Ecolink WST621V2 Tufafin Zazzabi Sensor Umarnin Jagora

Abubuwan Kunshin

1x Ambaliyar Ruwa da Daskare Sensor
1x Manual shigarwa
1 x CR2450 baturi

Na'urorin haɗi na zaɓi (an haɗa cikin zaɓin kits)

1 x Adaftar Sensor na Waje / Matsayi Mai Haɗawa
2x Dutsen Dama
1x Igiyar Gane Ruwa

Adaftar Sensor na Waje / Matsayi Mai Haɗawa

Fahimtar Abunda

AIKI

An ƙera firikwensin WST-621 don gano ruwa a cikin binciken gwal kuma zai faɗakar da kai tsaye idan akwai. Daskararren firikwensin zai kunna lokacin da zafin jiki ya kasa 41°F (5°C) kuma zai aika maidowa a 45°F (7°C)

YIN RAJIBI

Don shigar da firikwensin, saita panel ɗin ku zuwa yanayin koyo firikwensin. Koma zuwa takamaiman jagorar kwamitin ƙararrawa don cikakkun bayanai akan waɗannan menus.

1. A kan WST-621 gano wuraren pry akan gefuna na firikwensin. Yi amfani da kayan aiki na roba na roba a hankali ko madaidaicin screwdriver don cire saman murfin. (Ba a haɗa kayan aikin ba)
   
   Pry Points
2. Saka baturin CR2450 tare da alamar (+) tana fuskantar sama, idan ba a riga an shigar da shi ba.
   Saka baturi ta wannan hanya
   
3. Don koyo a matsayin firikwensin ambaliyar ruwa, danna ka riƙe maɓallin Koyo (SW1) na tsawon daƙiƙa 1 – 2, sannan a saki. Gajeren kunnawa/kashe ƙiftawa a daƙiƙa 1 yana tabbatar da an fara koyan ambaliyar ruwa. LED ɗin zai kasance da ƙarfi ON yayin watsa koyo. Aikin firikwensin Ambaliyar yana yin rajista azaman Madauki na 1 na Ambaliyar S/N. Maimaita kamar yadda ake buƙata.
   
4. Don koyo a matsayin firikwensin daskare, latsa ka riƙe maɓallin Koyo (SW1) na tsawon daƙiƙa 2 – 3, sannan a saki. Guda ɗaya gajeriyar kunnawa/kashe ƙiftawa a daƙiƙa 1 tare da kunnawa/kashe ƙiftawa sau biyu a cikin daƙiƙa 2 yana tabbatar da cewa an fara daskare koyo. LED ɗin zai kasance da ƙarfi ON yayin watsa koyo. Aikin firikwensin daskare yana yin rajista azaman Madauki 1 na Daskare S/N. Maimaita kamar yadda ake buƙata.
5. Bayan yin nasara cikin nasara, tabbatar da gasket a saman murfin yana zaune da kyau, sannan danna murfin saman saman murfin ƙasa yana daidaita bangarorin lebur. Bincika kabu har zuwa gefen na'urar don tabbatar da an rufe ta gaba daya.
   

Lura: A madadin haka, lambobi masu lamba 7 da aka buga a bayan kowace naúra ana iya shigar da su da hannu cikin kwamitin. Don tsarin 2GIG lambar kayan aiki shine "0637" 

Gwajin Naúrar

Bayan yin nasara cikin nasara, ana iya fara watsa gwajin aika jihohin yanzu ta latsa da kuma sakin Maɓallin Koyi (SW1), tare da buɗe murfin saman. LED ɗin zai kasance da ƙarfi ON yayin watsa gwajin da aka ƙaddamar da maɓallin. Tare da naúrar da aka gama taru kuma an rufe ta, sanya rigar yatsu akan kowane bincike biyu zai haifar da watsa ambaliya. Lura LED ɗin ba zai haskaka don gwajin ambaliyar ruwa mai ruwa ba kuma ya kasance a KASHE yayin duk aiki na yau da kullun.

