Autonics PS Series Rectangular Inductive Proximity Sensors Guide Guide

Na gode da zabar samfuranmu na Autonics.
Karanta kuma fahimci littafin koyarwa da jagora sosai kafin amfani da samfurin.
Don amincin ku, karanta kuma ku bi abubuwan tsaro na ƙasa kafin amfani.
Don kare lafiyar ku, karanta ku bi la'akari da aka rubuta a cikin littafin koyarwa, sauran litattafai da Au tonics website.
Ajiye wannan littafin koyarwa a wurin da zaka iya samu cikin sauki.
Ƙayyadaddun bayanai, girma, da sauransu suna ƙarƙashin canzawa ba tare da sanarwa don inganta samfur ba. Wasu ƙila za a iya dakatar da su ba tare da sanarwa ba.
Bi Autonics webshafin don sabon bayani.

La'akarin Tsaro

Kula da duk 'La'akarin Tsaro' don aiki mai aminci da dacewa don guje wa haɗari.

Alamar tana nuna taka tsantsan saboda yanayi na musamman wanda haɗari na iya faruwa.
Gargaɗi Rashin bin umarni na iya haifar da mummunan rauni ko mutuwa.

Dole ne a shigar da na'urar da ba ta da aminci yayin amfani da naúrar tare da injuna wanda zai iya haifar da mummunan rauni ko babban asarar tattalin arziki. (misali sarrafa makamashin nukiliya, kayan aikin likita, jiragen ruwa, ababen hawa, layin dogo, jirgin sama, na'urorin konewa, kayan tsaro, na'urorin kariya na laifi, da dai sauransu) Rashin bin wannan umarni na iya haifar da rauni na mutum, asarar tattalin arziki ko gobara.

Kada a yi amfani da naúrar a wurin da iskar gas mai ƙonewa/ fashewa/ lalata, zafi mai yawa, hasken rana kai tsaye, zafi mai haske, girgiza, tasiri, ko gishiri mai yiwuwa ya kasance.
Rashin bin wannan umarni na iya haifar da fashewa ko wuta.
Kar a sake haɗa ko gyara naúrar.
Rashin bin wannan umarni na iya haifar da gobara ko girgiza wutar lantarki.

Kar a haɗa, gyara, ko duba naúrar yayin da aka haɗa zuwa tushen wuta.
Rashin bin wannan umarni na iya haifar da gobara ko girgiza wutar lantarki.
Duba 'Haɗin kai' kafin yin waya.
Rashin bin wannan umarni na iya haifar da gobara ko girgiza wutar lantarki.
Tsanaki Rashin bin umarni na iya haifar da rauni ko lalacewar samfur.

Yi amfani da naúrar a cikin ƙayyadaddun ƙididdiga.
Rashin bin wannan umarni na iya haifar da lalacewar wuta ko samfur.
Yi amfani da busasshiyar kyalle don tsaftace naúrar, kuma kar a yi amfani da ruwa ko sauran kaushi.
Rashin bin wannan umarni na iya haifar da gobara ko girgiza wutar lantarki.

Kar a ba da wuta ba tare da kaya ba.
Rashin bin wannan umarni na iya haifar da lalacewar wuta ko samfur.

Tsanaki yayin Amfani

Bi umarni a cikin 'Tsakaici yayin amfani'. In ba haka ba, yana iya haifar da hatsarorin da ba zato ba tsammani.

Waya gajarta yadda zai yiwu kuma ka nisanci babban voltage layuka ko layukan wuta, don hana hawan jini da hayaniya. Kada ku yi amfani da kusa da kayan aiki wanda ke haifar da ƙarfin maganadisu mai ƙarfi ko ƙarar mita mai ƙarfi (mai ɗaukar hoto, da sauransu). Idan ana shigar da samfur kusa da kayan aiki wanda ke haifar da karuwa mai ƙarfi (motar, injin walda, da sauransu), yi amfani da diode ko varactor don cire hawan.
Kar a haɗa nauyin ƙarfin aiki zuwa tashar fitarwa kai tsaye.

