin mai jujjuyawar zamani 3 da UPS yakamata a yi ta ƙwararrun ma'aikatan Tripp Lite tare da sanin mai jujjuyawar mataki 3 da UPS da duk taka tsantsan da ake buƙata.
Transformer yana da nauyi sosai. Ya kamata a yi taka tsantsan wajen motsi da sanya kayan aiki. Umurnin da ke ƙunshe cikin wannan littafin yana da mahimmanci kuma yakamata a bi a koyaushe a duk lokacin shigarwa da bin diddigin mai jujjuyawar 3 da UPS.

HANKALI!
Gidan wuta yana da matakin zafi mai haɗari. Idan mai jujjuya gaban gaban panel ja alamar LED yana kunne, kantunan naúrar na iya samun matakin zafi mai haɗari.
Dukkan sabis a kan wannan kayan aikin dole ne ma'aikatan sabis ɗin da aka ba da izini na Tripp Lite.
Kafin gudanar da kowane gyara, gyara, ko jigilar kaya, da farko, tabbatar da cewa an kashe komai gaba ɗaya kuma an cire shi.

Alamomi na Musamman - Ana amfani da alamomi masu zuwa akan taranfoma don faɗakar da kai game da hattara:
HADARI NA TSORON LANTARKI - Kula da gargaɗin cewa haɗarin girgizar lantarki yana nan.
HANKALI – NUNA ZUWA GA MANZON ALLAH don bayani game da mahimman umarnin aiki da kulawa.
TAMBAYOYIN TASHIN HANKALI - Yana Nuna Ƙasa mai aminci na farko.

Shigarwa

Bayanan Injini

Bukatun Jiki
Bar sarari kusa da kabad don aiki da samun iska (Hoto 3-1):

1. Bar akalla 23.6 inci (600 mm) sarari a gaba don samun iska
2. Bar akalla 20 inci (500 mm) sarari a dama da hagu don aikin
3. Bar aƙalla 20 inci (500 mm) sarari a baya don samun iska

Duban Kunshin

1. Kada a jingina majalisar taransifomar lokacin cire ta daga kunshin.
2. Bincika bayyanar don ganin ko majalisar ministocin ta lalace yayin jigilar kaya. Kar a ba da iko a kan gidan wuta idan an sami wata lalacewa. Tuntuɓi dillalin nan da nan.
3. Duba na'urorin haɗi akan lissafin shiryawa kuma tuntuɓi dila idan akwai ɓatattun sassan.

Ana buɗe UPS

1. Riƙe farantin faifai a tsaye. Yanke kuma cire madaurin dauri (Hoto 3-2).
   
2. Cire jakar filastik da kwalin waje (Hoto 3-3).
   
3. Cire kayan tattara kumfa da pallet ɗin da aka lakafta (Hoto 3-4).
   
4. Cire sukulan da ke tabbatar da majalisar zuwa pallet (Hoto na 3-5).
   
5. Ɗaga majalisar tare da cokali mai yatsa kuma cire palette ɗin tattarawa (Hoto 3-6).
   

Abubuwan Kunshin

Abubuwan da ke ciki	TL P/N	Saukewa: S3MT-30KWR480V	Saukewa: S3MT-60KWR480V
Canja wurin shigarwa da fitarwa a cikin Majalisar Ministoci Daya		1	1
Littafin Mai shi	933D04	1	1
Tufafin Ƙasa	103922 A	2	2
Tufafin Ƙasa	103923 A	2	2
Sukurori don Skirts	3011C3	24	24

Majalisar Ministaview

1 Fitarwa Mai Canjawa Sama da Zazzabi Ƙararrawa LED	6 Fitar Mai Saurin Sauyi tare da Tafiya
2 Input Mai Canjawa Sama da Zazzabi Ƙararrawa LED	7 Input Transformer Cabling Terminal
3 Fitowar Canji Mai sanyaya Masoya	8 Tashar Tashar Canjin Canjin Fitarwa
4 Input Transformer Cooling Fans	Knockouts na Shiga ƙasa 9 (don Shigar Cable Power da Fita)
5 Input Transformer Breaker tare da Tafiya

Wutar Lantarki
Tsarin kebul zai dace da ƙarartages da raƙuman ruwa da aka bayar a wannan ɓangaren, kuma daidai da lambobin lantarki na gida.

