Jagoran Fara Mai Sauri
SMWB-E01 Mara waya ta Microphone Transmitters da Recorders
Mara waya ta Microphone Transmitters da Recorders
SMWB, SMDWB, SMWB/E01, SMDWB/E01, SMWB/E06, SMDWB/E06, SMWB/E07-941, SMDWB/E07-941, SMWB/X, SMDWB/X
Cika don bayananku:
Serial Number:
Kwanan Sayarwa:
An yi nufin wannan jagorar don taimakawa tare da saitin farko da aiki na samfurin ku na Lectrosonics.
Don cikakken littafin jagorar mai amfani, zazzage mafi kyawun sigar yanzu a: www.lectrosonics.com
Farashin SMWB
Mai watsawa na SMWB yana ba da ingantacciyar fasaha da fasalulluka na Digital Hybrid Wireless® kuma yana haɗa sarkar sauti na dijital na 24-bit tare da hanyar haɗin rediyon analog FM don kawar da ƙawance da kayan aikin sa, duk da haka yana kiyaye tsawaita kewayon aiki da ƙirjin amo mafi kyawun mara waya ta analog. tsarin. DSP "Hanyoyin daidaitawa" yana ba da damar mai watsawa kuma a yi amfani da shi tare da nau'ikan masu karɓar analog iri-iri ta hanyar yin koyi da kwatancen da aka samu a baya Lectrosonics analog mara waya da masu karɓar IFB, da wasu masu karɓa daga wasu masana'antun (tuntuɓi masana'anta don cikakkun bayanai).
Bugu da kari, SMWB yana da ginanniyar aikin rikodi don amfani a cikin yanayi inda RF bazai yiwu ba ko kuma yayi aiki azaman mai rikodi shi kaɗai. Ayyukan rikodin da ayyukan watsawa keɓantacce ne na juna - ba za ku iya yin rikodi DA watsawa a lokaci guda ba. Mai rikodin sampLes a ƙimar 44.1kHz tare da 24 bit sampda zurfin. (An zaɓi ƙimar saboda ƙimar 44.1kHz da ake buƙata da aka yi amfani da shi don algorithm matasan dijital). Katin micro SDHC kuma yana ba da damar sabunta firmware mai sauƙi ba tare da buƙatar kebul ba
Sarrafa da Ayyuka
Shigar da baturi
Batir AA (ies) ke aiki da masu watsawa. Muna ba da shawarar amfani da lithium don tsawon rayuwa.
Saboda wasu batura suna gudu ba zato ba tsammani, yin amfani da LED Power don tabbatar da matsayin baturi ba zai zama abin dogaro ba. Koyaya, yana yiwuwa a waƙa da matsayin baturi ta amfani da aikin mai ƙidayar baturi da ake samu a cikin Lectrosonics Digital Hybrid Wireless receivers.
Ƙofar baturi tana buɗewa ta hanyar buɗe kn ɗin kawaiurled knob part hanya har kofar zata juya. Hakanan ana cire ƙofar cikin sauƙi ta hanyar cire kullun gaba ɗaya, wanda ke taimakawa lokacin tsaftace lambobin baturi.
Ana iya share lambobin baturi da barasa da swab, ko goge fensir mai tsabta. Tabbatar cewa kar a bar duk wani rago na swab na auduga ko crumbs na gogewa a cikin ɗakin.
Ƙaramin madaidaicin madaidaicin man shafawa na azurfa * akan zaren babban yatsan hannu na iya inganta aikin baturi da aiki. Yi wannan idan kun fuskanci faɗuwar rayuwar baturi ko haɓaka yanayin zafin aiki.
Saka batura bisa ga alamomin bayan gidan.
Idan an shigar da batura ba daidai ba, ƙofar na iya rufewa amma naúrar ba za ta yi aiki ba.
* idan ba za ku iya gano mai sayar da irin wannan man shafawa ba - kantin kayan lantarki na gida na tsohonample – tuntuɓi masana'anta don ƙaramin vial ɗin kulawa.
Kunna Wuta
Gajerun Maballin Latsa
Lokacin da aka kashe naúrar, ɗan gajeren latsa maɓallin wuta
zai kunna naúrar a Yanayin jiran aiki tare da kashe fitowar RF.