Ana iya amfani da wannan naúrar a cikin mahalli masu zuwa.
- Cikin gida (a cikin yanayin yanayin da aka ƙididdige shi cikin 'Takaddun bayanai')
- Matsayin max. 2,000 m
- Digiri na 2
– Shigarwa category II

Hankali don Shigarwa

Shigar da naúrar daidai tare da yanayin amfani, wuri, da ƙayyadaddun ƙayyadaddun bayanai.

KADA KA yi tasiri da abu mai wuya ko lankwasawa da yawa na fitar da gubar waya. Yana iya haifar da lalata juriyar ruwa.
KADA KA cire kebul na Ø 2.5 mm tare da ƙarfin juzu'i na 20 N, kebul na Ø 4 mm tare da ƙarfin 30 N ko sama da haka da Ø 5 mm na USB tare da ƙarfin 50 N ko sama da haka. Yana iya haifar da wuta saboda karyewar waya.

Lokacin fadada waya, yi amfani da kebul na AWG 22 ko sama da 200 m.
Tsarkake dunƙule shigarwa tare da ƙarar ƙarfin ƙarfi na 0.59 N m lokacin hawa sashin.

Bayanin oda

Wannan don tunani ne kawai, ainihin samfurin baya goyan bayan duk haɗuwa. Don zaɓar ƙayyadadden ƙira, bi Autonics website.

Jin tsayin gefe
Lamba: Tsawon gefen kai (naúrar: mm)
Hankali nesa
Lamba: Nisan jin (naúrar: mm)

Sarrafa fitarwa
O: Kullum Buɗewa
C: Akan rufe

Abubuwan Samfur

	PSN25	PSN30	PSN40
Bangaren	1 ×	1 ×	1 ×
Bolt	M4 × 2	M4 × 2	M5 × 2

Haɗin kai

Ana iya haɗa LOAD zuwa kowace hanya.

Haɗa LOAD kafin samar da wutar lantarki.

Nau'in kebul

kewayen ciki

Jadawalin Lokacin Aiki

	Akan buɗewa	A al'ada rufe
Ganewa manufa	KasancewaBabu komai	KasancewaBabu komai
Loda	AikiKomawa	AikiKomawa
Aiki nuna alama (ja)	ONKASHE	ONKASHE

Ƙayyadaddun bayanai

Shigarwa	Daidaitawa nau'in
Samfura	PSN25-5A	PSN30-10A	PSN30-15A	PSN40-20A
Ganewa gefe tsayi	mm25 ku	mm30 ku	mm30 ku	mm40 ku
Ganewa nisa	mm5 ku	mm10 ku	mm15 ku	mm20 ku
Saita nisa	0 zuwa 3.5 mm	0 zuwa 7 mm	0 zuwa 10.5 mm	0 zuwa 14 mm
Ciwon ciki	≤ 10% na nesa nesa
Daidaitawa hankali manufa: baƙin ƙarfe	25 × 25 × 1 mm	30 × 30 × 1 mm	45 × 45 × 1 mm	60 × 60 × 1 mm
Martani mita ⁰¹⁾	20 Hz
Soyayya by zafin jiki	± 10% don jin nisa a yanayin zafi 20 ℃
Mai nuna alama	Alamar aiki (ja)
Amincewa
Naúrar nauyi (kunshi)	≈ 66 g (≈ 98 g)	≈ 92 g (≈ 161 g)	≈ 92 g (≈ 161 g)	≈ 130 g (≈ 219 g)

Mitar amsa shine matsakaicin ƙimar. Ana amfani da daidaitaccen maƙasudin ganewa kuma an saita faɗin azaman sau 2 na daidaitaccen maƙasudin ji, 1/2 na nisan ji don nisa.