GARGADI!
BAYAN FARA, TABBATAR KA SANIN WURI DA AIKI NA WAJEN IZALA DA AKE HADA DA UPS INPUT/BYPASS NA PANEL RABON AMFANI.
TABBATAR DA WADANNAN KAYAN KAYAN SUN KEBACI WUTAR LANTARKI KUMA KA BUGA ALAMOMIN GARGADI DOMIN HANA AIKI BA TARE.

Girman Cable

Samfurin UPS	Girman Cable (Wayar THHW a 75 ° C)
	Shigar AC		Fitar AC		tsaka tsaki		Kasa
	Ma'auni	Torque	Ma'auni	Torque	Ma'auni	Torque	Ma'auni	Torque
Saukewa: S3MT-30KWR480V	Shigar da wutar lantarki
	6AWG Max. 3 AWG	6.5N•m	3 AWG Max. 3 AWG	6.5N•m	3 AWG Max. 3 AWG	6.5N • m	3 AWG Max. 3 AWG	6.5N •rn
	Fitar da wutar lantarki
	6AWG Max. 3 AWG	6.5N•m	3 AWG Max. 3 AWG	6.5N •rn	3 AWG Max. 3 AWG	6.5N •rn	3 AWG Max. 3 AWG	6.5N•m

Samfurin UPS	Girman Cable (Wayar THHW a 75 ° C)
	Shigar AC		Fitar AC		tsaka tsaki		Kasa		Lug
	Ma'auni	Torque	Ma'auni	Torque	Ma'auni	Torque	Ma'auni	Torque
Saukewa: S3MT-60KWR480V	Shigar da wutar lantarki
	50mm2 ku Max. 50mm2x2	25N•m	50mm2 x2 Max. 50mm2 x2	25N•m	70mm2x2 Max. 70mm2x2	25N•m	50mm2 ku Max. 50mm2 x2	25N •rn	M8
	Fitar da wutar lantarki
	50mm2 ku Max. 50mm2x2	25N•m	50mm2 x2 Max. 50mm2 x2	25N•m	70mm2x2 Max. 70mm2x2	25N •rn	50mm2 ku Max. 50 mm2 x2	25N •rn	M8

Shigarwa da Fitarwa Tsarin Layin Haɗin Canza-zuwa-UPS
Ana nuna haɗin kai a ƙasa don majalisar ministocin tare da ginanniyar shigarwar mai keɓancewa, mai fitarwa na atomatik, da masu karyawa tare da balaguro da LED kuskure.

Haɗin Transformer da yawa

GARGADI:
Ba a haɗa tsaka-tsakin fitarwa mai shigar da wutar lantarki (T-in) zuwa ƙasan chassis. Da fatan za a samar da hanyar haɗa ƙasan chassis na transformer zuwa tsaka tsaki na fitarwa.
Lura: Dole ne a haɗa ƙasan chassis na transformer da ƙasan ƙasa.
MUHIMMI: Kuna iya view da/ko zazzage wannan littafin daga tripplite.com website ku view haɗin kebul a cikin launuka.

Haɗin S3MT-30KWR480V don 20kVA zuwa 30kVA 208V UPS Systems
Lura: Wannan taswira bai dace da tsarin SUT20K da SUT30K UPS ba.

Transformer Cabinet
Lura: Shigar da taswirar ita ce Delta 3-Wire (3Ph + Ground) kuma abin da ake fitarwa shine Wye 4-Wire (3Ph + N + Ground).

Haɗin S3MT-60KWR480V don 50kVA ko 60kVA UPS Systems
Lura: Wannan taswira bai dace da tsarin SUT40K da SUT60K UPS ba.

GARGADI:
Ba a haɗa tsaka-tsakin fitarwa mai shigar da wutar lantarki (T-in) zuwa ƙasan chassis. Da fatan za a samar da hanyar haɗa ƙasan chassis na transformer zuwa tsaka tsaki na fitarwa.
Lura: Dole ne a haɗa ƙasan chassis na transformer da ƙasan ƙasa.
MUHIMMI: Kuna iya view da/ko zazzage wannan littafin daga tripplite.com website ku view haɗin kebul a cikin launuka.