RF mai nuna alama
Don kunna fitowar RF daga Yanayin jiran aiki, danna Maballin Wuta, zaɓi Rf Kunna? zaɓi, sannan zaɓi ee.
Latsa Dogon Maɓalli
Lokacin da aka kashe naúrar, dogon danna maɓallin wuta zai fara kirgawa don kunna naúrar tare da kunna fitarwar RF. Ci gaba da riƙe maɓallin har sai an gama kirgawa.
Idan maɓallin ya fito kafin a gama kirgawa, naúrar za ta yi ƙarfi tare da kashe fitarwar RF.
Lokacin da aka riga an kunna naúrar, ana amfani da Maɓallin Wuta don kashe naúrar, ko don samun damar menu na saitin.
Dogon latsa maɓallin yana fara kirgawa don kashe naúrar.
Wani ɗan gajeren danna maɓallin yana buɗe menu don zaɓuɓɓukan saiti masu zuwa.
Zaɓi zaɓi tare da maɓallin kibiya sama da ƙasa sannan danna MENU/SEL.
- Ci gaba yana mayar da naúrar zuwa allon da ya gabata da yanayin aiki
- Pwr Off yana kashe naúrar
- rf Na? yana kunna ko kashe fitarwar RF
- AutoOn? yana zaɓar ko naúrar zata kunna ta atomatik bayan canjin baturi
- Blk606? - yana ba da damar Yanayin gado na Toshe 606 don amfani tare da Block 606 masu karɓa (akwai akan rukunin Band B1 da C1 kawai).
- Nisa yana ba da damar ko yana kashe ikon nesa na mai jiwuwa ( sautunan dweedle)
- Nau'in Bat yana zaɓar nau'in baturin da ake amfani da shi
- Backlit yana saita tsawon hasken baya na LCD
- Agogo yana saita shekara/wata/rana/Lokaci
- Kulle yana kashe maɓallan panel ɗin sarrafawa
- Kashe LED yana ba da damar / yana kashe LEDs panel panel
- Game da nuni da lambar ƙira da sake fasalin firmware
Daga Babban/Allon Gida, ana samun gajerun hanyoyi masu zuwa:
- Yi rikodin: Danna MENU/SEL + UP kibiya lokaci guda
- Dakatar da Rikodi: Danna MENU/SEL + kibiya ƙasa lokaci guda
Umarnin Aiki na watsawa
- Shigar da baturi
- Kunna wuta a yanayin jiran aiki (duba sashin da ya gabata)
- Haɗa makirufo kuma sanya shi a wurin da za a yi amfani da shi.
- Sanya mai amfani yayi magana ko waƙa a daidai matakin da za a yi amfani da shi wajen samarwa, kuma daidaita ribar shigarwa ta yadda -20 LED ya yi ja akan kololuwa masu ƙarfi.
- Saita mita da yanayin dacewa don dacewa da mai karɓa.
- Kunna fitowar RF tare da Kunna RF? abu a cikin menu na wuta, ko ta hanyar kashe wuta sannan a kunna yayin riƙe maɓallin wuta a ciki da jiran counter ɗin ya kai 3.
Yi rikodin Umarnin Aiki
- Shigar da baturi
- Saka microSDHC katin ƙwaƙwalwar ajiya
- Kunna wuta
- Tsara katin ƙwaƙwalwar ajiya
- Haɗa makirufo kuma sanya shi a wurin da za a yi amfani da shi.
- Sanya mai amfani yayi magana ko rera waƙa a daidai matakin da za a yi amfani da shi wajen samarwa, kuma daidaita ribar shigarwa ta yadda -20 LED ya yi ja akan kololuwa masu ƙarfi.
- Latsa MENU/SEL kuma zaɓi Rikodi daga menu
- Don tsaida rikodi, danna MENU/SEL kuma zaɓi Tsaida; kalmar SAVED tana bayyana akan allon
Don kunna rikodin, cire katin ƙwaƙwalwar ajiya kuma kwafi files zuwa kwamfuta tare da shigar da software na gyara bidiyo ko audio.
Daga Babban Window danna MENU/SEL.
Yi amfani da maɓallan kibiya na sama/Ƙasa don zaɓar abu.
Daga Babban Window danna maɓallin wuta.