WURI

Sanya na'urar gano ambaliya a duk inda kake son gano ambaliyar ruwa ko yanayin sanyi, kamar a ƙarƙashin tanki, a ciki ko kusa da injin dumama ruwan zafi, ginshiƙi ko bayan injin wanki. A matsayin mafi kyawun aiki aika watsa gwaji daga wurin da ake so don tabbatar da kwamitin zai iya karɓar shi.

AMFANI DA KAYAN KYAUTA NA ZABI

Na'urorin haɗi na zaɓi suna haɓaka shigarwar Ambaliyar Ruwa da Daskare Sensor ta hanyar ƙyale ƙarin wuraren shigarwa, hawa akan saman saman tsaye kamar bango ko cikin gidan hukuma tare da Adaftar Sensor na Wuta / Dutsen Matsewa da haɗa sukurori. Ana iya saukar da Igiyar Gano Ruwa zuwa ƙasa da ƙetaren bene wanda ke rufe babban wurin ganowa. Tsawon Jaket ɗin Igiyar Gano Ruwa shine wurin ganowa.
Saita

1. Tabbatar da kammala duk matakan rajista kafin shigar da na'urorin haɗi na zaɓi.
2. Toshe Igiyar Gano Ruwa a cikin soket ɗin da ke a ƙarshen Adaftar Sensor na Waje / Maƙuwa Bracket.
3. Kunna Igiyar Gano Ruwa a kusa da ginshiƙan taimako/tsayawa a baya na Adaftar Sensor na Waje / Matsala don hana cire igiyar ba da gangan ba.
4. Yi amfani da sukurori don amintar da Adaftar Sensor na Waje / Matsawa, idan ana so.
5. Daidaita ɓangarorin lebur na Ambaliyar kuma Daskare Sensor tare da ɓangarorin Adaftar Sensor na Waje / Bakin Haɗawa. Sannan danna firikwensin a cikin madaidaicin yana tabbatar da cewa firikwensin ya zauna cikakke kuma shafukan riƙewa guda uku sun cika aiki.
6. Hanya tsayin igiyar Gano Ruwa a saman saman (s) kwance don a sa ido akan ruwa.

Bayanan kula:

• Har zuwa goma (10) Ana iya haɗa na'urorin gano igiya na ruwa tare don ƙara fadada wurin ganowa.
• Da zarar gano ruwa ya faru ta amfani da Igiyar Gano Ruwa, yana iya ɗaukar sa'o'i da yawa kafin igiyar ta bushe sosai kuma a aika siginar maidowa. Ingantacciyar iskar iska zai hanzarta aikin bushewa.
• Haɗin da ba daidai ba tsakanin Ambaliyar WST-621 da Sensor daskarewa, Adaftar Sensor Adaftar / Matsayi na Wuta, da Igiyar Gano Ruwa na iya hana gano ambaliya, ko haifar da dawo da ambaliya ta ƙarya. Koyaushe tabbatar da haɗin gwiwa amintattu ne.

MAYAR DA BATIRI

Lokacin da baturi ya yi ƙasa za a aika sigina zuwa kwamitin sarrafawa. Don maye gurbin baturi:

1. A kan WST-621 nemo wuraren pry akan gefuna daban-daban na firikwensin, a hankali yi amfani da kayan aikin pry na filastik ko daidaitaccen madaidaicin screwdriver don cire murfin saman. (Ba a haɗa kayan aikin ba)
2. Cire tsohon baturin a hankali.
3. Saka sabon baturin CR2450 tare da alamar (+) tana fuskantar sama.
4. Tabbatar cewa gasket a saman murfin yana zaune da kyau, sannan danna murfin saman saman murfin ƙasa, daidaita sassan lebur.
   Bincika kabu har zuwa gefen na'urar don tabbatar da an rufe ta gaba daya.