Transformer Cabinet
Lura: Shigar da Transformer shine Delta 3-Wire (3Ph + Ground) kuma mai fitarwa shine Wye 4-Wire (3Ph + N + Ground).

Aiki

Kariya fiye da zafin jiki
Gargadi na Ƙarar Zazzabi LED (Ja)
Na'urar ta atomatik ta haɗa da fitilun LED masu faɗakarwa guda biyu a saman ɓangaren gaban panel: haske ɗaya don na'urar shigarwa da haske ɗaya don na'urar fitarwa. Hasken faɗakarwa mai dacewa zai kunna lokacin da gefen na biyu na shigarwar (T-in) ko lokacin da ɓangaren farko na kayan fitarwa (T-out) ya kai zazzabi na 160 ° C ± 5 ° C, watau kewayon 155 °C zuwa 165°C (311°F zuwa 329°F). Hasken faɗakarwa yana kashewa lokacin da taswirar ta yi sanyi zuwa zafin jiki na 125°C ± 5°C, watau kewayon 120°C zuwa 130°C (248°F zuwa 266°F).

Relay na Kariyar Zazzabi da Canjin Zazzabi
Na'urorin lantarki sun haɗa da na'urar kariya ta zafin jiki da canjin yanayin zafi a ɓangarorin biyu na shigarwar (T-in) da kuma a gefen farko na kayan fitarwa (T-out) don kare tafsirin daga zafi.

• Masu Canjin Shigarwa (T-in): Idan bangaren na biyu na na'urar ta (T-in) na shigar da wutar lantarki ya kai yanayin zafi na 160°C ± 5°C, watau kewayon 155°C zuwa 165°C (311°F zuwa 329°F), da kuma kariyar yawan zafin jiki. relay da thermal switch zai kunna kuma zai bude breaker a gefen na biyu na transformer. Da zarar zafin jiki na wutan lantarki ya yi sanyi zuwa 125°C ± 5°C, watau kewayon 120°C zuwa 130°C (248°F zuwa 266°F) hasken wutar lantarki zai kashe, kuma zaku iya sake kunnawa da hannu ( kusa) na'urar fitarwa a kan taswirar don sake fara aiki na yau da kullun.
• Masu Canjin Fitarwa (T-out): Idan bangaren farko na (T-out) na'urar wutar lantarki ya kai yanayin zafi na 160°C ± 5°C, watau kewayon 155°C zuwa 165°C (311°F zuwa 329°F), da kuma kariya daga zafin jiki. relay da thermal switch zai kunna kuma zai bude breaker a gefen farko na transformer. Da zarar zafin wutar lantarki ya huce zuwa 125°C ± 5°C, watau kewayon 120°C zuwa 130°C (248°F zuwa 266°F), hasken wutar lantarki zai kashe, kuma zaku iya sake kunnawa da hannu. -kunna (kusa) na'urar shigar da bayanai akan taswira don sake fara aiki na yau da kullun.