Yi amfani da maballin kibiya UP/KASA don zaɓar abu.
Saita Bayanan Allon
Kulle/Buɗe Canje-canje zuwa Saituna
Ana iya kulle canje-canje ga saitunan a cikin Menu na Maɓallin Wuta.
Lokacin da aka kulle canje-canje, ana iya amfani da sarrafawa da ayyuka da yawa:
- Har yanzu ana iya buɗe saitunan
- Har yanzu ana iya bincika menus
- Lokacin kulle, WUTA KAWAI ZA'A iya kashewa ta cire batura.
Main Window Manuniya
Babban Window yana nuna lambar toshe, Jiran aiki ko Yanayin Aiki, mitar aiki, matakin sauti, matsayin baturi da aikin sauya shirye-shirye. Lokacin da aka saita girman matakin mita a 100 kHz, LCD zai yi kama da haka.
Lokacin da aka saita girman matakin mitar zuwa 25 kHz, lambar hex zata bayyana ƙarami kuma yana iya haɗawa da juzu'i.
Canza girman mataki baya canza mitar. Yana canza hanyar da mai amfani kawai ke aiki. Idan an saita mitar zuwa ƙarar juzu'i tsakanin ko da matakan 100 kHz kuma an canza girman matakin zuwa 100 kHz, lambar hex za a maye gurbin ta da alamomi guda biyu akan babban allo da allon mita.
Haɗa tushen siginar
Ana iya amfani da makirufo, tushen sauti na matakin layi da kayan aiki tare da mai watsawa. Koma zuwa sashin jagora mai taken Input Jack Wiring don Maɓuɓɓuka Daban-daban don cikakkun bayanai kan daidaitattun hanyoyin samar da matakan layin da makirufo don ɗaukar cikakken advan.tage na Servo Bias circuitry.
Kunna/kashe LEDs na Sarrafawa
Daga babban menu na menu, danna maɓallin kibiya mai sauri na UP yana kunna LEDs masu sarrafawa. Saurin danna maɓallin kibiya na ƙasa yana kashe su. Za a kashe maɓallan idan an zaɓi zaɓin LOCKED a menu na Maɓallin Wuta.
Hakanan za'a iya kunnawa da kashe LEDs ɗin sarrafawa tare da zaɓin Kashe LED a cikin menu na Maɓallin Wuta.
Abubuwan Taimako akan Masu karɓa
Don taimakawa wajen gano madaidaicin mitoci, masu karɓar Lectrosonics da yawa suna ba da fasalin SmartTune wanda ke bincika kewayon daidaitawar mai karɓar kuma yana nuna rahoton hoto wanda ke nuna inda siginar RF suke a matakai daban-daban, da wuraren da babu ƙarancin ƙarfin RF ko babu. Sa'an nan software ta atomatik za ta zaɓi mafi kyawun tashar don aiki.
Masu karɓa na Lectrosonics sanye take da aikin Sync na IR suna ba mai karɓa damar saita mita, girman mataki da yanayin dacewa akan mai watsawa ta hanyar haɗin infrared tsakanin raka'a biyu.
Files
Tsarin
Yana tsara katin ƙwaƙwalwar ajiyar microSDHC.
GARGADI: Wannan aikin yana goge duk wani abun ciki akan katin ƙwaƙwalwar ajiyar microSDHC.
Yi rikodin ko Tsaida
Fara yin rikodi ko dakatar da yin rikodi. (Duba shafi na 7.)
Daidaita Ribar Shigarwa
LEDs Modulation Modulation biyu na bicolor akan rukunin kulawa suna ba da alamar gani na matakin siginar sauti da ke shiga mai watsawa. LEDs zasu haskaka ko dai ja ko kore don nuna matakan daidaitawa kamar yadda aka nuna a tebur mai zuwa.
NOTE: Ana samun cikakken daidaitawa a 0 dB, lokacin da "-20" LED ya fara juya ja. Mai iyakancewa zai iya ɗauka da tsaftar kololuwa har zuwa 30 dB sama da wannan batu.
Zai fi kyau a bi ta wannan hanya tare da mai watsawa a cikin yanayin jiran aiki ta yadda babu sautin da zai shiga tsarin sauti ko na'ura yayin daidaitawa.