MAGANAR KIYAYEWA FCC

An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urorin dijital na Class B, bisa ga Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba kuma
2. dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da littafin koyarwa, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa
• Haɗa kayan aiki zuwa wani kanti akan wata kewayawa daban daga mai karɓa
• Tuntuɓi dillali ko gogaggen ɗan kwangila/TV don neman taimako.

Gargadi: Canje-canje ko gyare-gyaren da Ecolink Intelligent Technology Inc. ba su amince da shi ba na iya ɓata ikon mai amfani don sarrafa kayan aikin. Wannan na'urar tana bin ƙa'idodin (s) RSS na lasisin masana'antu Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. wannan na'urar bazai haifar da tsangwama ba, kuma
2. dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.
   C' et appareil est conforme la norme d'Industrie Kanada keɓe lasisin RSS. Son fonctionnement est soumis aux deux yanayi suivantes:
3. ba tare da yin tsokaci ba, da sauransu
4. idan aka yi la'akari da mai karɓar toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de la dispositif.

ID na FCC: XQC-WST621V2 IC: 9863B-WST621V2

GARANTI

Ecolink Intelligent Technology Inc. yana ba da garantin cewa na tsawon shekaru 5 daga ranar siyan cewa wannan samfurin ba shi da lahani a cikin kayan aiki da aikin. Wannan garantin ba zai shafi lalacewa ta hanyar jigilar kaya ko sarrafawa ba, ko lalacewa ta hanyar haɗari, cin zarafi, rashin amfani, rashin amfani, rashin aiki na yau da kullun, rashin kulawa, rashin bin umarni ko sakamakon kowane gyare-gyare mara izini. Idan akwai lahani a cikin kayan aiki da aiki a ƙarƙashin amfani na yau da kullun a cikin lokacin garanti Ecolink Intelligent Technology Inc., a zaɓinsa, zai gyara ko maye gurbin na'urar da ba ta da kyau a dawo da kayan aikin zuwa ainihin wurin siya. Garantin da aka ambata a baya zai yi aiki ne kawai ga mai siye na asali, kuma zai kasance a madadin kowane da duk sauran garanti, ko bayyanawa ko bayyanawa da duk wasu wajibai ko alhaki a ɓangaren Ecolink Intelligent Technology Inc. ba ya ɗaukar alhakin, ko ba da izini ga wani mutum da ke yin zargin yin aiki a madadinsa don gyara ko canza wannan garanti.

Matsakaicin abin alhaki na Ecolink Intelligent Technology Inc. a ƙarƙashin kowane yanayi don kowane batun garanti za a iyakance shi ga maye gurbin samfur mara lahani. Ana ba da shawarar cewa abokin ciniki ya duba kayan aikin su akai-akai don aiki mai kyau.

© 2023 Ecolink Fasaha Fasaha Inc.

Ƙayyadaddun bayanai

Mitar: 319.5MHz
Yanayin Aiki: 32 ° - 120 ° F (0 ° - 49 ° C)
Humidity Mai Aiki: 5-95% RH ba tare da haɗin gwiwa ba
Baturi: 3 2450Vdc lithium CR620 (XNUMXmAH)
Rayuwar baturi: Har zuwa shekaru 8
Gano Daskarewa a 41°F (5°C) yana dawowa a 45°F (7°C)
Gano mafi ƙarancin 1/64th a cikin ruwa Mai jituwa da masu karɓar Honeywell
Tazarar siginar kulawa: 64 min (kimanin)

Kudin hannun jari Ecolink Intelligent Technology Inc.
2055 Corte Del Nogal
Carlsbad CA 92011
855-632-6546
PN WST-621v2 R2.00
RANAR RUWA:
08/23/2023x
ikon mallaka na jiran

Takardu / Albarkatu

Ecolink WST621V2 Sensor Zazzabi na Ruwa [pdf] Jagoran Jagora WST621V2 Sensor Zazzabi na Ambaliyar, WST621V2, Sensor Zazzabi na Ruwa, Sensor Zazzabi, Sensor

Magana

• Manual mai amfani