Ƙayyadaddun bayanai

Samfura		Saukewa: S3MT-30KWR480V	Saukewa: S3MT-60KWR480V
	Bayani	Biyu 30kW Transformer a cikin majalisar ministoci daya: Input Isolation Transformer (T-In) 480V Input (Delta) zuwa Fitar 208V (Wye) Transformer, da Fitarwa Auto Transformer (T-Out) 208V (Wye) Shigarwa zuwa 480V (Wye) fitarwa	Biyu 60kW Transformer a cikin majalisar ministoci daya: Input IsolationTransformer (T-In) 480V Input (Delta) zuwa Fitar 208V (Wye) Transformer, da Fitarwa Auto Transformer (T-Out) 208V (Wye) Shigarwa zuwa 480V (Wye) fitarwa
	Kimar KVA/kW don Input (T in) da Fitarwa (T-out) Masu Canja-canje	30kVA/30kW	60kVA/30kW
	Nau'in Mai Canzawa	Dry-Nau'in
BAYANIN GABATARWA NA JUYIN HALITTA
Transformer (T-In)	T-in Input Voltage	480V	480V
	T-in Input Voltage Range	-45%+25%) don 40 % kaya (-20% + 25%) don 100 % kaya	(-45% + 25%) don 40 % kaya (-20% + 25%) don 100 % kaya
	Shigar T-in Amp(s)	51 A	101 A
	T-in Input No. Na matakai	3PH	3 PH
	T-in Input Connections	3-Waya (L1, L2, L3 + PE)	3-Waya (L1, L2, L3 + PE)
	T-in AC Kanfigareshan Shigarwa	Delta	Delta
	T-in !sa Nau'in Haɗin kai	Bar Bar	Bar Bar
	T-in AC Mitar shigarwa	50/60	50/60
	Matsakaicin T-in	40/70 Hz	40/70 Hz
	T-in Voltage Zabi	N/A	WA
	Voltage Drop Ratio: Fitarwa ba tare da kaya don fitarwa tare da Cikakken Load	3%
	Warewar T-Input	Ee
	Shigarwar T-a na Yanzu	d010A (10ms)	I 920A (10ms)
Transformer (T-Out)	T-out Input Voltage Range	(-45%+25%) na 40 % kaya (-20%+25%) na kaya 100 %
	T-out Input Voltage	208V
	Shigar T-fita Amp(s)	87 A	173 A
	T-fita No. Na matakai	3PH	3PH
	T-fita Haɗin Input	4-Waya (L1, L2 L3 + N + PE)
	T-out AC Kanfigareshan Shigarwa	WYE
	Nau'in haɗin shigarwa T-out	Bar Bar	Bar Bar
	T-out AC Mitar Shigarwa	50/60	50/60
	T-out Mitar Range	40/70 Hz	40-70 Hz
	T-out Voltage Zabi	N/A	WA
	Warewar shigar da T-fita	A'a
	T-out Input Inrush Yanzu	1010A (10 ms)	2020A (10 ms)

Samfura		Saukewa: S3MT-30KWR480V	Saukewa: S3MT-60KWR480V
Warewar shigar da T-fita
Transformer (T-In)	T-in AC fitarwa Voltage (V)	208V	208V
	T-in AC fitarwa Amps	113 A	225 A
	T-in Fitowar Lamba. Na matakai	3PH	3PH
	Haɗin Fitar T-in	4-Waya (L1, L2, L3 +N + PE)
	T-in AC Kanfigareshan Fitarwa	Me	Me
	Nau'in Haɗin T-in	Bar Bar	Bar Bar
	Ƙididdiga Mai Kashe Fitar T-in	125 A	250 A
Transformer (T-Out)	T-out AC fitarwa Amps	36 A	72 A
	T-fitarwa No. Na matakai	3PH	3PH
	T-Fitar Haɗin kai	4-Way (L1, L2, L3 + N + PE)
	T-out AC Kanfigareshan Fitar	Me	Me
	Nau'in Haɗin T-out	Bar Bar	Bar Bar
	Ƙididdiga Mai Kashe Fitar T-in	125 A	250 A
Aiki
	Gargadi na Ƙarar Zazzabi LED (Ja)	Yana Kunnawa a 160°C±-5°C (155°C/311°F zuwa 165°C/329°F) da Yana kashewa a 125°C ±5°C (120°C/248°F zuwa 130°C/266°F)
	Na'urar Sake Sake Kariyar Zazzabi	T-in: Canja wurin shigarwa • Fitarwa mai jujjuyawa/ na sakandare zai kasance KASHE (Mai karya yana buɗewa) a 160°C ±5°C (155°C/311°F zuwa 165°C/329°F). • Kuna iya kunna mai karya fitarwa (kusa) da hannu lokacin da hasken LED ya kashe. • Hasken faɗakarwa zai kashe a 125°C ±5°C (120°C/248°F zuwa 130°C/266°F), wanda a lokacin zaku iya rufe na'urar da hannu don sake fara aiki. T-out: Transformer na fitarwa •Mai shigar da canji/na farko zai kasance KASHE (Breaker yana buɗewa) a yanayin zafi na 160°C ±5°C (155°C/311°F zuwa 165°C/329°F). • Kuna iya kunna mai karya shigar da bayanai (kusa) da hannu lokacin da hasken LED ya kashe. • Hasken walƙiya na Gargaɗi zai kashe a 125°C ±5°C (120°C/248°F zuwa 130°C/266°F), wanda lokacin zaku iya rufe na’urar da hannu don sake fara aiki.
	Insulation Class	180°C
	Hawan zafin jiki	125°C
	T-in Efficiency @ Cikakken Load	95%	97%
	T-in Efficiency @ Rabin Load	98%	98%
	T-out Efficiency @ Cikakken Load	95%	97%
	T-out Efficiency @ Rabin Load	98%	98%