- Tare da sabbin batura a cikin mai watsawa, kunna naúrar a yanayin jiran aiki (duba sashin da ya gabata Kunnawa da KASHE).
- Kewaya zuwa allon saitin Gain.
- Shirya tushen siginar. Sanya makirufo yadda za a yi amfani da shi a ainihin aiki kuma sa mai amfani ya yi magana ko rera a mafi girman matakin da zai faru yayin amfani, ko saita matakin fitarwa na kayan aiki ko na'urar sauti zuwa matsakaicin matakin da za a yi amfani da shi.
- Yi amfani da maɓallan kibiya don daidaita riba har sai -10 dB ya haskaka kore kuma -20 dB LED ya fara yin ja a lokacin mafi girman kololuwa a cikin sauti.
- Da zarar an saita ribar mai jiwuwa, ana iya aika siginar ta hanyar tsarin sauti don daidaita matakin gabaɗaya, saitunan saka idanu, da sauransu.
- Idan matakin fitar da sauti na mai karɓar ya yi tsayi ko ƙasa kaɗan, yi amfani da abubuwan sarrafawa akan mai karɓar kawai don yin gyare-gyare. Koyaushe barin saitin daidaitawar ribar mai watsawa bisa ga waɗannan umarnin, kuma kar a canza shi don daidaita matakin fitarwa na mai karɓa.
Zabar Mitar
Allon saitin don zaɓin mita yana ba da hanyoyi da yawa don bincika mitocin da ke akwai.
Kowane filin zai bi ta cikin mitoci da ake da su a cikin wani ƙari daban-daban. Abubuwan haɓaka kuma sun bambanta a yanayin 25 kHz daga yanayin 100 kHz.
Wani juzu'i zai bayyana kusa da lambar hex a allon saitin kuma a cikin babban taga lokacin da mitar ta ƙare a .025, .050 ko .075 MHz.
Zaɓin Mitar Ta Amfani da Maɓalli Biyu
Riƙe maɓallin MENU/SEL a ciki, sannan yi amfani da maɓallin kibiya da maɓallan kibiya don ƙarin ƙarin.
NOTE: Dole ne ku kasance cikin menu na FREQ don samun damar wannan fasalin. Babu shi daga babban allo/gidan allo.
Idan Girman Mataki shine 25 kHz tare da mitar da aka saita tsakanin ko da matakan 100 kHz kuma Girman Matakin sannan an canza shi zuwa 100 kHz, rashin daidaituwa zai sa lambar hex ta nuna a matsayin taurari biyu. 
Game da Maɗaukakin Maɗaukakin Maɗaukaki
Lokacin da mitoci biyu suka zo juna, yana yiwuwa a zaɓi mitar iri ɗaya a saman ƙarshen ɗaya da ƙananan ƙarshen ɗayan. Yayin da mitar za ta kasance iri ɗaya, sautunan matukin jirgi za su bambanta, kamar yadda lambobin hex suka nuna.
A cikin wadannan exampDon haka, an saita mitar zuwa 494.500 MHz, amma ɗayan yana cikin band 470 ɗayan kuma a cikin band 19. Anyi wannan da gangan don kiyaye dacewa tare da masu karɓa waɗanda ke kunna a cikin band ɗin guda ɗaya. Lambar band da lambar hex dole ne su dace da mai karɓa don kunna madaidaicin sautin matukin jirgi.
Zaɓin Ƙarƙashin Ƙarƙashin Ƙarfafawa
Yana yiwuwa ƙananan mitar jujjuyawar mitar na iya rinjayar saitin riba, don haka yana da kyau gabaɗaya yin wannan gyara kafin daidaita ribar shigarwa. Za a iya saita wurin da za a gudanar da aikin zuwa:
- LF 35 35 Hz
- LF 50 50 Hz
- LF 70 70 Hz
- LF 100 100 Hz
- LF 120 120 Hz
- LF 150 150 Hz
Sau da yawa ana daidaita jujjuyawar ta kunne yayin sa ido kan sautin.
Zaɓin Yanayin Daidaitawa (Compat).
Yi amfani da kiban sama da ƙasa don zaɓar yanayin da ake so, sannan danna maɓallin BACK sau biyu don komawa zuwa Babban Tagar.
