Leading manufacturer of solar charge controllers, off-grid inverters, and renewable energy power solutions.
EPEVER (Beijing Epsolar Technology Co., Ltd.) is a prominent global manufacturer established in 2007, specializing in solar power electronics and renewable energy solutions. The company researches, manufactures, and markets a robust lineup of products including MPPT and PWM solar charge controllers, pure sine wave inverters, inverter chargers, and solar lighting drivers.
EPEVER is widely recognized in the DIY solar community and industrial sectors for delivering reliable, high-efficiency power management systems certified to international standards such as ISO9001 and ISO14001. With a presence in over 120 countries, EPEVER focuses on technological innovation to make off-grid and hybrid solar systems accessible and efficient. Their product range serves diverse applications from RVs and marine setups to remote telecommunication stations and residential solar installations.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
On most EPEVER controllers (like the Tracer-AN or XTRA series), press the SET button until the battery type icon flashes. Use the navigation buttons to select your battery chemistry (Sealed, Gel, Flooded, or Lithium/User modes), then hold SET or the designated confirmation button to save the selection.
Yes, modern EPEVER controllers support lithium batteries (LiFePO4). You can often select preset lithium modes (like LFP4S, LFP8S) or use the "User" mode to define custom parameters via the PC software, mobile app, or MT50 remote meter.
A flashing red fault light typically indicates a system error such as battery over-voltage, over-discharge, load short circuit, or controller overheating. Consult the "Troubleshooting" section of your specific user manual to identify the code associated with the flash pattern.
Connect the MT50 remote meter to the controller's RJ45 communication port using the supplied RS485 cable. The meter is powered directly by the controller ensuring easy real-time monitoring without external power sources.