Ƙarfi wadata	100-240 VAC 50/60Hz, Voltage: 85 - 264 VAC
Leaka halin yanzu	≤ 2.5mA
Sarrafa fitarwa	5 zuwa 200mA
Ragowa voltage	≤10V
Kariya kewaye	Da'irar kariyar karuwa
Insulation nau'in	≥ 50 MΩ (500VDC megger)
Dielectric ƙarfi	Tsakanin duk tashoshi da harka: 1,500 VAC 50/60 Hz na 1 min
Jijjiga	1 mm biyu amplitude a mitar 10 zuwa 55 Hz (na 1 min) a cikin kowane jagoran X, Y, Z na awanni 2
Girgiza kai	500 m/s² (≈ 50 G) a cikin kowane jagorar X, Y, Z na sau 3
Na yanayi zafin jiki	-25 zuwa 70 ℃, ajiya: -30 zuwa 80 ℃ (ba daskarewa ko tari)
Yanayin yanayi	35 zuwa 95 % RH, ajiya: 35 zuwa 95 % RH (ba daskarewa ko daskarewa)
Kariya rating	IP67 (IEC matsayin)
Haɗin kai	Nau'in na USB
Waya takamaiman	Ø 4 mm, 2-waya, 2 m
Mai haɗawa takamaiman	AWG 22 (0.08 mm, 60-core), diamita insulator: Ø 1.25 mm
Kayan abu	Case: ABS mai jurewa zafi, daidaitaccen nau'in USB (baƙar fata): polyvinyl chloride (PVC)

Girma

Naúrar: mm, Don cikakkun bayanai, bi Au tonics website.

Alamar aiki (ja)
B Taɓa rami
PSN25

PSN30

PSN40

Saitin Tsarin Nisa

Ana iya canza nisa ta hanyar siffa, girman ko kayan abin da aka nufa.
Don kwanciyar hankali, shigar da naúrar tsakanin kashi 70% na nisan ji.
Nisa saitin (Sa) = Nisan jin (Sn) × 70 %

Tsangwamar juna & Tasiri ta Kewaye Karfe

Tsangwama tsakanin juna
Lokacin da aka ɗora firikwensin kusancin jam'i a jere na kusa, ana iya haifar da rashin aiki na firikwensin saboda tsangwama tsakanin juna.
Don haka, tabbatar da samar da mafi ƙarancin tazara tsakanin firikwensin biyu, kamar yadda ke ƙasan tebur.

Tasiri ta wurin karafa da ke kewaye
Lokacin da aka ɗora na'urori masu auna firikwensin akan karfen ƙarfe, dole ne a hana na'urori masu auna firikwensin kowane abu na ƙarfe ya shafe shi banda manufa. Saboda haka, tabbatar da samar da mafi ƙanƙanta
nisa kamar yadda yake ƙasa ginshiƙi.

Samfura Abu	PSN25	Saukewa: PSN30-10	Saukewa: PSN30-15	PSN40
A	30	60	90	120
B	40	50	65	70
c	4	5	5	5
d	15	30	45	60
m	20	25	35	35

18, Ban song 513Beon-gil, Sundae, Busan, Jamhuriyar Koriya, 48002
www.autonics.com
+ 82-2-2048-1577
sales@autonics.com

Takardu / Albarkatu

	Autonics PS Series Rectangular Inductive Proximity Sensors [pdf] Jagoran Jagora PS Series Rectangular Inductive Proximity Sensors, PS Series, Rectangular Inductive Proximity Sensors, Inductive Proximity Sensors, Proximity Sensors, Sensors
	Autonics PS Series Rectangular Inductive Proximity Sensor [pdf] Jagoran Jagora PS Series, PS Series Rectangular Inductive Proximity Sensor, Rectangular Inductive Proxim Sensor, Inductive Proximity Sensor, Sensor Proximity Sensor

Magana

Manual mai amfani

PS Series Rectangular Inductive Proximity Sensors