Hanyoyin dacewa kamar haka:
Samfuran Mai karɓa SMWB/SMDWB:
| • Nu Hybrid: | Nu Hybrid |
| • Yanayin 3:* | Yanayin 3 |
| Jerin IFB: | Yanayin IFB |
Yanayin 3 yana aiki tare da wasu samfuran da ba Lectrosonics ba. Tuntuɓi masana'anta don cikakkun bayanai.
NOTE: Idan mai karɓar Lectrosonics ɗin ku bashi da yanayin Nu Hybrid, saita mai karɓar zuwa Euro Digital Hybrid Wireless® (EU Dig. Hybrid).
/E01:
| • Digital Hybrid Wireless®: | EU Hybr |
| • Yanayin 3: | Yanayin 3* |
| Jerin IFB: | Yanayin IFB |
/E06:
| • Digital Hybrid Wireless®: | NA Hybr |
| Jerin IFB: | Yanayin IFB |
* Yanayin yana aiki tare da wasu samfuran da ba Lectrosonics ba. Tuntuɓi masana'anta don cikakkun bayanai. /X:
| • Digital Hybrid Wireless®: | NA Hybr |
| • Yanayin 3:* | Yanayin 3 |
| Jerin 200: | 200 Yanayin |
| Jerin 100: | 100 Yanayin |
| • Yanayin 6:* | Yanayin 6 |
| • Yanayin 7:* | Yanayin 7 |
| Jerin IFB: | Yanayin IFB |
Yanayin 3, 6 da 7 suna aiki tare da wasu samfuran da ba Lectrosonics ba. Tuntuɓi masana'anta don cikakkun bayanai.
Zaɓi Girman Mataki
Wannan abun menu yana ba da damar zaɓar mitoci a ko dai 100 kHz ko 25 kHz.
Idan mitar da ake so ta ƙare a .025, .050 ko .075 MHz, dole ne a zaɓi girman matakin 25 kHz.
A al'ada, ana amfani da mai karɓa don nemo tsayayyen mitar aiki. Duk masu karɓar Lectrosonics Digital Hybrid Wireless® suna ba da aikin dubawa don sauri da sauƙi nemo mitoci masu zuwa tare da ɗan ko babu tsangwama na RF. A irin waɗannan lokuta, jami'ai na iya ƙididdige mitar a wani babban taron kamar wasannin Olympics ko babban wasan ƙwallon ƙafa. Da zarar an ƙayyade mitar, saita mai watsawa don dacewa da mai karɓa mai alaƙa.
Zaɓan Ƙaƙƙarfan Audio (Mataki)
Ana iya jujjuya polarity na sauti a wurin watsawa don haka za a iya haɗa sautin da sauran marufofi ba tare da tace tsefe ba. Hakanan za'a iya jujjuya polarity a abubuwan da ake samu.
Saita Ƙarfin Fitar da Mai watsawa
Za a iya saita ƙarfin fitarwa zuwa: SMWB/SMDWB, /X
- 25, 50 ko 100mW/E01
- 10, 25 ko 50mW
Saita Scene da Take Number
Yi amfani da kiban sama da ƙasa don ciyar da Scene gaba da ɗauka da MENU/SEL don kunnawa. Danna maɓallin BACK don komawa zuwa menu.
Zabar abubuwan da za a yi don sake kunnawa
Yi amfani da kiban sama da ƙasa don kunnawa da MENU/SEL don kunna baya.
An yi rikodin File Suna
Zaɓi don suna sunan rikodin files ta lambar jeri ko ta lokacin agogo.
MicroSDHC Bayanin Katin ƙwaƙwalwar ajiya
MicroSDHC Bayanin katin ƙwaƙwalwar ajiya gami da sauran sarari akan katin.
Ana Maido da Tsoffin Saituna
Ana amfani da wannan don mayar da saitunan masana'anta.
Daidaitawa tare da katunan ƙwaƙwalwar ajiyar microSDHC
Lura cewa an tsara PDR da SPDR don amfani da katunan ƙwaƙwalwar ajiyar microSDHC.
Akwai nau'ikan ma'auni na katin SD da yawa (kamar yadda wannan rubutun yake) dangane da iya aiki (ajiya a GB).
SDSC: daidaitaccen iya aiki, har zuwa kuma gami da 2 GB - KADA KA YI AMFANI! SDHC: babban iya aiki, fiye da 2 GB kuma har zuwa kuma gami da 32 GB – AMFANI DA WANNAN IRIN.