Samfura		Saukewa: S3MT-30KWR480V	Saukewa: S3MT-60KWR480V
Bayanin Jiki
	Tsayin Naúrar (Inci/cm)	63/160
	Nisa Naúrar (Inci/cm)	23.6/60
	Zurfin Naúrar (Inci/cm)	33.5/85.1
	Nauyin Raka'a (Lbs./Kg)	961/436	1398/634
	Ƙoron Ƙasa	855 kg/m2	1243 kg/m2
	Tsawon Kartin Naúrar (Inci/cm)	70.9/180.1
	Nisa Carton Naúrar (Inci/cm)	27.6/70.1
	Zurfin Kartin Naúrar (Inci/cm)	37.8/96
	Nauyin Carton Naúrar (Lbs./Kg)	1058/479.9	1510/684.9
	Tip-n-Tell Label da ake buƙata (Y/N)	Ee
	Audible Noise (ENG)	65dB max
	Humidity na RH, Mara Ƙarfafawa	95%
	Rushewar thermal Kan layi a Cikakken Load, (Btu/Hr)	9829	7167
	Ma'ajiya Zazzabi (ENG)	-15-60C
	Yanayin Aiki (ENG)	0 ° C - 40 ° C
	Hawan Aiki	<1000 meters for nominal power (fiye da 100m, De-rating ikon ne 1% ta 100 m)
Makanikai
	Transformer Winding	Aluminum
	Kayan Majalisar	Cold birgima galvanized Karfe (SGCC)
	Launin Majalisar	Farashin 9011
	Fan (Nau'i / Yawan)	4 x Ƙarƙashin Ƙarƙashin Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa, 120 mm (576 jimlar CFM)	8 x Ƙarƙashin Ƙarƙashin Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa, 120 mm (1152 jimlar CFM)
Dogara
	Jijjiga	ISTA-3B
	Girgiza kai	ISTA-3B
	Sauke	ISTA-3B (Gwajin Tip)
Amincewa da Hukumar
	Hukumar Amincewa	cTUVs
	An gwada Standard na Hukumar	UL 1778 Bugu na 5
	Yarjejeniyar Kanada	CSA 22.2-107.3-14
	Takaddun CE	N/A
	Amincewar EMI	N/A
	RoHS/ISU	Ee

Adana

Kafin adana keɓewar taransifoma, tabbatar da an katse duk haɗin gwiwa kuma an kashe duk masu fashewa.
Maye gurbin duk shigarwar shigarwa ko fitarwa mai rufewa don guje wa lalata kowane lambobi.
Dole ne a adana na'urar taransifoma cikin yanayi mai tsabta, amintacce tare da yanayin zafi tsakanin 5 ° F zuwa 140 ° F (-15 ° C zuwa 60 ° C) da kuma dangin zafi ƙasa da 90% (ba condensing).
Ajiye transformer a cikin akwati na jigilar kayayyaki na asali, idan ya yiwu.
GARGADI: Transformer(s) suna da nauyi sosai. Kafin adana na'urar, tabbatar da yin la'akari da buƙatun lodin ƙasa (kg/m²) da aka jera a sashe na 5. Ƙayyadaddun bayanai a ƙarƙashin "Bayanin Jiki" don adanawa lafiya.

