Chauvet DJ is a premier brand offering professional lighting fixtures, controllers, D-Fi technology, and atmospheric effects for mobile entertainers and events.
Chauvet DJ, produced by Chauvet & Sons LLC, specializes in professional-grade lighting and stage effects designed for mobile entertainers, DJs, nightclubs, and corporate events. They offer a diverse lineup of high-quality products including LED pars, moving heads, atmospheric effect machines, wireless D-Fi transmitters, and versatile telescoping stands like the FLEXstand.
Recognized for bringing professional theatrical lighting to a broader market, Chauvet DJ provides accessible DMX technology without sacrificing performance or durability. Proper setup is essential for stage lighting products, making their detailed official user manuals vital for navigating complex DMX channel configurations, mastering wireless synchronization, and safely mounting fixtures.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
You can typically set the DMX address using the control panel and digital display on the front or rear of the fixture. Navigate the menu to the DMX addressing section and use the Up/Down buttons to select your channel. Refer to your specific product's user manual for exact menu maps.
You can register your new Chauvet DJ gear for warranty protection at www.chauvetlighting.com/warranty-registration if you are in the US or Mexico. Customers in Europe can register at www.chauvetlighting.eu/warranty-registration.
Set your primary D-Fi Hub to transmit mode (green indicator) and assign it a specific channel (1-16). Ensure your receiving fixtures or secondary D-Fi Hubs are set to receive mode (red indicator) on that exact same channel to establish the connection.
First, check that both the controller and the fixture are operating on the same DMX universe and channel. Ensure the DMX cables are firmly secured and correctly routed (DMX Out from controller to DMX In on the fixture). Test with a differet cable to rule out shorts.