SDXC: Ƙarfin ƙarfi, fiye da 32 GB kuma har zuwa kuma gami da 2 tarin fuka - KAR KU YI AMFANI!
SDUC: Ƙarfin ƙarfi, fiye da 2TB kuma har zuwa kuma gami da tarin tarin fuka 128 - KAR KU YI AMFANI!
Manyan katunan XC da UC suna amfani da wata hanyar tsarawa daban da tsarin motar bas kuma basu dace da mai rikodin SPDR ba. Ana amfani da waɗannan yawanci tare da tsarin bidiyo na ƙarni na baya da kyamarori don aikace-aikacen hoto (bidiyo da babban ƙuduri, ɗaukar hoto mai sauri).
Katin ƙwaƙwalwar ajiyar microSDHC KAWAI yakamata a yi amfani da shi. Suna samuwa a cikin iyakoki daga 4GB zuwa 32GB. Nemo katunan Gudun Class 10 (kamar yadda aka nuna ta C wanda aka nannade da lamba 10), ko katunan UHS Speed Class I (kamar yadda lamba 1 ta nuna a cikin alamar U). Hakanan lura da alamar microSDHC.
Idan kuna canzawa zuwa sabon alama ko tushen katin, koyaushe muna ba da shawarar gwaji da farko kafin amfani da katin akan aikace-aikace mai mahimmanci.
Alamomi masu zuwa zasu bayyana akan katunan ƙwaƙwalwar ajiya masu jituwa. Ɗaya ko duka alamun za su bayyana akan mahallin katin da marufi.
Tsarin katin SD
Sabbin katunan ƙwaƙwalwar ajiyar microSDHC sun zo an riga an tsara su tare da FAT32 file tsarin wanda aka inganta don kyakkyawan aiki. PDR ya dogara da wannan aikin kuma ba zai taɓa damun ƙananan tsarin tsarin katin SD ba. Lokacin da SMWB/SMDWB ya “tsara” kati, yana aiwatar da aiki mai kama da Windows “Quick Format” wanda ke goge duka. files kuma yana shirya katin don yin rikodi. Ana iya karanta katin ta kowace madaidaicin kwamfuta amma idan an yi rubutu, gyara ko gogewa zuwa katin ta kwamfutar, dole ne a sake tsara katin tare da SMWB/SMDWB don shirya shi don yin rikodi. SMWB/SMDWB ba ta taɓa yin ƙaƙƙarfan tsarin kati ba kuma muna ba da shawara mai ƙarfi game da yin hakan tare da kwamfutar.
Don tsara katin tare da SMWB/SMDWB, zaɓi Tsarin Katin a cikin menu kuma danna MENU/SEL akan faifan maɓalli.
NOTE: Sakon kuskure zai bayyana idan samples sun ɓace saboda ƙarancin aiki "slow" katin.
GARGAƊI: Kada a yi ƙaramin tsari (cikakken tsari) tare da kwamfuta.
Yin haka na iya sa katin žwažwalwar ajiya mara amfani tare da mai rikodin SMWB/SMDWB.
Tare da kwamfutar da ke tushen Windows, tabbatar da duba akwatin tsari mai sauri kafin tsara katin. Tare da Mac, zaɓi MS-DOS (FAT).
MUHIMMANCI
Ƙirƙirar katin SD yana saita sassa masu jujjuyawa don ingantaccen aiki a cikin tsarin rikodi. The file Tsarin yana amfani da tsarin igiyar ruwa na BEXT (Broadcast Extension) wanda ke da isasshen sarari bayanai a cikin taken don file bayanai da kuma lambar lokaci imprint.
Katin SD, kamar yadda mai rikodin SMWB/SMDWB ya tsara, ana iya lalata shi ta kowane yunƙuri na gyara, canzawa, tsari ko kai tsaye. view da files a kan kwamfuta.
Hanya mafi sauƙi don hana ɓarna bayanai ita ce kwafi .wav files daga katin zuwa kwamfuta ko wasu kafofin watsa labarai da aka tsara na Windows ko OS FARKO.
Maimaita - Kwafi THE FILES FARKO!