Garanti da Yarda da Dokoki

Garanti mai iyaka
Mai siyarwa yana ba da garantin wannan samfurin, idan aka yi amfani da shi daidai da duk umarnin da aka zartar, don zama ƴancin asali daga lahani na asali a cikin kayan aiki da aiki na tsawon shekaru 2 daga ranar siyan farko. Idan samfurin ya tabbata yana da lahani a cikin kayan aiki ko aiki a cikin wannan lokacin, Mai siyarwa zai gyara ko maye gurbin samfurin, a cikin ikonsa kawai. Sabis a ƙarƙashin wannan Garanti ya ƙunshi sassa kawai. Abokan ciniki na duniya yakamata su tuntuɓi tallafin Tripp Lite a intlservice@tripplite.com. Abokan ciniki na Amurka ya kamata su tuntuɓi Sabis na Abokin Ciniki na Tripp Lite a 773-869-1234 ko ziyarta tripplite.com/support/help Wannan garantin baya amfani da sawa na al'ada ko don lalacewa sakamakon hatsari, rashin amfani, cin zarafi ko sakaci. MAI SALLA BABU GARANTIN KIYAYYA SAI GARANTIN DA AKA SHIGA GASKIYA ANAN. SAI DAI DA DOKAR DOKA TA HARAMTA, DUK GARANTIN DA AKE NUFI, HADA DUK GARANTIN CIN KYAUTA KO KWANTAWA, ANA IYA IYAKA A LOKACIN GARANTIN DA AKA SHIGA A sama; KUMA WANNAN GARANTIN YAKE KARE DUK ILLOLIN MAFARA DA SAMARI. (Wasu jihohi ba sa ba da izinin iyakancewa kan tsawon lokacin da garanti mai ma'ana zai kasance, kuma wasu jihohin ba sa ba da izinin keɓance ko iyakancewar lalacewa ko lahani, don haka iyakoki ko keɓantawa na sama bazai shafi ku ba. Wannan Garanti yana ba ku takamaiman haƙƙin doka. , kuma kuna iya samun wasu haƙƙoƙi, waɗanda suka bambanta daga hukunce-hukunce zuwa hukumci.)
Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; Amurka
GARGADI: Mai amfani yakamata ya kula don tantance kafin amfani da ko wannan na'urar ta dace, isasshe ko lafiya don amfanin da aka yi niyya. Tun da ɗayan aikace-aikacen ke ƙarƙashin babban bambance-bambance, masana'anta ba su da wakilci ko garanti dangane da dacewa ko dacewa da waɗannan na'urori don kowane takamaiman aikace-aikacen.

Rijistar Samfura
Ziyarci tripplite.com/warranty yau don yin rijistar sabon samfurin ku na Tripp Lite. Za a shigar da ku ta atomatik cikin zane don samun damar cin nasarar samfurin Trip Lite KYAUTA!*
* Babu siyayya dole. Babu inda aka haramta. Wasu ƙuntatawa suna aiki. Duba cikin webshafin don cikakkun bayanai.

WEEE Bayanin Yarda da Abokan Ciniki da Maimaitawa na Tarayyar Turai (Tarayyar Turai)
A karkashin sharar gida da kayan lantarki (weee) direbobi da aiwatar da ka'idodi, lokacin da abokan ciniki suka sayi sabbin kayan aiki na lantarki da na lantarki daga Tript Lís sun cancanci zuwa:

• Aika tsofaffin kayan aiki don sake amfani da su akan ɗaya-da-daya, kama-da-iri (wannan ya bambanta dangane da ƙasar)
• Aika sabon kayan aiki don sake amfani da su lokacin da wannan ya zama sharar gida

Amfani da wannan kayan aiki a aikace-aikacen tallafi na rayuwa inda za a iya sa ran gazawar wannan kayan aikin na iya haifar da gazawar kayan tallafin rayuwa ko kuma ya shafi lafiyarsa ko ingancinsa ba a ba da shawarar ba.
Tripp Lite yana da manufofin ci gaba da haɓakawa. Ana iya canza ƙayyadaddun bayanai ba tare da sanarwa ba. Hotuna da zane-zane na iya bambanta dan kadan daga ainihin samfuran.

1111 W. 35th Street, Chicago, IL 60609 Amurka • tripplite.com/support

Takardu / Albarkatu

TRIPP-LITE S3MT-60KWR480V S3MT-Series 3-Input Input and Output Transformers [pdf] Littafin Mai shi S3MT-30KWR480V, S3MT-60KWR480V, S3MT-60KWR480V S3MT-Series 3-Phase Input and Output Transformers,S3MT-60KWR480V

Magana

• Manual mai amfani