MT50 Remote Meter
“
Specifications
- Product Name: MT50 Remote Meter
- Compatibility: Controllers designed with RS485
communication - Features:
- Easy installation and operation
- Real-time display of fault alarms
- Local reading of real-time parameters
- Powered by the controller directly
- Equipped with an RJ45 communication port
Product Usage Instructions
1. Installation
Ensure the MT50 is not installed in a location with strong
electromagnetic interference. Connect the MT50 to the controller
using the provided RS485 communication cable (CC-RS485-RS485-200U)
or a suitable communication cable if the controller does not have a
standard RJ45 interface.
2. Operation
To operate the MT50:
- Use the navigation buttons to move the cursor and select menu
items. - Press OK to enter or exit pages.
- Press Esc to enter the Main Menu.
The Main Menu options include:
- Monitoring
- Device Info
- Test Operation
- Control Parameters
- Load Settings
- Device Parameters
- Device Password
- Factory Reset
- Failure Information
- Meter Parameters
Frequently Asked Questions (FAQ)
Q: What should I do if the Failure Indicator flashes?
A: In case of failure, refer to the Controller Manual for
further information on resolving the issue.
Q: How do I know the communication status with the
controller?
A: The Communication Indicator on the MT50 will display the
communication status when connected with the controller.
Q: How do I connect the MT50 to the controller?
A: Use the RJ45 interface on the MT50 and connect it to the
controller using a communication plug marked with MT.
“`
General Information
1.1 Features
The MT50 remote meter, using with the controllers designed with RS485 communication, can monitor the controller’s real-time working status and program the parameters.
Features:
1. Easy to install and operate 2. Real-time display of fault alarms 3. Locally reading of real-time parameters 4. Powered by the controller directly 5. Equipped with an RJ45 communication port
1.2 Main functions Functions like real-time monitoring of system data, browsing and modifying related parameters, and restoring factory defaults are based on the LCD and functional key operation.
1.3 Recommendations
l Applicable Models Product series LS-B, GM-N,
VS-BN, Tracer-BN iTracer-AD/ND
Tracer-BP
Tracer-AN, TRIRON, XTRA
Battery Interface Communi
type
type
cation
RJ45 Battery
3.81-4P
Battery
Lithium battery
RS485 waterproof
port
RJ45
RS485
Note: 1. Please do not install the MT50 in a situation with strong electromagnetic interference. The MT50 comes standard with an RS485 communication cable (CC-RS485-RS485-200U). If it is connected to a controller that is not a standard RJ45 interface, please purchase an appropriate communication cable in advance.
Product Features
Module Failure indicator
Function
Failure indicator flashes in case of failure of the connected devices. For failure information, please check the Controller Manual.
Communication Indicate communication status when MT50 is connected with the controller.
indicator
Display screen Man-machine interaction operation interface.
Buttons
The Meter buttons include four navigation buttons and two operational buttons. See the specific directions in the Operational Manual.
RJ45 interface Connect with the controller; it is used for communication and power supply.
Note: Please use the communication plug, marked with “MT,” to connect MT50.
Main menu
Enter the Main Menu by pressing “Esc.” The “Up” and “Down” buttons are respectively used to move the cursor to select the menu items, “OK,” and “ESC” buttons are respectively used to enter or exit the corresponding pages of the menu items.
1. Monitoring 2. Device Info. 3. Test Operation 4. Control Para.
5. Load Set 6. Device Para 7. Device PSW. 8. Factory Reset
9. Failure Info. 10. Meter Para.
Documents / Resources
 | EPEVER MT50 Remote Meter [pdf] Instruction Manual Tracer-AN, TRIRON, XTRA, MT50 Remote Meter, MT50, Remote Meter, Meter |