Kar a sake suna files kai tsaye akan katin SD.
Kada ku yi ƙoƙarin gyara files kai tsaye akan katin SD.
Kar a ajiye komai a katin SD tare da kwamfuta (kamar ɗauka
log, bayanin kula files da sauransu) - an tsara shi don amfani da rikodi na SMWB/SMDWB kawai.
Kar a bude files akan katin SD tare da kowane shirin ɓangare na uku kamar
Wave Agent ko Audacity kuma ba da izinin ajiya. A cikin Wave Agent, kar a shigo da shi - zaku iya BUDE ku kunna shi amma kar ku adana ko Shigo -
Wave Agent zai lalatar da file.
A takaice -KADA a yi amfani da bayanan da ke kan katin ko ƙara bayanai zuwa katin da wani abu banda na'urar rikodin SMWB/SMDWB. Kwafi da files zuwa kwamfuta, thumb drive, hard drive, da dai sauransu wanda aka tsara azaman na'urar OS na zamani FARKO - sannan zaka iya gyarawa kyauta.
IXML HEADER SPORT
Rikodi ya ƙunshi daidaitattun masana'antu iXML guntu a cikin file masu kai, tare da cike filayen da aka fi amfani da su.
GARANTI SHEKARU DAYA IYAKA
Kayan aikin yana da garantin shekara ɗaya daga ranar siyan saye da lahani a cikin kayan ko aiki in dai an siye shi daga dila mai izini. Wannan garantin baya ɗaukar kayan aikin da aka zagi ko lalacewa ta hanyar kulawa ko jigilar kaya. Wannan garantin baya aiki ga kayan aiki da aka yi amfani da su ko masu nuni.
Idan kowane lahani ya taso, Lectrosonics, Inc., a zaɓi namu, zai gyara ko musanya kowane yanki mara lahani ba tare da cajin ko dai sassa ko aiki ba. Idan Lectrosonics, Inc. ba zai iya gyara lahani a cikin kayan aikin ku ba, za a maye gurbinsa ba tare da wani sabon abu makamancin haka ba. Lectrosonics, Inc. zai biya kuɗin dawo da kayan aikin ku zuwa gare ku.
Wannan garantin ya shafi abubuwan da aka mayar zuwa Lectrosonics, Inc. ko dila mai izini, farashin jigilar kaya wanda aka riga aka biya, cikin shekara guda daga ranar siyan.
Wannan Garanti mai iyaka yana ƙarƙashin dokokin Jihar New Mexico. Ya bayyana duk abin da ke da alhakin Lectrosonics Inc. da duk maganin mai siye don duk wani keta garanti kamar yadda aka bayyana a sama. BABU LECTROSONICS, INC. KO WANDA YA SHIGA CIKIN KIRKI KO KASANCEWAR KAYAN WATA BA ZAI IYA HANNU GA DUK WATA GASKIYA, NA MUSAMMAN, HUKUNCI, SAKAMAKO, KO ILLAR DA KE FARUWA GA WASU AMFANIN AMFANI. KODA ANA SHAWARAR LECTROSONICS, INC. BABU ABUBUWAN DA KE FARUWA HAKKIN LECTROSONICS, INC. BA ZAI WUCE FARAR SAYYANIN KOWANE KAYAN MARA BA.
Wannan garantin yana ba ku takamaiman haƙƙoƙin doka. Kuna iya samun ƙarin haƙƙoƙin doka waɗanda suka bambanta daga jiha zuwa jiha.
581 Laser Road NE
Rio Rancho, NM 87124 Amurka
www.lectrosonics.com 505-892-4501
800-821-1121
fax 505-892-6243
sales@lectrosonics.com
Takardu / Albarkatu
 |
LECTROSONICS SMWB-E01 Masu watsa Makirfon Mara waya da Rikodi [pdf] Jagorar mai amfani SMWB, SMDWB, SMWB-E01, SMDWB-E01, SMWB-E06, SMDWB-E06, SMWB-E07-941, SMDWB-E07-941, SMWB-X, SMDWB-X, SMWB-E01 Mai watsawa mara waya ta Microphone -E01, Mai watsa Makirafan Mara waya da Masu Rikodi, Mai watsa Makirifo da Masu Rikodi, Masu watsawa da Rikodi, Masu rikodi. |